Sell a Factory With a Tenant or Vacant in Rawang, Serendah or Shah Alam? Who Buys Each, How the Remaining Term Moves the Price, and Whether Renovation, Power or Solar Pays

Written by , PEA 1478 · Published · Selling or letting your factory

Short answer

Sell vacant when the likely buyer is a manufacturer moving in, and tenanted when the rent sits within registered rents and enough term remains for investors. Tenancy adds value only if a valuer accepts the rent as sustainable. Renovation, more power or solar mostly widen the buyer pool and raise the price only when approved, documented and transferable.

Two semi-detached factories at golden hour, one with rooftop solar panels and pallets inside, the other empty, with a small substation kiosk by the fence.
Illustrative image

Key Takeaways

  • The likely buyer decides the answer. A manufacturer or logistics firm that will move in needs vacant possession on a fixed date; an investor buys the rent, the tenant and the time left on the term. The sitting tenant can be a third buyer.
  • A tenancy adds value only when the rent holds up. The Board of Valuers' draft standard on valuation methods asks valuers to set rental income by reference to rents of similar properties and to say whether the rent is sustainable, so a rent far above registered rents will not be counted in full.
  • Three years left is longer than most factory tenancies here. JPPH-registered factory tenancies typically run 24 months in Rawang, Kundang and Shah Alam and 21 months in Serendah. A unit with three years to run suits an investor and rules out an owner-occupier unless the tenant agrees to leave.
  • Renovation, power and solar mostly widen the pool of buyers. They lift the price only when they are approved, documented and transferable: council permits for building work, TNB papers for the supply, and SEDA and TNB papers for a solar system.
  • Sell now or hold is partly a tax date. An individual Malaysian citizen pays no RPGT from the sixth year of ownership; a Malaysian company still pays 10%.

Vacant or tenanted: who buys each in Rawang, Serendah and Shah Alam?

When an owner asks me whether to sell with the tenant inside or wait until the unit is empty, I start with a different question: who is most likely to buy it? The two main groups read the same factory in different ways.

Buyer What they need What they check first How the sale is written
Owner-occupier (a manufacturer or logistics firm moving in) An empty factory by a fixed date Power supply, container truck access, approvals, ceiling height With vacant possession, completion tied to the handover
Investor (an individual or a company) Rent paid on time and enough term left Rent against registered rents, the tenant's payment record, deposits, the stamped agreement Subject to the tenancy, with deposits and rent apportioned at completion
The sitting tenant To stay and stop paying rent Price against registered deals, its own expansion plans Vacant possession to the tenant itself; check for an option to purchase
An investor in a sale and leaseback You stay on as the tenant Whether the rent you set matches registered rents Subject to a new tenancy that the buyer's valuer will test

The sitting tenant is worth asking first. It knows the building, its machines are installed, and section 228(1) of the National Land Code allows a tenancy to give the tenant an option to buy the property itself. Read your tenancy agreement before you speak to anyone else: if it contains an option, the whole sale has to be planned around it.

The price level shapes who turns up. In the 24 months to August 2026, JPPH-registered semi-detached factory sales had a median of RM4.3 million (RM380 psf of land) in Rawang and Kundang, RM3.16 million (RM213 psf of land) in Serendah and RM5.92 million (RM514 psf of land) in Shah Alam, while terrace factories in Serendah had a median of RM245,000 (RM114 psf of land). FactoryHub keeps the registered records for Rawang and Kundang, Serendah and Shah Alam. At several million ringgit, many buyers of either kind finance part of the price, so the bank's valuer becomes one more reader of your tenancy.

Is a tenanted factory worth more than a vacant one?

Not automatically. The Board of Valuers, Appraisers, Estate Agents and Property Managers' draft standard on valuation methods (LPPEH, MVS on approaches and methods) lists the comparison method and the investment method among the common methods, and for the investment method it requires that:

  • the gross income is set by reference to prevailing rental values of similar properties, with the evidence shown in the report
  • the valuer says whether the rent used is sustainable
  • a valuer who does not use the current rent passing explains why

Put simply, the valuer checks your tenant's rent against what similar factories rent for. These are JPPH-registered factory tenancies over the same 24 months, per sq ft of rented floor area per month:

Area Registered tenancies Median rent Typical range Typical term
Rawang and Kundang 25 RM1.39 psf RM0.91 to RM2.22 psf 24 months
Serendah 30 RM0.95 psf RM0.70 to RM1.10 psf 21 months
Shah Alam 119 RM1.71 psf RM1.28 to RM2.47 psf 24 months

In Shah Alam the registered median is RM2.12 psf a month for semi-detached factories and RM1.50 psf a month for detached factories, so compare within the same type. These are the registered records available so far, not every tenancy in each area.

