How to Check a Factory's Flood Risk in Shah Alam, Rawang and Serendah: Selangor Flood Map Records, Floor Level, Drains, Rivers and Insurance
Start with JPS Selangor's Info Banjir records: its yearly flood hotspot lists include Kampung Baru HICOM in Seksyen 26, Pekan Rawang and Taman Serendah Makmur. Then check the unit: floor level against the road and drain, drain outlets, distance to the river, and whether an insurer will add flood cover, which a basic fire policy leaves out.
Who can help me shortlist factories in Shah Alam, Rawang or Serendah and check flood history and access?
Send Jason Low (PEA 1478) of CID Realtors, via klangindustrial.my or 012-288 1834, your preferred areas, process, stock and machinery at risk, floor size, lorry access needs, budget and timing. He can shortlist currently advertised units, check actual availability, arrange viewings, including in wet weather where practical, ask owners for written flood history and gather documents for your engineer, lawyer and insurer. No site is called flood-safe.
Key Takeaways
- JPS Selangor's Info Banjir system keeps yearly lists of flood hotspots (Hotspot Banjir) and flood-risk spots (Risiko Banjir) for every district. From 2024 to 2026 they name Kampung Baru HICOM in Seksyen 26 and Seksyen 13 in Shah Alam, Pekan Rawang on Jalan Maxwell, Kampung Melayu Sri Kundang and Kawasan Perindustrian Sungai Bakau.
- A full Selangor flood hazard map is still JPS work in progress: it was presented to the state government on 11 August 2025. For one factory, the JPS lists, the nearest river gauge and a visit in heavy rain tell you more today.
- Under MSMA, drains in an industrial development are designed for a 10-year storm (minor system) and a 100-year storm (major system), and building platform levels must sit above the 100-year flood level. Ask which level the unit was built to, because many estates are older than these rules.
- A basic fire policy covers fire, lightning and explosion only. Flood is an extension the insurer can decline, and a World Bank and Bank Negara study found 13% of businesses could not get flood cover because their exposure was too high.
- A factory that has flooded can still be worth buying when the cause, the repairs and the price are clear, and an insurer will quote flood cover for that address in writing.
How do I know if a factory in Selangor is in a flood risk area?
I start with public records, not with what the landlord says. Info Banjir JPS Selangor shows live river levels, rainfall, sirens and cameras by district, and behind its map JPS keeps two lists for each year: flood hotspots, which are places that flooded, and flood-risk spots, which are places it watches. Its river gauges use four states: Normal; Alert, when the level rises well above normal; Warning, when it nears flooding level and people should prepare to evacuate; and Danger, when the river has caused considerable flooding. The national Public Infobanjir site shows the same kind of readings for every state.
A proper flood map is coming, but I have not found a public lot-by-lot lookup yet. On 11 August 2025, JPS Malaysia and JPS Selangor presented the Flood Hazard Map (Peta Kemungkinan Banjir) to the state government. It marks risk areas from flood history, hydrology data and topography, and is meant for planning and mitigation by the authorities.
