Is the Factory Asking Price Fair? Price per Square Foot, JPPH Deals and How Much to Negotiate in Rawang, Serendah and Shah Alam
Compare the asking price with JPPH-registered deals for the same type in the same park, per sq ft of land, then adjust for land size, frontage, power, age, tenure and CCC. Registered semi-detached medians were RM380 psf of land in Rawang and Kundang, RM213 in Serendah and RM514 in Shah Alam. Negotiate on evidence, not a standard discount.
Key Takeaways
- Judge a factory price against JPPH-registered deals for the same factory type in the same park, not against other asking prices. In the registered data, every sale price per sq ft is per sq ft of land.
- In the 24 months to August 2026, semi-detached factories registered a median RM380 psf of land in Rawang and Kundang, RM213 psf of land in Serendah and RM514 psf of land in Shah Alam.
- Inside one estate, the price moves with land size and shape, frontage and access, the power already supplied, building age, the years left on a lease and whether the building has a CCC.
- There is no standard discount. Listed companies buying in Rawang, Serendah and Shah Alam paid at or close to an independent valuer's market value, so your room to negotiate comes from evidence and from defects you can put a cost on.
- A price well below the park's typical range is a reason to check the title, the approvals and the lease before you call it undervalued.
How do I judge whether a factory's asking price is reasonable?
When a buyer sends me a unit and asks whether the price is fair, I work through the same five steps every time.
- Pin down the type and the park. A terrace, a semi-detached and a detached factory are three different markets, and two parks five minutes apart can be priced very differently. I go by the lot number on the title, not the address in the advert.
- Pull the registered deals. FactoryHub compiles JPPH-registered industrial transfers by area and by park, for example for Rawang and Kundang, Serendah and Shah Alam. JPPH's own NAPIC portal publishes Open Sales Data covering residential, commercial and industrial transactions, and its data visualisation page breaks industrial transactions down by state, district, type and price range.
- Turn the asking price into RM per sq ft of land. Divide the price by the land area on the title. That puts it on the same basis as the registered figures.
- Place it inside the typical range. The typical range is the 25th to 75th percentile of registered prices. A price inside it needs no special explanation. A price above the top of the range needs a reason you can see on site or on paper.
- Adjust for this unit. Land size, frontage, power, age, tenure and approvals, each covered below.
These are the JPPH-registered figures for the 24 months to August 2026, as compiled by FactoryHub. Every psf is per sq ft of land.
| Area | Type | Deals | Median price | Typical range | Median psf of land | Median land |
|---|---|---|---|---|---|---|
| Rawang and Kundang | Terrace factory | 38 | RM670,000 | RM600,000 to RM938,000 | RM328 | 2,384 sq ft |
| Rawang and Kundang | Semi-detached factory | 129 | RM4.3 million | RM3.71 million to RM6.2 million | RM380 | 12,561 sq ft |
| Rawang and Kundang | Detached factory | 16 | RM6.92 million | RM5.49 million to RM15.15 million | RM237 | 26,215 sq ft |
| Serendah | Terrace factory | 256 | RM245,000 | RM180,000 to RM339,000 | RM114 | 2,002 sq ft |
| Serendah | Semi-detached factory | 28 | RM3.16 million | RM695,000 to RM3.8 million | RM213 | 10,506 sq ft |
| Serendah | Detached factory | 8 | RM8.65 million | RM5.89 million to RM17.75 million | RM166 | 49,744 sq ft |
| Shah Alam | Terrace factory | 70 | RM1.13 million | RM840,000 to RM1.79 million | RM484 | 2,002 sq ft |
| Shah Alam | Semi-detached factory | 66 | RM5.92 million | RM4.62 million to RM7.14 million | RM514 | 10,779 sq ft |
| Shah Alam | Detached factory | 20 | RM16 million | RM13.61 million to RM36.2 million | RM335 | 67,901 sq ft |
Two cautions. These are the registered records available so far, not every factory sold. And the latest two quarters are provisional, because transfers reach JPPH weeks to months after signing. A park median is only published from 5 deals, so for a small estate you may have to work from the area figure and say so.