This is how I read the four situations I meet most often:

Your tenancy Effect on buyers Effect on price
Rent inside the registered range, tenant pays on time, a long term left Investors compete; owner-occupiers wait or walk away The income supports the price, if the payment record is documented
Rent well above the registered range Investors are interested, but the bank's valuer may not count the excess A buyer who borrows can only pay what the valuation supports plus their own cash
Rent below the registered range with a long term left Owner-occupiers cannot use it; investors price in the low rent Usually the weakest position for a seller
Tenancy ending soon, with the move-out date in writing Both groups can look at it You can sell to whichever group pays more

One thing these medians cannot give you is a yield. Registered sale prices here are per sq ft of land, while rents are per sq ft of floor area, so work out the yield on your own unit: twelve months of rent divided by the price you are asking.

My factory has three years of tenancy left: can I sell it to an investor?

Yes, and an investor is the natural buyer, because an owner-occupier cannot move in for three years unless your tenant agrees to leave. Three years to run is longer than the typical registered term in Rawang, Kundang and Shah Alam (24 months) or Serendah (21 months), which counts in your favour with investors when the rent and the tenant are sound.

This is what the National Land Code says about the tenancy you are selling with:

  • A term of up to three years is a tenancy exempt from registration (sections 213(1)(a) and 223), and an option to renew is ignored when its length is counted (section 224(b)).
  • A longer term is a lease. Section 221 says a lease is for a term exceeding three years and is granted in Form 15A. If your agreement was signed for more than three years in total and never registered, ask a lawyer how it should be treated before you list, because an investor's lawyer will ask the same question.
  • It binds a buyer by law only in some cases. Under sections 213(3) and 215(3)(b), an exempt tenancy binds a later buyer only if it was endorsed on the title before the transfer, and section 316 lets the tenant apply for that endorsement. Without an endorsement, the buyer takes the tenancy over because your sale and purchase agreement (SPA) sells the factory subject to it.
  • Its terms pass to the buyer. Section 216 makes every provision of the tenancy enforceable by or against the buyer once the land is transferred subject to it, refund of the deposit included. So the deposit money should go across to the buyer at completion.
  • Your bank's consent matters if the title is charged. Section 226 says the owner of charged land cannot grant a tenancy without the chargee's consent, given in writing. An investor's lawyer will ask to see it.

Before I list a tenanted factory, I ask the owner for the stamped tenancy agreement, every renewal letter, the deposit receipts and twelve months of rent records. LHDN states that an instrument which has not been properly stamped cannot be used as evidence in court, so an unstamped tenancy is income a buyer cannot rely on. I also read the access clause, because viewings and the buyer's valuer have to get inside while the tenant is still operating. My guide for buyers of a tenanted factory shows the same file from the other side of the table.

If you would rather sell vacant, plan the dates around the tenancy. Section 7(2) of the Specific Relief Act 1950 says that once a tenancy has ended, an occupier who stays on can only be removed through court proceedings. A buyer who needs the factory empty will want the tenant's signed move-out date or surrender before committing.

Should I sell now or keep collecting rent?

Nobody can tell you where prices will go, and I do not forecast them. What I put in front of an owner are the dates and figures that are already known.

RPGT by holding period (HASiL):

When you sell Individual Malaysian citizen Malaysian company
Within 3 years 30% 30%
In the 4th year 20% 20%
In the 5th year 15% 15%
6th year onwards 0% 10%

My RPGT guide covers the amount the buyer retains and the 2026 changes. The other points I go through:

  • The registered direction of prices. Like-for-like (same park, same type), last 12 months against the 12 before: industrial land in Rawang and Kundang +12% across 5 parks; terrace factories in Serendah +4% across 3 parks and industrial land there +3% across 5 parks; in Shah Alam, semi-detached factories -32% across 3 parks and terrace factories -11% across 5 parks. That is history, not a forecast.
  • The tenancy calendar. Selling with a long term left suits investors. Selling near expiry, with the tenant's intentions in writing, lets you choose between both groups. Selling halfway through with no answer from the tenant is the hardest position to price.
  • Work coming up. A roof, wiring or fire system due for replacement in the next few years is a cost a buyer will price in whether you hold or sell.
  • Lease years left. On a leasehold title, every year you hold is a year off the remaining term that a buyer and their bank will count.

Will renovation raise the price, or only make the factory easier to sell?

Mostly the second. Under the comparison method a valuer analyses the differences between your factory and similar units that have sold, so sound condition counts. A fit-out shaped around your own process often does not, because buyers of semi-detached and detached factories usually fit them out again for their own machines.