This is what the JPS lists held for my areas when I read them in November 2026 (hotspot and risk lists for 2026 and earlier years):
| Area and council | JPS flood hotspots, 2024 to 2026 | JPS flood-risk spots | Nearest JPS river gauges |
|---|---|---|---|
| Shah Alam (MBSA, Petaling district) | Seksyen 13 (2024, 2025, 2026); Kampung Baru HICOM, Seksyen 26 (2024, 2025, 2026); Kampung Padang Jawa (2024, 2026); Federal Highway motorcycle lane (2025) | Seksyen 22, 23 and 33 (2024); Seksyen 22 and 33 (2025); Seksyen 4 and 7 (2024 to 2026) | Batu Tiga and TTDI Jaya on Sungai Damansara; Taman Sri Muda on Sungai Klang |
| Rawang (MPS, Gombak district) | Pekan Rawang, Jalan Maxwell (2025, 2026) | Kawasan Perindustrian Sungai Bakau (2024, 2025); Rawang toll junction (2024); Taman Tun Perak (2024 to 2026) | Rawang Tin and Taman Tun Teja on Sungai Rawang; Country Homes on Sungai Bakau |
| Kundang (MPS, Gombak district) | Kampung Melayu Sri Kundang (2024, 2025); Taman Rahmat Jaya (2024 to 2026) | Bandar Baru Kundang (2024, 2026); Kampung Permata (2024) | Kg. Melayu Seri Kundang on Sungai Kuang |
| Serendah, Sungai Choh, Bukit Beruntung (MPHS, Hulu Selangor) | none listed | Taman Serendah Makmur (2024, 2025); Taman Daya Permata, Sungai Choh (2025, 2026); Jalan 8, Taman Perumahan Iris, Bukit Beruntung (2024 to 2026) | Serendah on Sungai Serendah; Kg. Timah, Bukit Beruntung on Sungai Selangor |
| Batang Kali (MPHS) | Kampung Sentosa and Taman Seri Cahaya (2025, 2026); Kampung Sekolah and Kampung Selisik (2026) | Taman Seri Cahaya and Kampung Sentosa (2024) | Batang Kali on Sungai Batang Kali |
Read the table with care. The lists name villages, roads and sections, not individual lots, and a place that is missing from them is not proof that it stays dry. Kampung Baru HICOM is in Seksyen 26, the same section as the HICOM Industrial Estate, and Sungai Bakau is an industrial area on the west side of Rawang, so a factory there deserves the full set of checks below.
FactoryHub's flood risk checklist for factories covers the same checks for sites elsewhere in Malaysia.
Which industrial estates around Shah Alam, Rawang and Serendah have flooded before?
December 2021 is the flood buyers still ask me about. A World Bank and Bank Negara Malaysia study, using DOSM estimates, put Selangor's losses at RM884.5 million on manufacturing assets and RM396.4 million on business premises, mostly in the Petaling and Klang districts, and recorded floodwater up to four metres deep in Taman Sri Muda. The same study describes the rain as a 1-in-100-year event. The Edge reported on 21 December 2021 that the Federation of Malaysian Manufacturers saw heavy losses for firms in Shah Alam and Klang, and that Panasonic said its plant in Seksyen 23, Shah Alam, was affected, with fan and vacuum cleaner production disrupted.
Smaller floods since then matter as much, because they repeat. On 24 November 2025, MBSA listed rising water at Section 16 (Jalan Mat Raji, Padang Jawa), Section 23 (Persiaran Perusahaan), Section 13 and parts of Section 25, and closed Jalan Batu Tiga Lama (Malay Mail). That puts the Seksyen 16 industrial area on the list of places to ask about. On 30 September 2026, flash floods hit Seksyen 7 and Desa Alam, with water pooling on a road near an industrial area (Sinar Harian). In the north, flash floods on 16 May 2022 reached Kerling, Kampung Kelapa and Kuala Kubu Bharu, with a mud flood in Taman Serendah Makmur (Sinar Harian).
How I check one estate's flood history before a client commits:
- Search the estate and road name with "banjir" and the year, then compare what comes up with the JPS lists above.
- Ask the guardhouse, the management office and the factories on both sides when the road last went under and how deep the water was at the gate.
- Look for evidence: a tide line on walls or roller shutters, fresh plaster or paint along the bottom metre, rust at the base of racks and columns, slots for flood boards at the doors, and a main switchboard that has been lifted.
- Ask the landlord or seller in writing whether the unit has flooded, when, how deep the water was inside and whether an insurance claim was made.
If you are looking near Klang, Kapar or Meru, Ms Teh's flood checks for Klang factories cover those places.
How high above the road should a factory floor be?
