How Long Should Your Factory Lease Term Be in Rawang, Serendah or Shah Alam? 2+1 vs 3+3, the Renewal Option, Rent Reviews and the Three-Year Registration Rule
For most factory tenancies in Rawang, Serendah and Shah Alam, two or three years with a written option to renew (2+1 or 3+3) is usual. Three years is the legal line: up to three years needs no registration; anything longer is a lease registered with Form 15A. The renewal option does not count towards the three years.
Key Takeaways
- Three years is the line. Under the National Land Code, a factory tenancy of three years or less needs no registration and is valid even by word of mouth. A term of more than three years is a lease, granted in Form 15A and registered on the title (National Land Code, sections 213, 221 and 223).
- The renewal option does not count. Section 224 ignores an option to renew when a fixed term is measured, so a 3+3 is a three-year tenancy, while a straight six-year term is a lease.
- Two years is what the registered deals show. JPPH-registered factory tenancies have a typical term of 24 months in Rawang & Kundang and in Shah Alam, and 21 months in Serendah.
- Write the option and the rent formula down. An option given only by word of mouth cannot be enforced against a buyer of the factory, and "rent to be agreed" leaves nothing to fall back on.
- A sale can undo an unprotected tenancy. An unregistered tenancy does not bind a later buyer or bank unless it was endorsed on the title first, so a tenant who spends heavily on the unit should ask about the endorsement at signing.
What do 2+1 and 3+3 mean in a factory tenancy?
In tenancy talk around Rawang and Shah Alam, "2+1" is used for two different things. Sometimes it is the deposit: two months' rent as security plus one month for utilities. Sometimes it is the term: two years fixed plus an option for one more. "3+3" nearly always means a three-year term with an option to renew for three more. Because the same shorthand covers both money and time, I ask both sides to write the term, every option and each deposit out in words in the agreement, never as a formula. I explain break clauses and leaving before the term ends in my guide to ending a factory tenancy early.
The registered deals show that most factory tenancies here are short. In the JPPH-registered data that FactoryHub aggregates, the typical term is 24 months in Rawang & Kundang (25 registered factory tenancies in 24 months) and in Shah Alam (119), and 21 months in Serendah (30). These are the registered records only, not every tenancy signed, but they make a two-year term with an option the usual starting point. The Rawang & Kundang transaction prices and rents and Shah Alam transaction prices and rents list the deals behind these figures.
How long a term do I suggest for a factory?
I start from one question: how long does the tenant need to stay to earn back what it will spend on the unit? A tenant that moves in with pallets and a forklift can live with two years. A tenant that pays for a power upgrade, a mezzanine, racking, an effluent system or its own licences needs a term, plus options, that outlasts the payback. The council business licence (Majlis Perbandaran Selayang covers Mukim Rawang, MPS; MPHS covers Serendah, Bukit Beruntung and Sungai Choh; MBSA covers Shah Alam), the Bomba fire certificate where it applies and a TNB supply change all cost time and money, and none of them moves with the tenant.
| What the tenant plans | The term I look at |
|---|---|
| Storage or light assembly, little fit-out | Two years with a one or two-year option |
| Machines, racking or a power upgrade paid by the tenant | Three years with a three-year option (3+3), sometimes a further option |
| Build-to-suit, its own substation or a long supply contract | A registered lease of more than three years |
| Its own building on rented land | A registered lease, see renting industrial land instead of a factory |
Landlords weigh the same term from the other side: a longer term means steady rent but less room to reset it, which is why the review clause matters as much as the length. My guide for owners on screening a factory tenant covers the rest of the landlord's side. I am an estate agent, not a lawyer: the agreement itself should be drafted or checked by a lawyer.
Where is the three-year line, and when must a factory lease be registered?
The National Land Code sets the rule, and it applies to every title in Selangor:
- Up to three years: section 223 lets the owner grant a tenancy of three years or less. Section 213 calls it a "tenancy exempt from registration": it is valid in writing or by word of mouth, and it cannot be registered.
