How to Calculate Factory Rental Yield in Malaysia: Gross, Net, Cap Rate, Payback and Loan Cash Flow, Worked on Shah Alam, Rawang and Serendah Figures
Gross rental yield is a year's rent divided by the price. On JPPH-registered medians, a Shah Alam semi-detached factory renting at RM17,300 a month against RM5.92 million gives about 3.5% gross, and about 2.9% after cukai pintu, quit rent, a letting fee and one empty month every two years. Neither is a promised return.
Key Takeaways
- Gross yield is a year's rent divided by the price, and nothing else. On JPPH-registered medians for a Shah Alam semi-detached factory, RM17,300 a month against RM5.92 million works out to about 3.5% gross. That is a ratio of two medians, not the return of any one unit.
- Net yield takes off what the owner pays. Cukai pintu at 7% of annual value (MPS, MPHS and MBSA all rate industrial holdings at 7%), quit rent, the letting fee and one empty month every two years bring that 3.5% down to about 2.9%, before insurance and repairs.
- A cap rate is the same sum turned round: value equals net income divided by a rate. Axis REIT paid RM38 million in 2026 for a fully let industrial complex in Seksyen 16, Shah Alam, collecting RM210,476.75 a month. That is a 6.65% gross initial yield on leases averaging 2.25 years left.
- Cash flow depends on the loan as much as the yield. At 4.5% over 25 years a loan costs about 6.67% of its amount every year. A factory yielding 3.5% gross cannot carry an 80% loan; a 6.65% yield covers a 70% loan before the owner's costs.
- Payback at these figures is long: about 28.5 years of gross rent for the Shah Alam semi-detached example and about 15 years for the Seksyen 16 deal, before rent reviews, price changes or tax. Nothing here is a promised return.
When a buyer or an owner in Shah Alam, Rawang or Serendah asks me what a factory yields, I do not quote a percentage. I put the rent, the price, the costs and the loan on one sheet and work it through. This guide shows that sheet with registered figures and one public deal. It is general information, not financial, tax or valuation advice.
What is the difference between gross yield, net yield, cap rate, ROI and payback?
They are different questions asked of the same rent and price.
| Measure | How it is worked out | What it answers |
|---|---|---|
| Gross yield | Rent for 12 months divided by the price | A quick screen; it ignores every cost |
| Net yield | Rent for 12 months, less the owner's costs and empty months, divided by the price (or by the price plus purchase costs) | What the building earns on the money in it |
| Cap rate | Net operating income divided by value; turned round, value equals net income divided by the rate | How valuers and institutional buyers price a let building |
| Cash-on-cash ROI | Cash left each year after costs and loan instalments, divided by your own cash put in | What your own money earns when you borrow |
| Payback | Price divided by a year's rent, gross or net | How many years of rent repay the price, ignoring any change |
| Total return | Net rent plus the change in value, divided by the price | Income and capital together, known only after you sell |
All the yields in this guide are before income tax. How rent is taxed depends on whose name is on the title, which I cover in buying in a company name or your own name.
How do I calculate gross rental yield on a factory?
For a unit that is already let, I take the rent in the stamped tenancy agreement, check it against 12 months of receipts, multiply by 12 and divide by the price. For a market check I use JPPH-registered deals, but only where the factory type and size line up.
Shah Alam is where they line up most closely. FactoryHub's Shah Alam transaction page shows, for the 24 months to August 2026:
- semi-detached factory: 66 deals in 24 months, median price RM5.92 million, typical range RM4.62 million to RM7.14 million, RM514 psf of land, median land 10,779 sq ft.
- semi-detached factory rent: RM2.12 psf/month, median monthly rent RM17,300 for about 8,810 sq ft (24 tenancies).
The sum: RM17,300 x 12 = RM207,600 a year. RM207,600 divided by RM5,920,000 = about 3.5% gross.
Two cautions. The median rent and the median price come from different units, so this describes the market, not a factory you can buy. And the rent is per sq ft of floor let, while the sale psf is per sq ft of land. I never divide where sizes do not match: Shah Alam's registered detached tenancies have a median rent of RM12,200 for about 9,170 sq ft, while the detached sale median is RM16 million on 67,901 sq ft of land. Those are different buildings.
Up north the registered data is thinner. In Rawang and Kundang the semi-detached sale median is RM4.3 million across 129 deals, but there is no semi-detached rent line; factory tenancies as a whole show a median rent of RM1.39 psf/month, typical RM0.91 psf/month to RM2.22 psf/month, over 25 tenancies (Rawang and Kundang figures). So for a Rawang semi-detached unit I build the yield from that unit's own tenancy and check its rent per sq ft against that range. In Serendah the terrace factory median price is RM245,000 and the median terrace rent is RM1,500 for about 2,000 sq ft (Serendah figures), which is about 7.3% gross on a small rent. My comparison of factory, shoplot and house investment sets out the terrace ratios for all three areas.
