Factory Not Renting Out in Rawang, Serendah or Shah Alam: Setting the Rent Price From Registered Rents, What to Repair and What an Empty Month Costs
Set rent inside the registered band for the factory's type and area: the median JPPH-registered factory rent was RM1.39 psf a month in Rawang and Kundang, RM0.95 in Serendah and RM1.71 in Shah Alam. Repair what blocks move-in, and give the council written notice within seven days so empty months can earn back part of cukai pintu.
Key Takeaways
- Price from registered rents, not from other owners' asking rents. In the 24 months to August 2026, JPPH-registered factory tenancies had a median of RM1.39 psf a month in Rawang and Kundang, RM0.95 in Serendah and RM1.71 in Shah Alam.
- An empty month costs a full month's rent. On a Rawang terrace factory at the registered median of RM2,600 a month, asking RM400 more brings in RM9,600 over a 24-month term, and less than four extra empty months wipes that out.
- Repair what stops a tenant moving in, and leave fit-out to a tenant who has signed. Roof leaks, power, shutters and fire equipment come first; offices, mezzanines and power upgrades should follow the tenant's own layout.
- Part of the cukai pintu can come back. Under section 162 of the Local Government Act 1976, MPS, MPHS and MBSA may refund rates for months a building stands empty, but only after written notice within seven days and proof of a reasonable rent and real marketing.
- Tell your fire insurer before day 30. Standard Malaysian fire policies stop covering a building left unoccupied for more than 30 days unless the insurer has endorsed the policy first.
Why does a factory in Rawang, Serendah or Shah Alam sit empty?
When an owner asks me why nobody has taken their unit, I go through five questions in this order, because a tenant goes through them too:
- Is the asking rent inside the registered band for this factory type in this area? A terrace factory in Serendah and a terrace factory in Shah Alam are different markets, and the registered rents in the next section show how far apart they are.
- Can the tenant get approvals in it? A tenant needs a council licence and, for many uses, Bomba's agreement. A missing CCC or CF, an extension that was never approved or fire equipment that does not work ends the conversation. I check these the same way as in my guides on illegal factory extensions and the Bomba fire certificate.
- Does the power match what tenants run? A manufacturer will ask for the supply in amps. Know the figure on the main switch and the TNB tariff of the account before you advertise; my TNB tariff guide explains what each supply puts a tenant on.
- Can their lorries get in? For warehouse and logistics tenants, road width, gate and turning space decide the shortlist before rent does. See 40-footer truck access.
- Does it look ready on the day of the viewing? Stains from a roof leak, dead lights, overgrown grass and the last tenant's pallets make a tenant price in repairs, and then ask you to pay for them.
What rent do tenants actually register in Rawang, Serendah and Shah Alam?
These are JPPH-registered factory tenancies over the 24 months to August 2026, as published on FactoryHub's transaction pages for Rawang and Kundang, Serendah and Shah Alam. They count registered tenancies only, not every unit let, and rents are per sq ft of rented floor area per month.
| Area | Factory type | Registered rent per month | Median monthly rent | Tenancies |
|---|---|---|---|---|
| Rawang and Kundang | Terrace | RM1.06 psf | RM2,600 for about 2,400 sq ft | 14 |
| Rawang and Kundang | Detached | RM2.53 psf | RM12,500 | 7 |
| Rawang and Kundang | All factories | RM1.39 psf, typical RM0.91 to RM2.22 | not split | 25 |
| Serendah | Terrace | RM0.77 psf | RM1,500 for about 2,000 sq ft | 20 |
| Serendah | Detached | RM1.06 psf | RM4,000 for about 4,160 sq ft | 5 |
| Serendah | All factories | RM0.95 psf, typical RM0.70 to RM1.10 | not split | 30 |
| Shah Alam | Terrace | RM1.79 psf | RM4,400 for about 2,600 sq ft | 46 |
| Shah Alam | Semi-detached | RM2.12 psf | RM17,300 for about 8,810 sq ft | 24 |
| Shah Alam | Detached | RM1.50 psf | RM12,200 for about 9,170 sq ft | 34 |
| Shah Alam | Stratified | RM2.09 psf | RM5,300 for about 2,630 sq ft | 13 |
| Shah Alam | All factories | RM1.71 psf, typical RM1.28 to RM2.47 | not split | 119 |
This is how I turn the table into an asking rent:
- Start from the median for your factory type, not the all-factory figure. A detached unit and a terrace unit in the same town are let to different tenants.