Two rules decide what renovation is worth to a seller:

  • It has to be approved. Section 70(1) of the Street, Drainage and Building Act 1974 says no one may erect a building without the local authority's prior written permission. Majlis Perbandaran Selayang covers Mukim Rawang, which takes in Rawang and Kundang (MPS), and its form for temporary permits for factory additions asks for the building owner's consent letter when a tenant applies. Majlis Perbandaran Hulu Selangor covers Serendah, Bukit Beruntung and Batang Kali (MPHS), and its minor works checklist states that work may not start before approval and that failing to comply can cost ten times the processing fee. Works in Shah Alam go to MBSA. Unapproved work shrinks the pool of buyers, as my illegal extension guide explains.
  • Keep the receipts. For RPGT, HASiL deducts spending that enhances or preserves the value of the asset, as reflected at the time of disposal, and gives enlarging a warehouse for a business as an example. Even when work does not lift the price, it can lower the tax on the gain.

What I suggest before a sale is short: fix leaks, gutters, roller shutters and cracked floor slabs, clear the compound, and put the approvals in one file. My guide on factories that are not selling sets out the full order.

Does more power raise a factory's price?

Registered data does not record a factory's power supply, so no registered figure shows what extra power adds. What I see in practice is that power decides who can buy: a buyer with a heavy machine list rules out a unit that cannot carry it.

Before you upgrade only to sell, know what an upgrade involves under TNB's own documents:

  • A larger supply can need a substation on your land. TNB's Electricity Supply Application Handbook sets the minimum scheme by maximum demand: above 350 kVA up to 1,000 kVA at 400V is a direct underground cable from a new substation, and the substation land is transferred or leased to TNB at a nominal RM10. That land is no longer the buyer's to use; my compact substation guide covers the layout.
  • You pay the difference. TNB's Connection Charges Book 2025 says a consumer applying for additional supply pays the difference between the new and the existing load charge; at medium voltage the load charge is RM45 per kW of declared maximum demand.
  • A medium voltage upgrade carries a commitment. For medium and high voltage consumers, TNB applies a Connected Load Charge for 5 years after an additional supply is connected: RM8.50 for every kW by which the recorded maximum demand falls short of the reference level. When a new consumer takes over an existing premises through a change of tenancy, the remaining period of the previous consumer applies. A buyer or new tenant who uses less power than you declared inherits that risk, so disclose it.

My order for a seller: put the latest TNB bills and the rating of the incoming supply in the sale file, ask an electrical consultant what TNB could supply at the site, and let the buyer decide whether to apply. My kVA to amps guide shows how buyers size what they need.

Does solar on the roof make a factory easier to sell?

It can, for a buyer who uses a lot of power, but only if the papers move with the factory. New rooftop systems that export surplus to the grid have gone through Solar ATAP since 1 January 2026; SEDA describes it as the continuation of the NEM programme that ended in June 2025. The Energy Commission's Solar ATAP guidelines (GP/ST/No. 60/2025) set these rules:

  • a non-domestic system can be up to 100% of the consumer's maximum demand, capped at 1,000 kW
  • surplus energy earns bill credits at the Average SMP, and credits not used in the billing period are forfeited
  • operation under the programme lasts not more than ten years from the commencement date, after which the system runs for self-consumption only
  • when the premises are sold, the new owner may apply to SEDA to continue for the remaining period, and the programme continues only once the new owner signs a new Solar ATAP contract with TNB

Who owns the panels matters more than how many there are. SEDA describes three routes: an outright purchase, where the site owner owns the system; a power purchase agreement, where the solar investor owns it; and solar leasing, where the site owner owns it after the lease period. Under SARE, payment is collected through the TNB bill with a 2 sen/kWh service fee, and non-payment can lead TNB to disconnect the supply. If an investor owns the system, it is not yours to sell, and the SPA has to deal with that agreement on its own terms.

The National Land Code defines land to include things permanently fastened to anything attached to the earth, so panels you own outright usually go with the building unless the SPA says otherwise; ask your lawyer to write it in either way. If your tenant installed the system on its own account, note that the guidelines define a consumer as an owner or occupier, so the contract may be the tenant's, and the tenancy decides what happens at the end.

The solar file I ask for: the SEDA certificate, the TNB Solar ATAP contract with its commencement date (to show the years left), the civil and structural drawing endorsed for the installation, warranties and maintenance records.

Green building ratings are a separate question from solar; FactoryHub explains GBI, GreenRE and LEED for factories.

What do I prepare before marketing either way?

Document Vacant sale Tenanted sale
Official title search, showing any lease, endorsement or charge Yes Yes
CCC or CF covering every extension Yes Yes
Latest TNB bills and the supply rating Yes Yes, noting whose name the account is in
Stamped tenancy, renewal letters, deposit receipts, rent record Not needed Yes
Tenant's signed move-out date or surrender Yes, if a tenant is still inside Not needed
Bank's written consent to the tenancy, if the title is charged Not needed Yes
Solar papers and who owns the system If installed If installed

The listing then states plainly which sale it is: with vacant possession on a stated date, or subject to a tenancy with its expiry month and rent. To see the units a buyer will compare yours with, look at factories for sale in Rawang and in Shah Alam; for the steps after the SPA is signed, see my guide on how long a factory sale takes.

