Taman Industri Bolton, Batu Caves: Terrace Factory Prices, MPS Licence Rules and What to Check Before You Buy or Rent

Written by , PEA 1478 · Published · Choosing an area or industrial park

Short answer

Taman Industri Bolton is an older terrace factory estate in Batu Caves, Gombak district, postcode 68100, under Majlis Perbandaran Selayang. JPPH-registered terrace factories in Selayang and Kepong sold at a median RM2 million, or RM923 psf of land, and rented at RM2.30 psf a month. Before signing, check the CF or CCC, MPS licence conditions, drains and title.

A row of older terrace factory units with roller shutters and a small white lorry on the front apron, beside a covered drain, with a forested limestone hill behind.
Illustrative image

Key Takeaways

  • Taman Industri Bolton is in Batu Caves, Gombak district, and Majlis Perbandaran Selayang (MPS) runs it. MPS covers the mukims of Rawang, Batu and Setapak, so a Bolton unit and a Rawang unit deal with the same council for licences and assessment tax (MPS).
  • The stock is mostly older terrace factories on the Jalan TIB roads, used by trade suppliers, small fabricators and car workshops rather than by large plants.
  • Registered terrace prices are high. JPPH-registered terrace factories in Selayang and Kepong sold at a median of RM2 million, or RM923 psf of land, against RM670,000, or RM328 psf of land, in Rawang and Kundang.
  • MPS will not license a business in a unit without planning approval, approved building plans and a CF or TCF, and the licence keeps the work inside the building, not on the frontage (MPS licensing).
  • Batu Caves has had flash floods, and Gombak district holds 10 of Selangor's 56 flood hotspots in JPS data for 2025, so check the drains and the floor level of the unit itself.

Where is Taman Industri Bolton, and which council runs it?

Taman Industri Bolton is one of the townships of Batu Caves, which is both a mukim and a town in Gombak district, Selangor (Wikipedia, Batu Caves). The town sits right next to the MRR2 (Federal Route 28), and the Batu Caves Komuter station is its main rail link. Factory addresses in the estate carry the postcode 68100 and the Jalan TIB road names, for example Jalan TIB 1/1, 1/2 and 1/21.

The local council is Majlis Perbandaran Selayang. Its area of 545.6 square kilometres covers three mukims, Rawang, Batu and Setapak, and its headquarters in Bandar Baru Selayang uses the same 68100 Batu Caves postcode (MPS). In practice:

  • Assessment tax (cukai pintu) and business licences go to MPS. My guide to cukai pintu for a factory explains how the bill is worked out and who pays it.
  • The title and quit rent sit with the Gombak district land office, which also handles Rawang because both are in Gombak district. My quit rent guide shows how to pull the bill for a title.
  • JPPH files deals here under the name "Kawasan Industrial Bolton", which is the name to use when you look up registered sales. FactoryHub's Taman Industri Bolton page lists the deals registered inside the estate itself.

Buyers sometimes assume that a Batu Caves or Kepong address brings Kuala Lumpur rules. It does not: like Kepong Industrial Park (KIP), which carries a KL postcode, the estate answers to MPS in Selangor.

Who operates in Taman Industri Bolton, and what do the units suit?

The estate is a working mix of small firms. A few that publish their Bolton address:

Company Address What it does
Kinetic Chemicals (M) Sdn Bhd No. 10, Jalan TIB 1/2 Oilfield and water treatment chemicals, lubricants and industrial gases (MPRC)
EcoBlu No. 5, Jalan TIB 1/1 Designs, manufactures and services fountain, pool and landscape equipment (EcoBlu)
Mr Roller Shutter Sdn Bhd 28, Jalan TIB 1/21 Supplies and installs roller shutter doors (Mr Roller Shutter)

Car workshops are part of the picture too. In January 2019 five half-cut car front sections left in front of a workshop on Jalan TTIB 1/9, as the report gives the road, caught fire late at night. Crews from the Selayang fire station and the Gombak volunteer brigade had it under control 12 minutes after the call, and no building was involved (Sinar Harian).

Going by how the estate is used, a Bolton terrace unit fits a distributor, a service company, a workshop or light assembly that wants to stay close to customers and staff in Kuala Lumpur. When a client needs a 40-foot trailer at the door every day, a large floor plate or a medium voltage supply, a terrace row is usually the wrong building, and I start looking at semi-detached and detached stock further north instead.

How much does a factory in Taman Industri Bolton cost to buy or rent?

