Factory Investment vs Shoplot or House in Rawang, Serendah and Shah Alam: Yield, Tenancy, Vacancy, Loans, RPGT and Upkeep Compared
None of the three has a fixed yield. Dividing the median JPPH-registered terrace factory rent by the median registered price gives about 4.7% a year in Rawang and Shah Alam and 7.3% in Serendah, before costs. A house pays no service tax on rent, keeps the private residence RPGT exemption and pays a lower council rate.
Key Takeaways
- No property type comes with a set yield, so I work it out from registered deals. Dividing the median JPPH-registered terrace factory rent by the median registered price gives about 4.7% a year in Rawang and Kundang and in Shah Alam, and about 7.3% in Serendah, before any cost. That is a ratio of two medians, not the return of any one unit.
- Rent and sale are taxed differently. Rent from a house is outside service tax, and only a house can use the once-in-a-lifetime private residence exemption from RPGT. Rent from a factory or shoplot is taxed at 6% only once the landlord's taxable rental passes RM1 million in 12 months.
- The council charges a factory or shop a higher rate than a house. MPS in Rawang rates a house at 5%, a shop at 6% and a factory at 7% of annual value. MPHS in Serendah rates them at 4%, 9% and 7%.
- Bank Negara's loan caps are written for houses. The 70% cap from an individual's third house loan and the 60% cap on house loans to companies do not cover a factory or shop. There, each bank sets the margin.
- Vacancy risk is different in kind. NAPIC counted 4,185 unsold completed homes, 491 shops and 41 industrial units in Selangor at mid-2026, but a factory still has to suit one tenant's power, access and approvals.
This guide compares the three for Rawang, Serendah, Kundang, Bukit Beruntung and Shah Alam. It is general information, not financial, legal or tax advice, and it promises no return.
What really differs between a factory, a shoplot and a house as an investment?
When a client in Rawang, Serendah or Shah Alam asks me whether to put money into a factory instead of a shoplot or a house, I start with who will rent it. The building type decides the tenant, the council rate, the tax on rent and on sale, how a bank looks at the loan and how many buyers turn up when you sell. The asking price is only one line in that list.
| Point | Factory | Shoplot | House |
|---|---|---|---|
| Who rents it | A manufacturer, warehouse or workshop | A shop, clinic, restaurant or office | A household |
| Service tax on rent | 6% once the landlord's taxable rental exceeds RM1 million in 12 months | Same as a factory | Not taxable (housing accommodation) |
| Council rate at MPS / MPHS / MBSA | 7% / 7% / 7.00% | 6% / 9% / 6.75% | 5% / 4% / see the upkeep section |
| Bank Negara loan-to-value cap | None in the housing measures; the bank decides | None in the housing measures; the bank decides | 70% from an individual's third house loan; 60% for companies |
| RPGT private residence exemption | Not available | Not available | Once in a lifetime for citizens and permanent residents |
| Registered rent figures I can use | JPPH-registered tenancies by factory type | Ranges for named schemes in NAPIC's report | Ranges for named schemes in NAPIC's report |
Each row is explained below, with the page it comes from.
What rental yield do registered figures show for a factory here?
Gross yield is the yearly rent divided by the price. Net yield first takes off cukai pintu, quit rent, insurance, repairs, agent's fees and the months the unit sits empty. No government body publishes an official yield for any of the three types, so a fixed percentage in a sales brochure is a promise, not a measurement. I work through gross, net, cap rate and payback in my guide to calculating factory rental yield.
For factories I can do the sum from JPPH-registered deals, aggregated on FactoryHub's industrial transactions page. The figures cover the 24 months to August 2026, and the counts are the deals recorded in the registered data, not every deal in the area.
| Terrace factory | Median registered rent a month | Rent x 12 | Median registered price | Rent x 12 / price |
|---|---|---|---|---|
| Rawang and Kundang | RM2,600 for about 2,400 sq ft (14 tenancies) | RM31,200 | RM670,000 (38 deals, median land 2,384 sq ft) | about 4.7% |
| Serendah | RM1,500 for about 2,000 sq ft (20 tenancies) | RM18,000 | RM245,000 (256 deals, median land 2,002 sq ft) | about 7.3% |
| Shah Alam | RM4,400 for about 2,600 sq ft (46 tenancies) | RM52,800 | RM1.13 million (70 deals, median land 2,002 sq ft) | about 4.7% |
Three cautions before anyone quotes these. First, the median rent and the median price come from different units, so the ratio describes the market, not a factory you can buy. Second, I only do this where the sizes line up. In Shah Alam the registered detached factory rents are for units of about 9,170 sq ft, while the median detached sale sits on 67,901 sq ft of land, so dividing one by the other would mean nothing. Third, Serendah's higher ratio comes with a small rent in ringgit: RM1,500 a month. If that unit sits empty for two months in a year, the ratio falls from about 7.3% to about 6.1% before any other cost.