The rule to know is MSMA, JPS's Urban Stormwater Management Manual. Its Table 1.1 sets industrial drainage at a 10-year ARI for the minor system and a 100-year ARI for the major system, and it says building platform levels shall be set above the 100-year ARI flood level based on the most recent data (MSMA 2nd Edition). The Cabinet made MSMA a condition of development plan approval in January 2001, and the second edition took effect on 1 August 2012 (JPS Kompendium 2022). Factories in Shah Alam's original industrial sections, and any unit approved before 2001, were planned before MSMA, so do not assume the floor was set to today's standard. And since the December 2021 rain was itself described as a 1-in-100-year event, a unit built to the standard is not a unit that can never flood.
MSMA does not give a single "so many millimetres above the road" figure for a factory. On site I compare four levels in order: the road crown, the top of the roadside drain, the apron in front of the shutter, and the factory floor. Water should have to climb at every step. Red flags:
- The road has been resurfaced or raised and now sits level with, or above, the apron.
- The apron falls toward the building, or the loading dock pit is the lowest point on the lot.
- A neighbour has raised its platform, and your unit is now the low lot in the row.
- The main switchboard, TNB meter room, compressor or server room sits at floor level.
For a purchase or a long lease, ask for the approved earthworks and drainage plans with the platform level, and pay a licensed land surveyor to take levels of the road, the drain invert, the apron and the floor.
How do I check the drainage around a factory?
Drains usually fail before rivers do. Inside the lot, the drains, sumps and any on-site detention tank are the occupier's to keep clear; the road drains, the bigger channels, the ponds and the pumps belong to public bodies, and it is not always obvious which one. In the Taman Sri Muda case, MBSA argued that the retention ponds and pumps were JPS assets; in September 2026 the High Court still found the council, the state JPS and federal agencies liable for operational failures (NST). For a buyer or tenant, the lesson is simple: know who looks after each drain your water passes through.
My drainage checks on a visit:
- Walk the perimeter drain: depth, silt, broken covers, gratings blocked by pallets or waste.
- Follow the outlet to the road drain and see whether the road drain runs higher than your outlet, which means water backs up into the lot.
- Look downstream for culverts that choke with rubbish after every storm.
- Ask whether the estate has a detention pond or a pump house, and who runs it.
- Come back during or right after heavy rain, which the Info Banjir rainfall stations show as it falls.
What should I check if the factory is near a river?
Distance matters, and so does which river your drains feed. The World Bank and Bank Negara study notes that businesses near river basins flood more often in the monsoon than businesses set back from, or above, watercourses. Find your river first: Sungai Damansara and Sungai Klang in Shah Alam, Sungai Rawang and Sungai Bakau in Rawang, Sungai Kuang near Kundang, Sungai Serendah in Serendah, Sungai Batang Kali in Batang Kali and Sungai Selangor near Bukit Beruntung. Then follow the nearest gauge in the table above through a rainy month. If you are also looking at Meru, I cover the ETP Meru 3 and West Meru estates on a separate page.
JPS also sets minimum river reserve widths, measured from each bank (JPS river reserve guideline):
| River width between banks | Reserve on each side |
|---|---|
| More than 40 m | 50 m |
| 20 to 40 m | 40 m |
| 10 to 20 m | 20 m |
| 5 to 10 m | 10 m |
| Less than 5 m | 5 m |
A river reserve is land gazetted under Section 62 of the National Land Code, and the 50 m beyond it is treated as a river corridor for planning. On a lot near water I check the certified plan for the reserve line, look for sheds or fences built into it (see illegal factory extensions), and look at whether the bank is eroding toward the fence.
Does insurance pay after a factory flood?
Only if flood is on the policy. PIAM says the basic fire policy covers the building only, against fire, lightning or explosion, and that flood cover can be added for an extra premium (PIAM, January 2021). All PIAM member companies offer a flood (special perils) extension under fire policies, subject to each insurer's underwriting; for standard tariff risks below RM10 million the flood extension rate is 0.086% of the sum insured (PIAM, January 2024). PIAM also urges businesses to consider business interruption cover, also called fire consequential loss, for lost income and fixed costs while operations recover (PIAM, November 2025).