For a large purchase I also suggest a report from a registered valuer. The Malaysian Valuation Standards define market value as "the estimated amount for which an asset or liability should exchange on the valuation date between a willing buyer and a willing seller in an arm's-length transaction after proper marketing where the parties had each acted knowledgeably, prudently and without compulsion" (MVS 4, published by LPEPH). That definition is really the question you are asking when you ask whether a price is fair. If you want to see how the figures have moved since 2021, my guide on registered price trends covers it.
If you need a formal valuation rather than a price check, FactoryHub's factory valuation guide explains how industrial property is valued.
Should I compare price per square foot of land or of built-up area?
Compare land psf first, because that is what the registered data holds. FactoryHub's pages explain that the built-up area in the registered records is often missing or inconsistent, so every sale psf there is the price divided by the land area. Built-up psf is still useful, but only once you have the gross floor area from the approved plans.
Two public deals show how far apart the two numbers can be:
- Serendah Technology Park, 2025. Prestar Resources agreed to buy a freehold semi-detached light industrial factory, then still under development, for RM17 million. The property has about 72,356 sq ft of land plus an additional 23,357 sq ft, and a gross floor area of about 33,350 sq ft (The Edge, 17 December 2025). On my arithmetic that is roughly RM178 per sq ft of land, or roughly RM510 per sq ft of floor area.
- Seksyen 15, Shah Alam, 2026. A Mycron Steel subsidiary agreed to buy a detached factory about 41 years old on 232,178 sq ft of leasehold land for RM30.0 million. The buildings on it total 140,403 sq ft (Mycron Steel circular to shareholders). That is roughly RM129 per sq ft of land, or roughly RM214 per sq ft of floor area.
So when a seller says "only RM200 psf", it may be floor area, and a buyer who compares that with a registered RM335 psf of land is comparing two different things. I always ask which area a psf refers to. A terrace factory covers most of its lot and a detached factory much less of it, which is why I compare psf only within one type, as explained in my terrace, semi-D and detached factory comparison.
Why do prices differ so much inside one estate?
The registered data shows the spread before you visit a single unit. Around Serendah, terrace factories in Bukit Beruntung registered a median RM270,000 at RM134 psf of land, Bukit Sentosa RM195,000 at RM90 psf of land, and Gabung Sentosa Industrial Park RM775,000 at RM386 psf of land. In Shah Alam, semi-detached factories in Temasya Industrial Park registered a median RM6.85 million at RM669 psf of land, while Seksyen 16 registered RM3.47 million at RM177 psf of land.
Inside one park, a valuer explains the gap line by line. In the Seksyen 15 valuation published with the Mycron circular, the valuer compared four industrial land sales and adjusted them for location and accessibility (up to 10%), tenure (10%), land shape (5%), terrain efficiency (5%), land area (5%) and time since the sale (5%), then adopted RM130 per sq ft for the land. The building was valued at replacement cost less 75% depreciation for its age and condition, so land made up 89.1% of the RM30.5 million market value. These are the factors I check on every site visit.
Land size and shape
Big lots register lower prices per sq ft of land. In Shah Alam, factories on 10,000 to 30,000 sq ft of land registered a median RM413 psf of land, and those on 60,000 sq ft and above RM224. In Rawang, Mynews agreed to buy 13.5 acres of vacant leasehold industrial land for RM24.7 million (Malay Mail, 22 July 2026), which works out on my arithmetic to about RM42 per sq ft, below the RM57 psf of land median for industrial land in Rawang and Kundang. An irregular shape or uneven terrain also costs usable area, which is why the valuer above deducted for both.