Cukai pintu alone moves the figure. Councils base it on annual value, which MBSA describes as the estimated gross monthly rent times 12. At the 7% factory rate, and taking the registered median rent as the annual value, the three terrace examples drop to about 4.3% in Rawang and Kundang, 6.8% in Serendah and 4.3% in Shah Alam, still before quit rent, insurance, repairs and empty months.
Can you get the same figures for a shoplot or a house?
Not in the same form. I have no registered rent series by town for shops or houses, so I work from NAPIC's first half 2026 market report and from the unit itself. The report puts ground floor shop rentals in Bandar Setia Alam and Bandar Baru Ampang at RM7,000 to RM8,500 a month. It lists two and three storey shops in Seksyen 17 Shah Alam, Bandar Sunway Semenyih, TTDI Jaya, Putra Heights and Bandar Pinggiran Subang changing hands at RM2.50 million to RM4.20 million. Those are ranges across different schemes, so I do not divide one by the other.
For houses, the same report gives Selangor's average house price as RM561,187 in the second quarter of 2026 (a preliminary figure), with the state's house price index down 1.1% on a year earlier.
For a specific shop or house, I ask the seller for three things: the stamped tenancy agreement, proof of the rent actually paid over the past year and the last cukai pintu bill. The annual value on that bill is the council's own estimate of the yearly rent, which gives a second opinion on the figure in the advert.
How long do tenants stay, and what protects the tenancy term?
For factories the registered data answers this directly. The typical term of JPPH-registered factory tenancies is 24 months in Rawang and Kundang and in Shah Alam, and 21 months in Serendah.
The legal frame is the same for all three types. Under the National Land Code, section 223 lets an owner grant a tenancy of up to three years without registration, by word of mouth or in writing, while section 221 covers leases of more than three years. I explain what that means for a factory in my guide to how long a factory lease should be.
Houses have no separate tenancy law yet. FMT reported on 12 August 2026 that the Residential Tenancy Bill had still not been tabled in the Dewan Rakyat. A house tenancy, like a shop or factory tenancy, rests on what the agreement says.
When I read a factory tenancy for an investor buying with a tenant inside, I look at the months left, the renewal option and its rent formula, who pays to reinstate the unit, and whether the tenant's licence depends on approvals the building already holds. My guide to screening a factory tenant covers the landlord's side.
How big is the vacancy risk for each?
NAPIC's property market status report for the first half of 2026 counts unsold completed stock in Selangor as follows:
| Selangor, first half 2026 | Unsold completed units | Value |
|---|---|---|
| Residential | 4,185 | RM3,106.88 million |
| Serviced apartments | 4,034 | RM1,801.37 million |
| SOHO | 393 | RM116.92 million |
| Shops | 491 | RM700.05 million |
| Industrial | 41 | RM113.67 million |
NAPIC defines this overhang as units completed with a CCC and still unsold more than nine months after launch. It is new stock from developers, not a vacancy rate for units already owned and let, but it shows how much new supply a resale owner competes with.
Local numbers tell the same story from the other side. The MPHS annual report for 2025 counts 98,792 residential holdings, 11,206 business holdings and 5,501 industrial holdings in Hulu Selangor. A factory owner in Serendah or Bukit Beruntung competes with far fewer units than a house owner, but the pool of tenants is also smaller and each one needs a particular fit: amperage, truck access, floor and ceiling, and a building whose approvals let the council license the trade.
The depth of rental evidence differs too. The registered data holds 119 factory tenancies in Shah Alam over 24 months, against 30 in Serendah and 25 in Rawang and Kundang. What an empty month costs a factory owner, and what can be claimed back from the council, is in my guide to a factory that is not renting out.
How much can you borrow for each?