What comes off the rent to get net yield?
Here is the Shah Alam semi-detached example taken from gross to net, assuming the owner pays the outgoings and the council's annual value equals the rent.
| Cost | Rule or rate | Per year in the example |
|---|---|---|
| Cukai pintu | 7% of annual value. MPS (Rawang), MPHS (Serendah, Bukit Beruntung, Batang Kali) and MBSA (Shah Alam) all list industrial holdings at 7% | RM14,532 |
| Quit rent | MIDA lists RM2,700 to RM24,000 per hectare a year for industrial land in Selangor | RM270 to RM2,403 on 10,779 sq ft; I use the top |
| Letting fee | The LPEPH scale of fees: up to 1.25 months' gross rent for a tenancy of up to 3 years, minimum one month | RM21,625 per two-year letting, about RM10,813 |
| Empty months | My own test allowance: one month every two years | RM8,650 |
| Insurance | Fire cover, and cover for loss of rent | Varies: get the insurer's quote |
| Repairs | Roof sheets, gutters, shutters, electrical intake, fire system | Varies with age and with the lease |
RM207,600 less RM14,532, RM2,403, RM10,813 and RM8,650 leaves about RM171,202, or about 2.9% of the price, before insurance and repairs. Every RM10,000 a year of insurance and repairs takes about another 0.17 percentage points off.
MBSA defines annual value as the estimated gross monthly rent times 12, and MPS says the tax is based on the estimated yearly rent, so cukai pintu moves with the rent the council expects, not your actual rent. The bill on the unit is what counts: see my guides to cukai pintu and quit rent. Many factory tenancies pass some outgoings or repairs to the tenant, which lifts the owner's net figure; my guide on who pays for repairs covers how leases split them.
Purchase costs lower the yield again. Under item 32(a) of the Stamp Act 1949, transfer duty is 1% on the first RM100,000, 2% to RM500,000, 3% to RM1 million and 4% above: RM220,800 on RM5.92 million. On price plus that duty, the net figure falls to about 2.8%, before legal fees.
Service tax does not belong in the yield. Rent is quoted before the 6% service tax that applies from 1 January 2026 (Ministry of Finance), and a landlord registers only once taxable rental passes RM1 million a year. Details are in my SST on factory rental guide.
How much rent does a RM5 million or RM10 million factory collect?
There is no fixed answer, because rent follows the building's size, type and location, not its price. What I can show is the rent a price needs for a given gross yield:
| Price | At 3.5% gross | At 5% gross | At 6.65% gross |
|---|---|---|---|
| RM5 million | RM14,583 a month | RM20,833 a month | RM27,708 a month |
| RM10 million | RM29,167 a month | RM41,667 a month | RM55,417 a month |
The 3.5% column is the Shah Alam semi-detached ratio above and the 6.65% column is the Seksyen 16 deal below; 5% sits between them. These are sums, not rents any factory will fetch.
RM5 million is semi-detached money here: the registered median is RM4.3 million in Rawang and Kundang and RM5.92 million in Shah Alam, where the semi-detached median rent is RM17,300. RM10 million is detached money up north (medians RM6.92 million in Rawang and Kundang and RM8.65 million in Serendah). My guide to what RM3m to RM20m buys goes through each level. If a seller's rent implies a yield far above these sums, I ask for the stamped tenancy and a year of receipts before anything else.
What is a cap rate, and how is a factory let to a listed company valued?
A cap rate is net operating income divided by value. Valuers turn it round: they take the net income a let building produces and divide it by a rate drawn from comparable deals. The Board's valuation standard on methods says that under the investment method the gross income must be based on prevailing rents of similar properties, outgoings must be supported by evidence, and the capitalisation rate by rates for comparable properties.
The clearest local evidence this year is in Seksyen 16. The Star reported that Axis REIT agreed to buy a corner industrial complex on 3.03 acres of leasehold land for RM38 million, with about 120,177 sq ft of net lettable area, fully let for a combined RM210,476.75 a month. The Edge named the three tenants: OCK Telco Infra Sdn Bhd, Tamura Electronics (M) Sdn Bhd and Seng Hup Lightings & Decor Sdn Bhd. The REIT's quarterly report places it in Seksyen 16 and records completion on 30 September 2026, and its 3Q 2026 presentation gives a weighted average lease expiry of 2.25 years at acquisition.