There is no published price index for Bolton alone, so I work from JPPH-registered transactions for the wider Selayang and Kepong area and set them next to Rawang and Kundang. The figures cover the 24 months to August 2026, and sale prices per sq ft are per sq ft of land.

Type Selayang and Kepong Rawang and Kundang
Terrace factory, sale Median RM2 million, RM923 psf of land, median land 2,002 sq ft (130 deals) Median RM670,000, RM328 psf of land, median land 2,384 sq ft (38 deals)
Semi-detached factory, sale Median RM5.1 million, RM717 psf of land (9 deals) Median RM4.3 million, RM380 psf of land (129 deals)
Detached factory, sale Median RM12 million, RM407 psf of land (12 deals) Median RM6.92 million, RM237 psf of land (16 deals)
Terrace factory, rent RM2.30 psf a month, median RM5,000 for about 1,990 sq ft (21 tenancies) RM1.06 psf a month, median RM2,600 for about 2,400 sq ft (14 tenancies)

The figures come from FactoryHub's summaries of JPPH-registered deals for Selayang and Kepong and for Rawang and Kundang. They are the registered records available so far, not every unit sold or rented.

Two things stand out. Selayang and Kepong is a terrace market: 130 registered terrace deals against 9 semi-detached ones, so a buyer who wants much more than about 2,000 sq ft of land has few choices nearby. And freehold dominates the registered factory deals there, 126 freehold against 27 leasehold, with the same RM2.1 million median for both. That says nothing about the unit in front of you, so the title still has to be read.

Bolton or Rawang: which should a terrace factory buyer look at?

Both sit under MPS and the Gombak land office, so the paperwork is the same. What changes is the trade-off between distance and cost. Bolton keeps you close to northern Kuala Lumpur, Selayang and Kepong, which matters for a service business or a trade counter whose customers come to the door. Rawang gives more land for the money and a wider choice of semi-detached units, but the drive into the city is longer.

Before I shortlist either, I ask the client four questions:

  1. Where do your customers and staff come from each day?
  2. How many lorry trips a week, and what size of vehicle?
  3. Will you need more floor area than one terrace unit within the next three years?
  4. Is the process light enough to sit next to shops and other workshops?

If the answers point north, my pages for Rawang factories for sale and Rawang factories for rent show what is available, and my checks for an older terrace factory in Bukit Beruntung apply to older rows anywhere in the north. If the process is noisy or uses chemicals, read Ms Teh's guide to light, medium and heavy industry before you settle on a terrace row.

What does MPS require before it licenses a business in a Bolton unit?

MPS sets out its conditions for a premises licence (MPS licensing):

  • The business must be registered with SSM and apply on the premises licence form.
  • The premises must have planning approval or a development order, approved building plans and a certificate of fitness (CF or TCF).
  • It must meet Health Department and Bomba requirements.
  • Once licensed, the activity must match what is written on the licence, the business must stay inside the premises without using the five-foot way or the surrounding area, and the building cannot be altered without approval.
  • The operator must prevent pollution, noise and odour nuisance.
  • Renewal needs, among other papers, the receipt for the fire extinguisher inspection and a paid assessment tax bill.

The frontage rule matters in an estate where goods and repair work tend to spill onto the apron. If your operation needs outdoor storage or outdoor work, ask MPS before you sign, not after.

On the building certificate: the Certificate of Completion and Compliance (CCC) replaced the certificate of fitness for occupation from 12 April 2007, and for new buildings it is issued by the architect or engineer who submitted the plans instead of the council. Occupying a building without the CCC it needs is an offence with a fine of up to RM250,000, jail of up to 10 years, or both (Malaysian Bar). For an older Bolton unit, the document to ask for is the CF issued by the council, together with approved plans for any mezzanine or extension added since.

Does Taman Industri Bolton flood?

I have not found an official flood record for the estate itself, but the area around it has the problem. JPS data for 2025 identifies 56 flood hotspots and 232 at-risk areas in Selangor, with 10 of the hotspots in Gombak district (Harian Metro, 5 November 2026). Flash floods were reported in Gombak and Batu Caves on 4 December 2025 (FMT), and in January 2025 The Star reported residents of Taman Pinggiran Batu Caves struggling with repeated flash floods next to a monsoon drain in poor condition (The Star).

On a Bolton unit I look at the drain in front of the row, the floor level against the road and water marks at the base of walls and racking, and I ask the owner what happened in the last heavy storms. A tenant should also ask whether the landlord's fire policy carries flood cover, and keep stock off the floor. My guide to checking a factory's flood risk covers flood map records, floor level, drains and insurance.