Bank Negara's caps are housing caps. In November 2010 it set a 70% loan-to-value limit on a borrower's third house financing. In December 2011 it added a 60% limit on housing loans to non-individuals, such as companies. Since July 2013, financing for residential and non-residential property alike has been limited to 35 years.
A factory or shoplot falls outside the two loan-to-value caps, so the margin is each bank's own decision. Banks sell business premises products with their own terms: Alliance Bank lists a tenure of up to 25 years and a margin of up to 95% for a business established for at least three years, and CIMB offers up to 150% covering property and working capital. These are business products. An individual buying a factory only to let it out is assessed under each bank's own policy, so I ask clients to speak to the bank before they pay a deposit.
Two FactoryHub tools help with the numbers: its table of commercial loan rates and its mortgage calculator.
How does RPGT differ when you sell?
The rates in Schedule 5 of the RPGT Act depend on who sells and how long they held the property, not on whether it is a factory, a shop or a house. From HASiL's rate tables:
| Disposal | Citizen or permanent resident (Part I) | Malaysian company (Part II) | Non-citizen without PR (Part III) |
|---|---|---|---|
| Up to the end of the 3rd year | 30% | 30% | 30% |
| In the 4th year | 20% | 20% | 30% |
| In the 5th year | 15% | 15% | 30% |
| 6th year onwards | 0% | 10% | 10% |
The real difference is the private residence exemption. A Malaysian citizen or permanent resident can claim it once in a lifetime on a house they own and occupy, or that is certified fit to live in, by electing through Form CKHT 3. It does not apply to a factory or a shop. My guide to RPGT on a factory sale covers the deductions and the buyer's retention, and buying in a company name or your own name covers why the 10% company rate after five years matters.
Which taxes on rent apply to a factory or shoplot but not to a house?
Service tax on rental. Customs' guide on rental or leasing services (version 2, 14 May 2026) excludes housing accommodation, naming terrace houses, bungalows, semi-detached houses, condominiums and SOHO among others. For everything else, a landlord must register once taxable rental passes RM1 million over 12 months. The rate was 8% from 1 July 2025 and is 6% from 1 January 2026, according to the Ministry of Finance.
Tenants can be exempt as well. A micro, small or medium tenant with annual sales of no more than RM1.5 million that registers through MyPMK does not pay the tax on its rent, and a newly set up SME gets a one-year exemption from its registration date. In practice, an owner of one terrace factory in Serendah at the registered median rent collects RM18,000 a year, far below the RM1 million line.
What upkeep and holding costs differ between the three?
The council rate differs by type and by council. Cukai pintu is annual value times the rate, so the figures below also show what each type pays for every RM10,000 of annual value.
| Council and areas | House | Shop | Factory |
|---|---|---|---|
| MPS: Rawang, Kundang | 5% (RM500) | 6% (RM600) | 7% (RM700) |
| MPHS: Serendah, Bukit Beruntung, Batang Kali, Sungai Choh | 4% (RM400) | 9% (RM900) | 7% (RM700) |
| MBSA: Shah Alam | 3.25% in its rate table | 6.75% (RM675) | 7.00% (RM700) |
MBSA's rate table is dated 2014, and its own worked example for a two storey terrace house uses 4%, so for a Shah Alam house read the rate on the bill. In Hulu Selangor a shop pays a higher rate than a factory, which surprises many buyers. My guide to cukai pintu for a factory shows the factory sums in full.
Quit rent goes to the land office and is due between 1 January and 31 May each year, according to the Petaling land office. For strata units, such as a stratified shop or a condominium, the Hulu Selangor land office explains that cukai petak, charged in Selangor since June 2018, replaces quit rent rather than adding to it. Rates for industrial land are in my guide to quit rent in Selangor.
On a factory I also budget for the parts a tenant's operation depends on: roof sheets and gutters, roller shutters, the electrical intake and the fire protection system, plus a yearly Bomba fire certificate where the building is a designated premises. If the title is leasehold, the years left on it belong in the sum as well; see freehold vs leasehold factories.
What has happened to registered prices in these areas?
Past movements, not a forecast. Comparing the 12 months to August 2026 with the 12 months before, like for like in the same parks, JPPH-registered prices moved as follows:
- Rawang and Kundang: industrial land up 12% across 5 parks.
- Serendah: terrace factories up 4% across 3 parks, industrial land up 3% across 5 parks.