My arithmetic on those figures:
- Gross initial yield: RM210,476.75 x 12 = RM2,525,721, divided by RM38 million = 6.65%.
- Rent per sq ft of lettable area: about RM1.75 a month. Shah Alam's registered factory rent has a median of RM1.71 psf/month, typical RM1.28 psf/month to RM2.47 psf/month, so the rent sits close to the registered median rather than above it.
- Price per sq ft of lettable area: about RM316.
What the same rent is worth at different rates shows why the rate matters more than any other input:
| Rate applied to RM2,525,721 a year | Value |
|---|---|
| 6.0% | about RM42.1 million |
| 6.65% | about RM38.0 million |
| 7.0% | about RM36.1 million |
| 7.5% | about RM33.7 million |
| 8.0% | about RM31.6 million |
When the tenant is, or belongs to, a listed company, these are the points I check before anyone pays for the name:
- Who signs. The tenant is often a Sdn Bhd subsidiary, as all three Seksyen 16 tenants are. If the parent's strength is what you are paying for, ask whether the parent guarantees the rent.
- Years left and the way out. The unexpired term, any break clause, and the renewal option and its rent formula. A short lease to a strong name is still a short lease.
- Rent against registered rent. A rent well above the registered range can fall at renewal.
- Who pays the outgoings. Cukai pintu, quit rent, insurance and structural repairs decide whether the rent is gross or close to net.
- The next tenant. Power, floor, height and access decide how quickly the building lets again if the name leaves.
My guide to buying a tenanted factory covers the documents to ask for.
Will the rent cover the loan, and how many years to pay back?
Each bank sets its own factory loan rate. Bank Negara kept the OPR at 2.75% on 5 November 2026 (BNM), and Maybank's base rate was 2.75% and its BLR 6.40% from 11 July 2025 (The Star). The rates below are illustrations, not quotes.
The useful number is the yearly instalment as a share of the loan. Over 25 years it is about 6.33% at 4%, 6.67% at 4.5% and 7.02% at 5%. Rent covers the instalment only when the net yield is above the loan share times that figure: at 4.5% over 25 years, 5.34% for an 80% loan, 4.67% for 70% and 4.00% for 60%.
Shah Alam semi-detached example, 80% loan of RM4,736,000 over 25 years:
| Rate | Monthly instalment | Net rent a month (before insurance and repairs) | Gap |
|---|---|---|---|
| 4.0% | RM24,998 | about RM14,267 | about RM10,731 short |
| 4.5% | RM26,324 | about RM14,267 | about RM12,057 short |
| 5.0% | RM27,686 | about RM14,267 | about RM13,419 short |
At 4.5% the interest alone in the first year is about RM210,974, more than the full year's rent of RM207,600. The net rent would carry a loan of about RM2.57 million, roughly 43% of the price. Part of each instalment repays principal, so negative cash flow is not the same as a loss, but you fund the gap every month.
Seksyen 16 deal, 70% loan of RM26.6 million at 4.5% over 25 years: about RM147,851 a month against rent of RM210,476.75, leaving about RM62,625 before the owner's costs. That is the difference a 6.65% yield makes.
Payback, ignoring rent reviews, price changes and tax: about 28.5 years of gross rent and about 34.6 years of net rent for the semi-detached example, and about 15 years of gross rent for the Seksyen 16 deal.
How much do empty months and hidden costs cut the yield?
Each empty month costs a twelfth of the year's rent, about 8.3% of the income. On the semi-detached example that is about 0.29 percentage points of yield for every month empty in a year. The typical term of registered factory tenancies is 24 months in Rawang and Kundang and in Shah Alam, and 21 months in Serendah, so a factory comes up for letting about every two years. If three months pass between two-year tenancies, the unit is let 24 months out of 27 and the 3.5% gross becomes about 3.1%.
Large landlords see gaps too. Axis REIT's 3Q 2026 presentation reports that a tenancy expiry at its Shah Alam Distribution Centre 3 at the end of the first quarter lowered income until the space was filled, reaching 100% at the end of the third quarter, and that Shah Alam Distribution Centre 5 was expected to be 82% occupied by the fourth quarter after a lease ended in the second. The same presentation notes rent suspended at another building after a February 2026 fire, covered by takaful that included loss of rental. That is why I ask owners to price loss of rent cover, not only fire cover.
Other costs that rarely appear in a yield quoted by a seller: cukai pintu while the unit is empty (my guide to a factory that is not renting out covers council remission), reinstatement disputes at the end of a tenancy, the yearly fire certificate where the building needs one, legal fees, income tax on the rent and RPGT when you sell.