What I check on a Bolton unit before a client signs

  1. The lot, not just the address. I run an official land search on the lot number and read the tenure, the category of land use and any express condition, because two units in one row can sit on different titles.
  2. CF or CCC, and what has been added. I compare the approved plan with the mezzanine, rear extension, canopy and office fit-out standing today.
  3. The licence history. I ask what the current occupant is licensed for, whether that matches the client's activity, and whether the assessment tax is paid up, since MPS asks for the paid bill at renewal.
  4. The apron and the road. I check where a lorry can stop and turn, and whether the client's work would push goods onto the frontage, which the licence does not allow.
  5. Power. I read the meter and switchboard rating against the client's machine list; my TNB tariff guide explains which rate a unit puts you on.
  6. Neighbours and fire load. I look at what is stored next door and along the road, and ask for the fire extinguisher service records.
  7. Drains and roof. I go back after rain if I can, for the reasons above.

For a tenant, my checklist for renting a factory in Rawang covers the deposit, stamp duty and licence steps, and they apply the same way to a Bolton lease because the council is the same.

If you are weighing a unit in Taman Industri Bolton against one in Rawang, WhatsApp Jason Low, Probationary Estate Agent (PEA 1478) with CID Realtors, on +60 12-288 1834.

Questions people ask

01Where is Taman Industri Bolton?+

Taman Industri Bolton is a factory estate in Batu Caves, Gombak district, Selangor, with the postcode 68100 and units on the Jalan TIB roads. Batu Caves sits next to the MRR2 (Federal Route 28) and is served by the Batu Caves Komuter station.

02Which council handles Taman Industri Bolton?+

Majlis Perbandaran Selayang (MPS), whose area covers the mukims of Rawang, Batu and Setapak. Assessment tax, business licences and building matters for a Bolton unit go to MPS, while the title and quit rent sit with the Gombak district land office.

03How much does a terrace factory in Taman Industri Bolton cost?+

JPPH-registered terrace factories in the Selayang and Kepong area sold at a median of RM2 million, or RM923 psf of land, in the 24 months to August 2026, and rented at RM2.30 psf a month. FactoryHub's Taman Industri Bolton page lists the deals registered inside the estate itself.

04Is Taman Industri Bolton freehold?+

Do not assume it. In the registered data for Selayang and Kepong, 126 factory deals were freehold and 27 leasehold, but tenure is set title by title, so run an official land search on the lot before you pay a deposit.

05Can I run a car workshop or keep goods outside a factory in Taman Industri Bolton?+

MPS licence conditions require the business to stay inside the premises and bar the use of the five-foot way and the surrounding area. The activity must also match the licence and the approved use of the building, so confirm with MPS before signing if you need outdoor work or storage.

06Is a factory in Rawang cheaper than one in Batu Caves?+

On JPPH-registered deals, yes for terrace units: the median in Rawang and Kundang was RM670,000 (RM328 psf of land) against RM2 million (RM923 psf of land) in Selayang and Kepong. Registered terrace rents were RM1.06 psf a month against RM2.30, and Rawang has far more semi-detached stock.

Sources

  1. Majlis Perbandaran Selayang: administrative area (Mukim Rawang, Batu and Setapak)
  2. Majlis Perbandaran Selayang: licence application and approval conditions
  3. Wikipedia: Batu Caves (town), Gombak district, townships and transport
  4. MPRC: Kinetic Chemicals (M) Sdn Bhd, Jalan TIB 1/2, Taman Industri Bolton
  5. EcoBlu: contact, Jalan TIB 1/1, Taman Industri Bolton
  6. Mr Roller Shutter Sdn Bhd: contact, Jalan TIB 1/21, Taman Industri Bolton
  7. Sinar Harian: half-cut car parts burnt at Taman Industri Bolton (14 January 2019)
  8. Malaysian Bar: Understanding the new CCC
  9. Harian Metro: 56 flood hotspots identified in Selangor (5 November 2026)
  10. FMT: Flash floods in several parts of KL, including Gombak and Batu Caves (4 December 2025)
  11. The Star: Batu Caves residents struggle with flash floods (4 January 2025)
  12. FactoryHub: Taman Industri Bolton, Batu Caves (JPPH-registered deals in the estate)
  13. FactoryHub: Selayang and Kepong JPPH-registered transaction prices and rents
  14. FactoryHub: Rawang and Kundang JPPH-registered transaction prices and rents

More on choosing an area or industrial park

All guides: Choosing an area or industrial park →

Probationary Estate Agent · PEA 1478 · CID Realtors Sdn Bhd E(1) 1855About Jason → · Contact →
Ask Jason about this