- Shah Alam: terrace factories down 11% across 5 parks, semi-detached factories down 32% across 3 parks.
For houses, NAPIC's Selangor house price index was 1.1% lower in the second quarter of 2026 than a year earlier, as noted above. Prices in Shah Alam show that a factory is not a one-way bet either.
How do I compare the three for a client?
These are the steps I go through before anyone signs, whichever type they lean towards:
- Registered figures for the exact type and area. For factories, the JPPH-registered rents and prices on FactoryHub. For a shop or house, the stamped tenancy and the cukai pintu bill of that unit.
- Gross, then net. I take off the cukai pintu rate of that council, quit rent or cukai petak, insurance and a repair allowance.
- Months empty you can carry. I test the sum with two or three empty months, because one empty month in Serendah costs a full RM1,500.
- Who else could rent it. For a factory: the supply in amps, the road and gate for trucks, the floor, and the CCC and Bomba status, because those decide how wide the tenant pool is.
- The loan route. A third house loan is capped at 70%; a factory or shop depends on the bank's own policy, so I ask for the bank's view early.
- The name on the title. Personal or company ownership changes RPGT after five years and how rent is taxed.
- Tenure. For leasehold, the years left and whether a sale needs state consent.
Related questions, answered in detail on FactoryHub
- What is Sale and Leaseback factory investment? Sale and leaseback means a factory owner sells the building to an investor and then stays on in it as the tenant, paying rent.
- What is Built-to-Suit factory investment? Built-to-suit means a factory is put up on land to a tenant's own specifications, as an alternative to buying a factory that is already built.
- How do you evaluate the exit strategy for industrial real estate? Before selling, look at how factory prices behaved in past downturns, how they recovered afterwards and how long you have held or plan to hold the property.
These questions are answered in full on FactoryHub.
Is Bandar Bukit Raja Industrial Park worth investing in? Bukit Raja is in Klang, outside the areas this page covers. Ms Teh Seok Hoon (PEA 4006), the CID Realtors colleague who handles Klang, sets out freehold Bandar Bukit Raja against Bukit Raja Selatan, the council, roads, deals and rents in her Bukit Raja Industrial Park notes; run the same yield and holding-cost checks above on those figures.
If you are weighing a factory against a shoplot or a house in Rawang, Serendah, Kundang, Bukit Beruntung or Shah Alam, WhatsApp Jason Low (Probationary Estate Agent PEA 1478, CID Realtors Sdn Bhd E(1) 1855) on +60 12-288 1834.
Questions people ask
01Are industrial properties a good investment compared with houses?+
It depends on the unit and on how long you can carry it empty. JPPH-registered medians put the terrace factory rent at about 4.7% of price a year in Rawang and Shah Alam and about 7.3% in Serendah before costs, but a factory needs a tenant whose business fits its power, access and approvals. A house has a wider pool of tenants, no service tax on rent and the private residence RPGT exemption.
02How much can I borrow to buy a factory or shoplot?+
Bank Negara's 70% cap on a third house loan and 60% cap on house loans to companies do not apply to a factory or shop, so each bank decides the margin. Business premises products list margins such as up to 95% at Alliance Bank, but an individual buying only to let is assessed under the bank's own policy. All property financing is limited to 35 years.
03Do I charge service tax on factory or shoplot rent?+
Only once your taxable rental from non-residential property passes RM1 million in 12 months. The rate is 6% from 1 January 2026. Rent from houses, condominiums and SOHO is excluded, and SME tenants with annual sales up to RM1.5 million registered through MyPMK are exempt.
04Is RPGT different for a factory and a house?+
The rates are the same: for a citizen, 30% up to the third year, 20% in the fourth, 15% in the fifth and 0% from the sixth year, while a company pays 10% from the sixth year. The difference is that only a house can use the once-in-a-lifetime private residence exemption for citizens and permanent residents.
05Which pays more cukai pintu in Serendah: a shop, a factory or a house?+
MPHS charges 9% of annual value on business holdings, 7% on industrial holdings and 4% on residential holdings. So for the same annual value, a shop in Serendah or Bukit Beruntung pays more than a factory, and a house pays the least.
06What is the difference between an investment property and an owner-occupied one here?+
For a house, owner occupation matters: the RPGT private residence exemption needs a house you own and occupy or that is fit to live in, and Bank Negara's 70% cap counts your house loans. For a factory, the business premises loans banks list are aimed at established businesses, such as Alliance Bank's minimum of three years in operation, while an individual buying only to let is assessed under each bank's own policy.