Frontage and access
Frontage, a corner position and how easily a 40-footer can turn in all sit under "location and accessibility", one of the two 10% adjustments in the Mycron comparables. On site I drive the truck route from the main road to the loading bay before I accept that two units in one park are worth the same.
Power already supplied
A unit that already has the supply you need saves you money and months. Under TNB's connection charges, a customer upgrading pays the difference between the new and the existing load charge; a low voltage supply metered through a 1000/5 current transformer for 481 to 600 kW carries a RM27,000 load charge, medium voltage is charged at RM45 per kW of declared maximum demand, and above 60 kW the customer must provide land for a substation. Wiring, switchgear and the substation building come on top. My kVA to amps and TNB upgrade guide explains how to size what you need.
Building age and condition
The Mycron valuer took construction costs for industrial premises of RM141.68 to RM237.37 per sq ft from a 2025 cost handbook, adopted lower rates for an open-sided building, and then depreciated it by 75%. An older roof, cladding or floor slab does not cancel the land value, but it does come off the building value.
Tenure and years left
The registered data gives no simple freehold premium. In Rawang and Kundang, freehold factories registered a median RM4.1 million (165 deals) against RM3.51 million for leasehold (24 deals); in Shah Alam it runs the other way, RM3.36 million freehold (136 deals) against RM5.92 million leasehold (22 deals). The gap mixes location, size and type, not tenure alone. What matters for one unit is the expiry date on the title; the Mynews land, for example, has a lease running to 4 January 2095. My freehold vs leasehold guide covers what changes for the buyer.
CCC, approvals and title conditions
Under by-law 25 of the Selangor Uniform Building By-Laws, a certificate of completion and compliance (Form F) is issued by the principal submitting person once the council's technical conditions, the stage certificates G1 to G21 and the essential services are in place, and a copy goes to the local authority within fourteen days. Extensions built without approval are not covered by it; see my guide on illegal factory extensions. The title also matters: the Seksyen 15 title carries the express condition "Perusahaan Berat" and a restriction that it cannot be transferred, leased or charged without state consent. A Bumiputera lot is priced for a smaller pool of buyers; see my Bumi lot guide.
How much room is there to negotiate on a factory price?
No public body publishes a typical discount for factories, and I do not quote one. What the public record in my areas shows is how close serious buyers price to a valuation:
- In Seksyen 15, Shah Alam, the RM30.0 million price was set on a willing-buyer willing-seller basis against an independent market value of RM30.5 million, about 1.6% below it. The independent adviser called it fair because it approximates the market value. This was a related-party deal.
- In Serendah Technology Park, Prestar's RM17 million indicative price was based on the market value set by an independent valuer using the comparison method. The seller was linked to Prestar's group managing director.
- In Rawang, Mynews set its RM24.7 million price "after taking into account publicly available transaction data and indicative asking prices of comparable industrial land in the surrounding area" (Malay Mail).
So the negotiation is about evidence. This is where I look for room:
- The gap to the registered range. An asking price above the 75th percentile for the same type and a similar land size, with nothing on site to justify it.
- Defects with a cost. Written quotes for a power upgrade, regularising an extension or repairing a roof are numbers a seller can check, and they come off the price more easily than an opinion does.
- Terms rather than price. The completion period, vacant possession, which fixtures stay, and how the seller's loan is redeemed can be worth as much as a lower figure.
- What a lower price does not change. Stamp duty on the transfer is charged on the consideration or the market value, whichever is higher (LHDN stamp duty guideline), so a cheap price between friendly parties does not cut the duty; my stamp duty guide has the rates. Your bank will also have the factory valued for financing, a valuation type the standards cover under MVS 12, so ask your banker how a price above its valuation is treated before you sign.
How can I tell if a factory is undervalued?
A factory is cheap when its price sits below its park's typical range for the same type and a similar land size, and the reason is not on the title, in the approvals or in the building. When I find a low price, it usually traces back to one of these:
- A short lease, or a restriction in interest that needs state consent, or Bumiputera status.