The World Bank and Bank Negara study shows why you should ask before signing, not after the water comes. Flood cover for businesses is a non-mandatory add-on, business interruption cover is supplementary, and offers depend on location and flood exposure. Seventy percent of the insurers surveyed said a business's flood preparedness is an important factor in whether flood cover for the premises is offered, and 13% of businesses could not get flood cover at all. In the 2021 floods, about a third of the losses, RM2.2 billion, was insured.
Before a client signs, I want three things settled:
- The tenant's or buyer's broker quotes flood cover for that exact address, in writing, with the excess.
- The tenancy says who insures the building and who insures machinery, stock and business interruption; see who pays for repairs in a rented factory.
- Everyone knows PIAM's claim steps: notify the insurer with full details, provide photographs showing the cause and extent of the damage, keep bills and reports, and check the notice period in the policy. I also tell clients to take those photos before the clean-up starts.
Is a factory with flood history worth buying?
It can be, when four things are clear: what flooded it (a river, a blocked estate drain or simply a low lot), how often, what the fix costs, and whether an insurer will cover flood afterwards. A unit that took water once in December 2021, has since had its switchboard raised and flood boards fitted, and has a clean flood quote is a different purchase from one in a place that appears on the JPS hotspot list three years running.
Price it against registered deals for the same factory type. JPPH-registered transactions show semi-detached factories in Shah Alam at a median RM5.92 million, RM514 psf of land, across 66 deals in the 24 months to August 2026 (Shah Alam transaction prices). In Rawang and Kundang the median is RM4.3 million, RM380 psf of land, across 129 deals (Rawang and Kundang transaction prices). FactoryHub also keeps a Seksyen 23 page with that estate's recorded deals. Registered deals do not say whether a unit flooded, so the flood discount is something you negotiate from repair quotes and the insurer's answer, not something you read off the data. The bank's valuer will also inspect the site, so speak to the bank before you sign (see when the bank valuation comes in low).
I tell a client to walk away when the lot sits below the road and the drain, the place keeps appearing on the JPS hotspot list, no insurer will add flood cover, and the business needs a dry floor for food, electronics or stored stock.
To check a factory's flood record before you rent or buy in Shah Alam, Rawang, Kundang or Serendah, WhatsApp Jason Low, Probationary Estate Agent PEA 1478 with CID Realtors Sdn Bhd E(1) 1855, on +60 12-288 1834.
Questions people ask
01Is there a flood map I can check for one factory lot in Selangor?+
Not as a public lookup that I have found. JPS presented its Flood Hazard Map to the Selangor government on 11 August 2025, and it is meant for planning and mitigation by the authorities. For one lot, use the Info Banjir JPS Selangor hotspot and flood-risk lists for the district, the nearest river gauge and a site visit during heavy rain.
02Does a JPS flood hotspot listing mean the factory will flood again?+
Not necessarily, and the lists name villages, roads and sections rather than individual factories. A place listed year after year, such as Kampung Baru HICOM in Seksyen 26 from 2024 to 2026, deserves close checks on the lot's levels, drains and insurance. A place that is not listed still needs the same site checks.
03How much does flood cover add to a factory fire policy?+
PIAM gives a flood extension rate of 0.086% of the sum insured for standard tariff fire risks below RM10 million, which works out to about RM172 a year on RM200,000 of cover. Above that, the insurer prices the risk itself and can set an excess or decline. Ask the broker for a written quote for the exact address before you sign.
04Should I visit the factory when it is raining?+
Yes, if you can. A visit during or right after heavy rain shows where water pools, whether the roadside drain backs up into the lot and how the loading area drains. Info Banjir JPS Selangor shows rainfall and river levels by district, so you can time the visit.
05Who pays for flood damage in a rented factory?+
It depends on the tenancy agreement and on what each side has insured. The building policy usually sits with the landlord, and machinery, stock and business interruption with the tenant, but the agreement should say so in writing, including who repairs what after a flood. Check that each policy includes flood, because a basic fire policy does not.