07What is the main risk of factory investment in Rawang, Serendah or Shah Alam?+
The main risk is a long vacancy, because a factory suits only a narrow group of tenants. It has to fit one business on power supply, truck access, floor and ceiling, and on approvals that let the council license the trade. NAPIC counted 41 unsold completed industrial units in Selangor at mid-2026, and in Serendah one empty month costs the whole RM1,500 registered median rent. Before buying, check the unit's CCC, Bomba status and power supply, and confirm with the council (MPHS, MPS or MBSA) that the trade can be licensed there.
08Which is a better factory investment, Shah Alam or Puchong?+
Neither area has a published yield, so the fair comparison is registered deals. In Shah Alam, JPPH-registered medians put terrace factory rent at about 4.7% of the price a year before costs, and registered terrace factory prices there fell 11% across 5 parks in the 12 months to August 2026. Peter Tan covers Puchong on FactoryHub, where the registered Puchong figures are also available. Puchong comes under MBSJ, so check its rate with MBSJ.
Sources
- FactoryHub: Industrial transactions (JPPH-registered prices and rents, Rawang & Kundang, Serendah, Shah Alam)
- FactoryHub: Commercial loan rates
- FactoryHub: Mortgage calculator
- NAPIC (JPPH): Laporan Status Pasaran Harta H1 2026 (unsold completed units by state)
- NAPIC (JPPH): Laporan Pasaran Harta Separuh Pertama 2026 (shop rents and prices, Malaysian House Price Index)
- Majlis Perbandaran Selayang: Soalan lazim (assessment rates by property type)
- Majlis Perbandaran Hulu Selangor: Laporan Tahunan 2025 (holdings by use and current rates)
- Majlis Bandaraya Shah Alam: Cukai taksiran (annual value and rate table)
- Pejabat Daerah dan Tanah Petaling: Soalan lazim cukai tanah
- Pejabat Daerah dan Tanah Hulu Selangor: Cukai tanah dan cukai petak
- HASiL: Real Property Gains Tax (RPGT) rates
- HASiL: RPGT exemption (private residence, once in a lifetime)
- Royal Malaysian Customs Department: Panduan Perkhidmatan Sewaan atau Pajakan, versi 2 (14 May 2026)
- Ministry of Finance: updated SST policy, 5 January 2026 (rental service tax 6%, SME tenant threshold RM1.5 million)
- Ministry of Finance: revision to the expanded SST (rental registration threshold RM1 million)
- Bank Negara Malaysia: 70% loan-to-value ratio on the third house financing (November 2010)
- Bank Negara Malaysia: maximum 35-year tenure for residential and non-residential property financing (July 2013)
- Bank Negara Malaysia: Deputy Governor on macroprudential policies (60% LTV on housing loans by non-individuals, December 2011)
- Alliance Bank: Business Premises Financing
- CIMB: SME Biz Property Financing
- National Land Code (Act 828), sections 221 and 223 (FAOLEX copy)
- Free Malaysia Today: Don't delay tabling Residential Tenancy Bill to 2027, NGO tells govt (12 August 2026)
Units on the market nearby
Semi-D Factory for Rent in Saujana Teknologi Rawang, Rawang, 6,525 sq ft
RM 10,500/month
Semi-Detached Factory for Sale or Rent in Saujana Rawang, Rawang, 8,000 sq ft
RM 4,000,000 · RM 15,000/month
Detached Factory for Rent in Batu 17 Rawang, 9,000 sq ft
RM 21,000/month
More on industrial property investment
- How to Calculate Factory Rental Yield in Malaysia: Gross, Net, Cap Rate, Payback and Loan Cash Flow, Worked on Shah Alam, Rawang and Serendah Figures
- Is There a Factory Oversupply in Rawang, Serendah or Shah Alam? NAPIC Stock, Pipeline and Unsold Units for Gombak, Hulu Selangor and Petaling
- Have Industrial Land and Factory Prices Risen in Rawang, Serendah and Shah Alam? Registered Prices Since 2021 and the Infrastructure Near Each
- Industrial Land Investment in Rawang, Serendah and Shah Alam: Holding Costs, Idle Land Conditions, Loans, RPGT and Registered Prices