- More than three years: section 221 makes it a lease, granted by an instrument in Form 15A. The longest term is 99 years for the whole lot and 30 years for part of it. Section 228A says part of a building counts as part of the land, so a lease of one unit in a building on a single title falls under the 30-year limit.
- Options are not counted: section 224 says that for a fixed term, no account is taken of the fact that it can be renewed under an option. A 2+1 and a 3+3 are both tenancies; a five-year term with no break is a lease.
- Until it is registered: section 206 says an instrument creates no interest in the land until it is registered, though it still works as a contract between landlord and tenant. LHDN's stamp duty guideline puts it plainly: a lease of more than three years is executed together with Form 15A and must be registered at the land office (LHDN guideline on First Schedule instruments).
| Term written in the agreement | What it is in law | Registration | Stamp duty per RM250 of annual rent |
|---|---|---|---|
| One year | Tenancy | Not registrable, endorsement possible | RM1 |
| Two or three years (2+1, 3+3) | Tenancy, option not counted | Not registrable, endorsement possible | RM3 |
| Four or five years fixed | Lease | Form 15A, registered | RM5 |
| Six years or more fixed | Lease | Form 15A, registered | RM7 |
What does registering a factory lease involve in Selangor?
The title tells you where the lease goes. For a Registry title (a grant or a State lease, the Geran and PN titles), the Registrar is the Registrar of Titles at the Selangor Land and Mines Office (PTG Selangor). For a Land Office title (a Mukim grant or Mukim lease, GM and PM), it is the Land Administrator of the district: the Gombak District and Land Office for lots in Mukim Rawang, and the Hulu Selangor District and Land Office in Kuala Kubu Bharu for Mukim Serendah and Mukim Batang Kali.
PTG Selangor's checklist for registering a lease asks for (PTG Selangor lease checklist):
- Form 15A, original and duplicate, attested by a Land Administrator or an advocate and solicitor.
- The original computer-printed issue document of title.
- This year's quit rent receipt, and the assessment (cukai pintu) receipt in the current owner's name.
- The original stamp certificate from LHDN.
- Consent letters where the title needs them: the State Authority for a restriction in interest, and the chargee, caveator or existing lessee where there is a charge, caveat or lease.
- A plan of the leased area when only part of the lot is leased.
Late filing costs more. Section 293 adds a delayed registration fee for each completed three months after the instrument's date, up to five times the normal fee. PTG Selangor's fee list, as circulated by the Selangor Bar in 2020, shows RM100 to register a Form 15A lease (fee list); confirm the current fee when you file.
Three title checks come before anyone signs:
- A bank charge. Section 226 says an owner whose land is charged cannot grant a lease, or even a short tenancy, without the chargee's consent, given in writing for a tenancy. If the owner bought with a loan, the title search will show the charge, so I check it before a tenancy is drafted.
- A restriction in interest. Section 225 makes every lease subject to the restrictions on the title. Where a Selangor title says it cannot be leased (dipajak) without State consent, the owner applies for Kebenaran Pajakan, which PTG Selangor lists under the Menteri Besar's authority. Since 26 October 2024 every consent application in Selangor runs end to end on e-Tanah (PTG Selangor consent FAQ).
- A foreign tenant. PTG Selangor also lists a consent for a tenancy to a foreign citizen or company under section 433B, decided by the PTGS Director. Under section 433A, a Malaysian company counts as foreign when non-citizens or foreign companies hold 50% or more of its voting shares. If your company is in that position, ask the lawyer whether that consent applies to your tenancy.
Can a sale of the factory undo my 3+3 before the renewal?
It can, unless you protect it, and this is the point tenants overlook most. Section 213(3) says a tenancy exempt from registration does not bind a later buyer, a later lessee or a bank that takes a charge, unless the tenancy was endorsed on the register document of title before that dealing. A buyer can still agree in the sale contract to take the factory subject to the tenancy, but that is the buyer's choice, not the tenant's right.
Section 316 lets the tenant apply to the Registrar for the endorsement, and the Registrar records "Exempt tenancy claimed" with the time it takes effect (section 317). If the land is charged, the application needs the chargee's consent. The same fee list shows RM100 for a tenancy endorsement on the whole lot.