What about capital appreciation?
Registered prices have moved both ways. Comparing the 12 months to August 2026 with the 12 months before, like for like in the same parks:
- Rawang and Kundang: industrial land +12% across 5 parks.
- Serendah: terrace factories +4% across 3 parks; industrial land +3% across 5 parks.
- Shah Alam: terrace factories -11% across 5 parks; semi-detached factories -32% across 3 parks.
These are past movements over a small number of parks, not a forecast. They show why yield and capital have to be read together: on a RM5.92 million factory, every 1% move in price is RM59,200, about 28.5% of a year's gross rent in the example. For an owner, my guide to selling a factory with a tenant or vacant covers how the remaining term moves the price.
What is a good rental yield for a factory, and is 3.5% enough?
No official body publishes a benchmark factory yield. I judge a figure against four things instead:
- The loan. Does the net yield clear the loan share times the instalment factor above? If not, you are topping up every month.
- The evidence. Registered medians give about 3.5% for Shah Alam semi-detached factories, about 4.7% for terrace factories in Rawang and Kundang and in Shah Alam, and about 7.3% for Serendah terraces. A let deal priced at 6.65% came with 2.25 years of leases left.
- Institutional figures. Axis REIT's 3Q 2026 presentation reports manufacturing facilities at 8.9% gross and 8.1% net, and a portfolio average of 9.1% gross and 7.8% net. The slide does not state whether these are measured on cost or on current value, so I treat them as a portfolio's figures, not a buying yield.
- Your reason for buying. An owner who plans to occupy the factory later may accept a lower yield than a pure investor would.
So 3.5% gross is thin for a buyer who needs the rent to pay an 80% loan, and may be acceptable for a cash buyer who values the building itself.
How I run the numbers before a client signs
- Stamped tenancy, 12 months of receipts and the current cukai pintu and quit rent bills.
- Rent per sq ft compared with the registered range for that area and type.
- Gross yield, then net yield with the council rate, quit rent, letting fee, insurance, repairs and at least one empty month.
- Net yield on price plus stamp duty and legal fees.
- The loan at two or three rates from the bank, in writing, and the monthly gap or surplus.
- For a let building, the tenant entity, guarantee, years left, break clauses and who pays the outgoings.
- Registered price movements in that park, read as history, not promise.
If you want these numbers worked through for a factory in Rawang, Serendah, Kundang, Bukit Beruntung or Shah Alam, WhatsApp Jason Low (Probationary Estate Agent PEA 1478, CID Realtors Sdn Bhd E(1) 1855) on +60 12-288 1834.
Building long-term rental income from factories
How do you build long-term passive income from a factory in Rawang or Shah Alam?
It comes from rent that is still left after costs, empty months and the loan, not from a headline yield. Start with gross yield, then take off cukai pintu at 7% of annual value (MPS, MPHS and MBSA all rate industrial holdings at 7%), quit rent, the letting fee and empty months to reach net. Registered medians put Shah Alam semi-detached factories at about 3.5% gross, so compare the net figure with your loan before you buy.
Questions people ask
01What is the typical rental yield for a factory in Selangor?+
There is no official figure. Dividing JPPH-registered median rents by median prices gives about 3.5% gross for Shah Alam semi-detached factories, about 4.7% for terrace factories in Rawang, Kundang and Shah Alam, and about 7.3% for Serendah terraces. A fully let Seksyen 16 complex sold in 2026 at 6.65% gross. These are ratios and one deal, not returns any unit will give.
02Is 3.5% a good rental yield for a factory?+
It depends on how you pay for it. At 4.5% over 25 years a loan costs about 6.67% of its amount each year, so a 3.5% gross yield cannot carry an 80% loan and leaves a gap every month. For a cash buyer who also values the building itself, it may be acceptable.
03How many years does it take for a factory to pay for itself?+
Divide the price by a year's rent. At registered medians a Shah Alam semi-detached factory takes about 28.5 years of gross rent and about 34.6 years of net rent, and the 2026 Seksyen 16 deal about 15 years of gross rent. Rent reviews, empty months, price changes and tax all move that figure.
04Can a factory give positive cash flow with a bank loan?+
Only if the net yield is above the loan share times the yearly instalment factor. At 4.5% over 25 years that means about 5.34% for an 80% loan, 4.67% for 70% and 4.00% for 60%. Get the bank's rate and margin in writing before you sign.