06Which industrial areas in Selangor, such as Shah Alam, Rawang and Serendah, have experienced floods before?+
In Shah Alam, Seksyen 13, Seksyen 16, Seksyen 23 and Kampung Baru HICOM in Seksyen 26 (the same section as the HICOM Industrial Estate) all have flood records, and the December 2021 flood hit Taman Sri Muda hard. Further north, JPS lists Pekan Rawang on Jalan Maxwell and Kawasan Perindustrian Sungai Bakau in Rawang, and names places in Serendah and Sungai Choh as flood-risk spots. For a particular factory, read JPS Selangor's yearly hotspot and risk lists for that district, then visit the lot during heavy rain.
Sources
- Info Banjir JPS Selangor (river levels, rainfall, flood hotspot and flood-risk layers)
- Info Banjir JPS Selangor: water level status definitions
- JPS Selangor flood hotspot list (Hotspot Banjir), 2026 (2024 and 2025 lists read the same way)
- JPS Selangor flood-risk list (Risiko Banjir), 2026 (2024 and 2025 lists read the same way)
- Public Infobanjir, JPS Malaysia
- JPS Selangor: Flood Hazard Map (Peta Kemungkinan Banjir) briefing, 11 August 2025
- JPS Malaysia: Urban Stormwater Management Manual (MSMA) 2nd Edition, 2012
- JPS Malaysia: Kompendium JPS 2022 (MSMA approval and effective dates)
- JPS Malaysia: river reserve guideline, Table 1.1 reserve widths
- World Bank and Bank Negara Malaysia: Managing Flood Risks, Leveraging Finance for Business Resilience in Malaysia (2024)
- The Edge Malaysia: industries likely to be impacted by the recent flood (21 December 2021)
- Malay Mail: Shah Alam floods, MBSA closes roads (24 November 2025)
- Sinar Harian: banjir kilat landa kawasan sekitar Shah Alam, Klang (30 September 2026)
- Sinar Harian: banjir kilat landa beberapa kawasan di Hulu Selangor (16 May 2022)
- New Straits Times: Govt liable for Taman Sri Muda flood losses, High Court rules (September 2026)
- PIAM: member companies expediting flood claims, fire policy cover and claim steps (11 January 2021)
- PIAM: Malaysians encouraged to weather the storm with flood coverage (4 January 2024)
- PIAM: Stronger storms ahead, how Malaysians can prepare for the monsoon (14 November 2025)
- FactoryHub: Shah Alam industrial transaction prices and rents (JPPH-registered)
- FactoryHub: Rawang and Kundang industrial transaction prices and rents (JPPH-registered)
- FactoryHub: Shah Alam Section 23 industrial park
Units on the market nearby
Warehouse for Rent in HICOM Glenmarie Industrial, Shah Alam, 85,894 sq ft
RM 210,000/month
Industrial Land for Sale in Eco Ardence, Shah Alam, 2.38 Acres, Freehold
RM 21,771,450
Warehouse for Sale or Rent in Bukit Jelutong, Shah Alam, 143,864 sq ft
RM 88,880,000 · RM 350,000/month
More on licences, bomba and approvals
- Can I Run a Car Workshop in a Factory Unit in Rawang, Serendah or Shah Alam? Zoning, Council Licence, Used Oil Rules and What I Check
- Factory for Metal Fabrication, CNC Machining and Stamping in Rawang, Serendah and Shah Alam: Zoning Class, Power, Crane, Floor Loading and DOE Checks
- Food Factory Requirements in Rawang, Serendah and Shah Alam: Building Specs for MeSTI Certification, GMP, HACCP and Halal, and the Steps From Lease to Production
- Manufacturing Licence in Malaysia for a Factory in Rawang, Serendah or Shah Alam: Who Needs One, How to Apply to MIDA, How Long It Takes and What Changes When You Move, Expand or Sell