The option needs the same care. Section 228 allows a tenancy to give the tenant an option to renew, but an option in an oral tenancy cannot be enforced against someone who later buys the reversion. When a tenant spends on the unit and plans to use the option, I suggest asking the lawyer about the endorsement at signing, not when a sale is already under way.
How should the renewal option and rent review be written?
A renewal option is only as good as its wording. When I read a draft I look for:
- The window. The dates within which the tenant must give written notice to renew. Miss the window and the option is gone.
- The conditions. Usually that rent is paid and the covenants are kept. Ask that a minor breach already put right does not cancel the option.
- The new term. A three-year renewal keeps it a tenancy; a longer renewal turns it into a lease that has to be registered.
- The renewal rent. A fixed figure, a fixed increase, or market rent with a floor, a cap and a named way to settle a dispute, such as a registered valuer appointed by both sides. An option that only says "rent to be mutually agreed" gives the tenant nothing to enforce when the two sides cannot agree.
- What else changes. Whether the deposit is topped up to the new rent, and who pays the legal and stamping costs of the renewal agreement.
For a market review, the evidence that carries weight is registered rent, not asking rent. JPPH-registered factory tenancies over 24 months show a median of RM1.39 psf/month in Rawang & Kundang (typical RM0.91 psf/month to RM2.22 psf/month), RM1.71 psf/month in Shah Alam (typical RM1.28 psf/month to RM2.47 psf/month) and RM0.95 psf/month in Serendah (typical RM0.70 psf/month to RM1.10 psf/month). Compare like with like: a terrace factory against terrace factories, a detached factory against detached ones.
Step-ups inside a long term are a rent review written in advance. LHDN's table is based on the annual rent or the average annual rent, so a lease with rising rent is stamped on its average over the term.
How does the term change the stamp duty?
Item 49(a) of the Stamp Act charges duty per RM250 of annual rent, or part of RM250, by the length of the term: RM1 for up to one year, RM3 for more than one and up to three years, RM5 for more than three and up to five years, and RM7 for more than five years. The tenant pays the duty on the original and the landlord on the copy. Once the lease agreement is duly stamped, the Form 15A itself carries a fixed RM10 duty (same LHDN guideline).
Worked on the registered median rent for a Shah Alam terrace factory, RM4,400 a month: RM52,800 a year is 211.2 units of RM250, which counts as 212.
| Term | Rate per RM250 | Duty |
|---|---|---|
| Two or three years (2+1, 3+3) | RM3 | RM636 |
| Five years | RM5 | RM1,060 |
| Six years | RM7 | RM1,484 |
On a 3+3, the renewal agreement is a new instrument (LHDN lists the tenancy renewal agreement among its examples), stamped on the renewal rent when it is signed. Since 1 January 2026 tenancies are stamped under the Stamp Duty Self-Assessment System on MyTax (LHDN STSDS). Stamp within 30 days of signing; after that the penalty is RM50 or 10% of the deficient duty, whichever is higher, within three months, and RM100 or 20% beyond that (LHDN stamp duty penalties). FactoryHub's tenancy stamp duty calculator works it out for your own rent and term.
What I check before a client signs
When a client is about to sign for a factory for rent in Rawang, Serendah or Shah Alam, I go through the title search (owner, charge, restriction in interest, and the expiry date of a leasehold title against the term asked for), the term and every option written out in words, the renewal rent formula, and whether the deal needs Form 15A or would be safer with an endorsement. The approvals, power and licence checks are in my guide on what to check before renting a factory in Rawang, and the tenure side in freehold vs leasehold factories.
If you are weighing a 2+1 against a 3+3 for a factory in Rawang, Serendah or Shah Alam, WhatsApp Jason Low, Probationary Estate Agent PEA 1478 with CID Realtors, on +60 12-288 1834.
Also answered on this site: Who pays stamp duty on a factory tenancy, and how much?
Questions people ask
01Can a factory tenancy agreement be longer than three years in Malaysia?+
Yes, but a term of more than three years is a lease under section 221 of the National Land Code, granted in Form 15A and registered on the title. The limit is 99 years for a whole lot and 30 years for part of one, and part of a building counts as part of the land. Until it is registered it works only as a contract between landlord and tenant, not as an interest in the land.