05What hidden costs reduce a factory's rental yield?+
Cukai pintu at 7% of annual value at MPS, MPHS and MBSA, quit rent, a letting fee of up to 1.25 months' rent for a tenancy of up to three years, empty months, insurance including loss of rent, repairs, stamp duty and legal fees on purchase, and income tax on the rent. Each empty month alone costs about 8.3% of a year's rent.
06How do I value a factory that is let to a listed company?+
A valuer divides the net rent by a capitalisation rate drawn from comparable deals, so check the passing rent against registered rents, the years left, any break clause and who pays the outgoings. Confirm whether the tenant is the listed company or a Sdn Bhd subsidiary, and whether the parent guarantees the rent.
07Which industrial area in the Klang Valley has the highest rental yield for a factory?+
No area can be named the highest, because no official body publishes a benchmark factory yield. Dividing JPPH-registered median rents by median prices gives about 7.3% gross for Serendah terrace factories, about 4.7% for terrace factories in Rawang and Kundang and in Shah Alam, and about 3.5% for Shah Alam semi-detached factories. One let complex in Seksyen 16, Shah Alam, sold in 2026 at 6.65% gross. For any unit you are considering, work from its own stamped tenancy and council bills.
08Which industrial area in northern Selangor or Shah Alam makes it easier to rent out a factory?+
Shah Alam has the deepest registered evidence: semi-detached factories there recorded 24 tenancies and 66 sales in the 24 months to August 2026. Rawang and Kundang show only 25 factory tenancies across all types, so the picture is thinner, and Serendah terrace factories let at a median of RM1,500 for about 2,000 sq ft. Whether a particular unit lets still comes down to its power, floor and access, so check those and confirm rents with MPS or MPHS.
Sources
- FactoryHub: JPPH-registered industrial transactions and rents, Shah Alam (24 months to August 2026)
- FactoryHub: JPPH-registered industrial transactions and rents, Rawang and Kundang
- FactoryHub: JPPH-registered industrial transactions and rents, Serendah
- The Star (13 May 2026): Axis REIT to purchase Shah Alam industrial complex for RM38mil
- The Edge Malaysia: Axis REIT acquires Shah Alam industrial complex for RM38m (tenants and monthly rent)
- Axis REIT: quarterly report for the period ended 30 September 2026 (Bursa filing; Seksyen 16 acquisition completed 30 September 2026)
- Axis REIT: 3Q 2026 results presentation (WALE at acquisition, portfolio yields, Shah Alam lease expiries)
- Majlis Perbandaran Selayang: Soalan lazim (assessment rates, industrial 7%)
- Majlis Perbandaran Hulu Selangor: Laporan Tahunan 2025 (current assessment rates, industrial 7%)
- Majlis Bandaraya Shah Alam: Cukai taksiran (annual value and rate table, industrial 7.00%)
- MIDA: Cost of industrial land and quit rent per annum, Selangor
- LPEPH (Board of Valuers, Appraisers, Estate Agents and Property Managers): Scale of fees, estate agency lettings
- LPPEH: Malaysian Valuation Standards, approaches and methods of valuation (investment method)
- Stamp Act 1949, First Schedule item 32(a) (Invest Malaysia copy)
- Bank Negara Malaysia: Monetary Policy Statement, 5 November 2026 (OPR 2.75%)
- The Star (9 July 2025): Maybank cuts base rate and BLR by 25 basis points
- Ministry of Finance: updated SST policy (rental service tax 6% from 1 January 2026)
- Ministry of Finance: revision to the expanded SST (rental registration threshold RM1 million)
Units on the market nearby
Warehouse for Rent in HICOM Glenmarie Industrial, Shah Alam, 85,894 sq ft
RM 210,000/month
Industrial Land for Sale in Eco Ardence, Shah Alam, 2.38 Acres, Freehold
RM 21,771,450
Warehouse for Sale or Rent in Bukit Jelutong, Shah Alam, 143,864 sq ft
RM 88,880,000 · RM 350,000/month
More on industrial property investment
- Is There a Factory Oversupply in Rawang, Serendah or Shah Alam? NAPIC Stock, Pipeline and Unsold Units for Gombak, Hulu Selangor and Petaling
- Have Industrial Land and Factory Prices Risen in Rawang, Serendah and Shah Alam? Registered Prices Since 2021 and the Infrastructure Near Each
- Factory Investment vs Shoplot or House in Rawang, Serendah and Shah Alam: Yield, Tenancy, Vacancy, Loans, RPGT and Upkeep Compared
- Industrial Land Investment in Rawang, Serendah and Shah Alam: Holding Costs, Idle Land Conditions, Loans, RPGT and Registered Prices