- A charge or caveat on the title. I order an official search (carian rasmi) through the e-Tanah Selangor portal; the fee is shown before you pay by FPX.
- No CCC, or an extension without approval.
- A title condition that does not fit your use, for example a light industry condition when your process is heavier.
- Less power than you need, which means a TNB application and possibly substation land.
- An old building whose roof or structure needs work soon.
The Seksyen 15 factory is a good example of a low psf that is not a bargain. Shah Alam detached factories registered a median RM335 psf of land, and this one was valued at about RM130 per sq ft for its land, because the lot is very large, the lease runs to 11 May 2085 and the open-sided building is about 41 years old. If none of the reasons above applies, the seller may simply want a quick sale. Before you rely on it, ask a registered valuer, whom you can check on the LPEPH register.
What do I ask the seller for before I call a price fair?
- A copy of the title and a fresh official search.
- The land area from the title and the gross floor area from the approved plans.
- The CCC, or the certificate of fitness for an older building, and the approved plans for any extension.
- A recent TNB bill showing the supply and maximum demand.
- Quit rent and assessment receipts for the current year.
- The tenancy agreement, if the factory is let.
- A list of what stays: cranes, compact substation, racking, office fit-out.
With those in hand, the registered figures, the unit's own facts and, for a large purchase, a valuer's report usually settle the question. Units I currently handle are on my Shah Alam factory for sale and Rawang factory for sale pages.
Jason Low, Probationary Estate Agent PEA 1478 with CID Realtors Sdn Bhd. To check a factory's asking price against what its own park has registered, WhatsApp Jason Low on +60 12-288 1834.
How a factory's market value is worked out
How is a factory price calculated when buying a factory in Rawang or Shah Alam?
Divide the asking price by the land area on the title to get RM per sq ft of land, then set that against JPPH-registered deals for the same factory type in the same park. For semi-detached factories, the registered median was RM380 psf of land in Rawang and Kundang and RM514 in Shah Alam. From there, adjust for this unit's land size, frontage, power, age, tenure and CCC.
How do I calculate the market value of a factory in northern Selangor or Shah Alam?
Compare the unit with JPPH-registered deals for the same factory type in the same park, put them all on RM per sq ft of land, then adjust for land size, frontage, power, age, tenure and CCC. The Malaysian Valuation Standards define market value as the estimated amount a willing buyer and a willing seller would exchange in an arm's-length transaction. For a large purchase, appoint a registered valuer listed on the LPEPH register.
Questions people ask
01How do I know if a factory price is reasonable?+
Compare it with JPPH-registered deals for the same factory type in the same park, converted to RM per sq ft of land. If the asking price sits inside the typical range, the 25th to 75th percentile, it needs no special explanation; above it, the seller should show what the unit has that others lack. For a large purchase, a registered valuer's market value is the firmest check.
02Why do factories in the same industrial park sell at such different prices?+
Land size and shape, frontage, the power supply, building age, the years left on the lease and the approvals differ from unit to unit. In a Seksyen 15, Shah Alam valuation published in 2026, the valuer adjusted comparable sales for location, tenure, land shape, terrain, land area and time, and depreciated a building about 41 years old by 75%. Larger lots also register lower prices per sq ft of land.
03How much can I negotiate off a factory asking price in Malaysia?+
There is no published standard discount, so be wary of anyone quoting one. Listed buyers in Rawang, Serendah and Shah Alam paid at or close to an independent valuation, for example RM30.0 million against a RM30.5 million market value in Seksyen 15. Your room comes from the gap between the asking price and the registered range, and from defects you can cost with written quotes.
04How can I tell if a factory is undervalued?+
It sits below its park's typical range for the same type and land size, and the title, approvals and building give no reason for it. Check the lease years left, title restrictions and encumbrances by official search, the CCC, the power supply and any extensions first. If all are clean, confirm with a registered valuer before you rely on the bargain.