02Does a 3+3 factory tenancy need to be registered?+
No. Section 224 of the National Land Code says a renewal option is not counted when a fixed term is measured, so a three-year term with a three-year option is a tenancy exempt from registration. To protect it against a later sale or charge, the tenant can apply to have it endorsed on the title under section 316.
03What does 2+1 mean in a factory tenancy agreement?+
It is used for two things: a deposit of two months' rent plus one month for utilities, or a term of two years plus a one-year option to renew. Because the shorthand is ambiguous, write the term, the option and each deposit out in words in the agreement.
04How do I renew a factory tenancy agreement?+
Give written notice within the window the option sets and meet its conditions, usually rent paid and covenants kept. Then sign a renewal agreement on the rent the clause produces. The renewal agreement is a new instrument for stamp duty and must be stamped within 30 days of signing.
05What happens to my factory tenancy if the landlord sells?+
Under section 213(3) of the National Land Code, a tenancy exempt from registration does not bind a later buyer or bank unless it was endorsed on the title before the sale or charge, or the buyer agrees to take the factory subject to it. A registered lease stays on the title. Tenants who invest in a unit should ask their lawyer about the endorsement when they sign.
06What clauses should a factory lease in Rawang or Shah Alam include?+
It should write out the term and each renewal option in words, and set the renewal rent formula, the deposits, and who pays the stamp duty and legal costs. Before signing for a factory in Rawang, Serendah or Shah Alam, also search the title for a bank charge or a restriction in interest, because an owner whose land is charged needs the chargee's written consent to let it. Ask your lawyer as well whether the tenancy should be endorsed on the title under section 316.
Sources
- National Land Code (Revised 2020), Act 828: sections 206, 213, 221 to 228A, 293, 316 to 317, 433A and 433B
- PTG Selangor: Senarai semak urusan pendaftaran pajakan dan pajakan kecil (Borang 15A/15B)
- PTG Selangor: Soalan lazim urusan kebenaran (consent) dan e-Tanah
- PTG Selangor registration fee list, circulated by the Selangor Bar (2020)
- LHDN: Garis panduan pengenaan duti setem bagi surat cara yang tertakluk kepada Jadual Pertama Akta Setem 1949
- LHDN: Stamp duty penalties
- LHDN: Stamp Duty Self-Assessment System (STSDS)
- Pejabat Daerah dan Tanah Gombak: mukim of Gombak district
- Pejabat Daerah dan Tanah Hulu Selangor: pentadbiran mukim
- Pejabat Daerah dan Tanah Hulu Selangor: soalan lazim and office address, Kuala Kubu Bharu
- Majlis Perbandaran Selayang: kawasan pentadbiran
- FactoryHub: Rawang & Kundang JPPH-registered industrial transactions and rents
- FactoryHub: Shah Alam JPPH-registered industrial transactions and rents
- FactoryHub: Serendah JPPH-registered industrial transactions and rents
- FactoryHub: Tenancy stamp duty calculator
Units on the market nearby
Semi-D Factory for Rent in Saujana Teknologi Rawang, Rawang, 6,525 sq ft
RM 10,500/month
Semi-Detached Factory for Sale or Rent in Saujana Rawang, Rawang, 8,000 sq ft
RM 4,000,000 · RM 15,000/month
Detached Factory for Rent in Batu 17 Rawang, 9,000 sq ft
RM 21,000/month
More on renting a factory or warehouse
- Can You Sublet or Split a Factory in Rawang, Serendah or Shah Alam? Landlord Consent, Council and Bomba Rules, Insurance and Meters
- Tenant Renovations and Reinstatement Works in a Rawang, Serendah or Shah Alam Factory: Landlord Consent, Council Permits, Who Keeps the Fit-Out and the Deposit
- Renting Industrial Land Instead of a Factory in Rawang or Serendah: What Changes and What I Check First
- What to Check Before Renting a Factory in Rawang: Approvals, Power, Licences and Rent