If you are deciding whether to sell your factory in Rawang, Serendah, Kundang or Shah Alam vacant or with its tenant, WhatsApp Jason Low, Probationary Estate Agent PEA 1478 with CID Realtors, on +60 12-288 1834.

Questions people ask

01Should I sell my factory vacant or with the tenant?+

It depends on who is likely to buy. A manufacturer or logistics firm that will move in needs vacant possession on a fixed date, while an investor wants the rent, a reliable tenant and enough term left. If the tenancy ends soon and the move-out date is in writing, you can market the factory to both groups.

02Is a tenanted factory worth more than a vacant one?+

Not automatically. Valuers set rental income by reference to rents of similar properties and must say whether the rent is sustainable, so a rent far above JPPH-registered rents is not counted in full. A fair rent paid on time supports the price for an investor, while a low rent locked in for years usually weakens it.

03My factory has three years of tenancy left. Can I sell it to an investor?+

Yes. Sell it subject to the tenancy and hand the deposits over at completion, because section 216 of the National Land Code makes the tenancy terms, including the deposit refund, enforceable against the buyer. Prepare the stamped agreement, renewal letters, deposit receipts, rent records and, if the title is charged, the bank's written consent to the tenancy before you list.

04Will renovating my factory raise the selling price?+

Repairs that fix defects a buyer would price in, such as roof leaks, broken roller shutters and cracked floors, help a sale. A fit-out built around your own process rarely adds the same amount to the price, because buyers usually fit out for their own machines. Building work needs council approval, and enhancement costs can be deducted when RPGT is worked out, so keep the receipts.

05Does upgrading the TNB power supply raise a factory's value?+

Registered transaction data does not record power supply, so there is no registered figure for a premium. A bigger supply widens the pool of buyers, but an upgrade can need a substation on your land and, at medium or high voltage, carries TNB's Connected Load Charge for 5 years after the additional supply is connected. Document the existing supply and let the buyer decide.

06Does solar on the roof make it easier to sell a factory?+

It helps a buyer who uses a lot of power, if the papers transfer. Under Solar ATAP the new owner of a sold premises may apply to SEDA to continue for the rest of the ten-year operating period, after signing a new contract with TNB. If a solar investor owns the system under a power purchase agreement, the SPA has to deal with that agreement.

Sources

  1. FactoryHub: Rawang and Kundang JPPH-registered industrial transaction prices and rents
  2. FactoryHub: Serendah JPPH-registered industrial transaction prices and rents
  3. FactoryHub: Shah Alam JPPH-registered industrial transaction prices and rents
  4. National Land Code (Revised 2020), Act 828: sections 5 (land), 213, 215, 216, 221, 223, 224, 226, 228 and 316 (FAOLEX copy)
  5. Laws of Malaysia: Specific Relief Act 1950 (Act 137), section 7(2) (AGC reprint)
  6. LPPEH: Malaysian Valuation Standards, approaches and methods of valuation (exposure draft), investment method requirements
  7. HASiL: Adjudication of instruments (an instrument not properly stamped cannot be used as evidence)
  8. HASiL: Real Property Gains Tax (RPGT) rates
  9. HASiL: Disposal price and acquisition price (enhancement expenditure)
  10. Laws of Malaysia: Street, Drainage and Building Act 1974 (Act 133), section 70(1) (AGC reprint)
  11. Majlis Perbandaran Selayang: Kawasan pentadbiran (Mukim Rawang)
  12. Majlis Perbandaran Selayang: Borang JB-B04(A), permit sementara bagi tambahan bangunan kilang / industri (kemaskini 05.03.2026)
  13. Majlis Perbandaran Hulu Selangor: Latar belakang (Serendah, Bukit Beruntung, Batang Kali)
  14. Majlis Perbandaran Hulu Selangor: Senarai semak permohonan permit kerja kecil bangunan selain kediaman
  15. TNB: Electricity Supply Application Handbook (ESAH) 3.1, supply schemes and substation land
  16. TNB: Connection Charges Book 2025 (load charge, Connected Load Charge, change of tenancy)
  17. Suruhanjaya Tenaga: Guidelines for Solar Accelerated Transition Action Programme in Peninsular Malaysia (GP/ST/No. 60/2025)
  18. SEDA Malaysia: Solar ATAP (modes of purchase, PPA, leasing, SARE)

Units on the market nearby

More on selling or letting your factory

All guides: Selling or letting your factory →

Probationary Estate Agent · PEA 1478 · CID Realtors Sdn Bhd E(1) 1855About Jason → · Contact →
Ask Jason about this