05Is factory price per square foot based on land or built-up area?+
JPPH-registered sale figures are per sq ft of land, because the built-up area in the records is often missing or inconsistent. Sellers sometimes quote psf of floor area, which can be far higher for the same deal: a 2025 Serendah Technology Park purchase works out to about RM178 per sq ft of land but about RM510 per sq ft of floor area. Always ask which area a psf refers to.
06Does buying below market value reduce stamp duty?+
No. LHDN charges stamp duty on a property transfer on the consideration or the market value, whichever is higher. A low price agreed between friendly parties therefore does not lower the duty on the transfer.
07What is the price per square foot for factories in Shah Alam?+
Shah Alam factories registered median prices of RM484 per sq ft of land for terrace factories, RM514 for semi-detached factories and RM335 for detached factories, based on JPPH-registered deals in the 24 months to August 2026. These figures are per sq ft of land, not built-up area. Within one park the number shifts with land size, frontage, power supply, building age and tenure, so compare only within the same type and park, and check the land area on the title with the land office.
08How much is my factory worth now in Rawang or Shah Alam?+
Your factory's value is set by what JPPH-registered deals show for the same type in the same park, converted to RM per sq ft of land and then adjusted for your own land size, frontage, power, age, tenure and CCC. As a reference point, semi-detached factories registered a median RM514 psf of land in Shah Alam and RM380 in Rawang and Kundang. For a firm figure, appoint a registered valuer listed on the LPEPH register.
Sources
- FactoryHub: Rawang and Kundang JPPH-registered industrial transactions, 24 months to August 2026
- FactoryHub: Serendah JPPH-registered industrial transactions, 24 months to August 2026
- FactoryHub: Shah Alam JPPH-registered industrial transactions, 24 months to August 2026
- NAPIC (JPPH): Open Sales Data, residential, commercial and industrial property transaction data
- NAPIC (JPPH): Visualisasi Data, industrial transactions by state, district, type and price range
- LPEPH (BOVAEP): Malaysian Valuation Standards, sixth edition, MVS 4 market value and MVS 12 valuations for financing
- LHDN: Garis Panduan Pengenaan Duti Setem, transfer of real property charged on consideration or market value, whichever is higher
- e-Tanah Selangor: Permohonan Carian Rasmi (official land search) user guide
- Selangor Uniform Building By-Laws 1986 (updated), by-law 25 certificate of completion and compliance
- TNB: Connection Charges Book 2025, load charges, supply upgrades and substation land
- Mycron Steel Berhad: circular on the proposed acquisition of Lot 10, Persiaran Selangor, Seksyen 15, Shah Alam, with valuation certificate (2026)
- The Edge: Prestar Resources to acquire RM17m industrial property in Serendah Technology Park (17 December 2025)
- Malay Mail: Mynews buys Rawang industrial land for RM24.7m (22 July 2026)
- The Edge: MyNews acquires 13.5-acre plot in Rawang, remaining lease 69 years (22 July 2026)
Units on the market nearby
Semi-D Factory for Rent in Saujana Teknologi Rawang, Rawang, 6,525 sq ft
RM 10,500/month
Semi-Detached Factory for Sale or Rent in Saujana Rawang, Rawang, 8,000 sq ft
RM 4,000,000 · RM 15,000/month
Detached Factory for Rent in Batu 17 Rawang, 9,000 sq ft
RM 21,000/month
More on buying a factory or industrial land
- Stamp Duty Malaysia 2026 for a Factory or Industrial Land: How It Is Calculated, With Rawang, Serendah and Shah Alam Examples
- Quit Rent in Selangor for a Factory or Industrial Land: How Much It Costs and What Buyers in Rawang, Serendah and Shah Alam Should Check
- Freehold vs Leasehold Factory in Shah Alam and Rawang: What Changes for the Buyer
- Building a Factory in Rawang or Serendah: Contractor's All Risk, Build-to-Suit and When Fire Insurance Starts