- Move within the typical range only for things tenants pay for: a bigger power supply, a CCC in hand, a wide gate and turning space, a clean floor and a fire system that works. Move down for an old roof, low power or a narrow access road.
- Compare per sq ft, not per month. Your unit is rarely the median size.
- Watch how wide the band is. In Serendah the typical range is narrow, RM0.70 to RM1.10 psf, so an asking rent well above RM1.10 stands out to anyone who has viewed a few units in Bukit Beruntung. In Shah Alam the typical range runs from RM1.28 to RM2.47 psf, so where your unit sits inside it matters more than the median.
The typical registered term was 24 months in Rawang and Kundang and in Shah Alam, and 21 months in Serendah. That term is what the next sum is built on.
How long can I hold out for a higher rent?
Here is a worked sum, using the registered medians and an asking rent I picked only to illustrate:
- A Rawang terrace factory has a registered median rent of RM2,600 a month. Ask RM3,000 instead, and the extra RM400 a month brings in RM9,600 over a 24-month term.
- Every month the unit stands empty loses RM2,600 of rent, before cukai pintu, quit rent, insurance and loan interest.
- RM9,600 divided by RM2,600 is about 3.7. If the higher asking rent keeps the factory empty about four months longer than the median rent would, you finish the term behind.
The same sum for a Serendah terrace factory at the RM1,500 median, asking RM300 more over the 21-month typical term, gives RM6,300, or about 4.2 months of rent.
The rule I use with owners is simple: extra rent per month, times the months in the term, divided by the full monthly rent, gives the number of empty months the premium can pay for. If the unit has already been empty longer than that, the premium has stopped making sense. Before cutting the rent, I also look at terms that may cost the owner less than a cut: a rent-free period for the tenant's fit-out, a longer term with a fixed rent review, or a repair the tenant has asked for. To check whether Rawang, Serendah or Shah Alam has a factory oversupply, see my guide to NAPIC stock and unsold units.
Should I repair or renovate before the next tenant?
Repair first, before the first viewing:
- roof sheets, gutters and downpipes that leak;
- roller shutters, gates and doors that do not run smoothly;
- the main switchboard, lighting and earthing;
- fire extinguishers and hose reels serviced and tagged;
- toilets, water supply and the drains around the building;
- the last tenant's stock, pallets and rubbish cleared, and the grass cut.
Three rules point the same way. Section 162(3)(a) of the Local Government Act 1976 only allows a vacancy refund on a building that is in good repair and fit for occupation, and months spent on repairs to make it fit can be claimed without proving the rent and marketing tests. LHDN's Public Ruling No. 12/2018 allows ordinary repair that maintains the property in its existing state as a deduction against rent (paragraph 8.2). The same ruling (paragraph 8.4.2) keeps expenses allowable during a temporary break caused by repair or renovation, or by up to two years without a tenant after a tenancy ends, provided the property is maintained in good condition and ready to be let.
Renovate for a tenant who has signed. Offices, mezzanines, partitions, an extra loading bay and a power upgrade should follow the tenant's own layout and machines, or they become something the next tenant pays to remove. Each needs a council permit at MPS, MPHS or MBSA; my guide on renovations and reinstatement lists them. Once the works are done, or once an empty building is occupied again, section 161 of the Act requires the owner to tell the council in writing within 15 days, and failing to give that notice can bring a fine of up to RM2,000 on conviction.
What does an empty factory cost each month?
- Rent not collected. Usually the heaviest cost, and the one owners tend to count last.
- Cukai pintu. The owner pays it, empty or not, under section 146 of the Act, as MPS reminds ratepayers. MPS now charges industrial holdings 7% of the annual value, down from 12%, and the Act defines annual value as the estimated gross annual rent at which the holding might reasonably be let from year to year. The bill is set on a rent the council estimates, tenant or no tenant. My cukai pintu guide compares MPS, MPHS and MBSA.
- Quit rent to the land office every year; see quit rent for industrial land.
- Fire insurance. Malaysian fire policy wordings, such as RHB Insurance's Condition 9 on change in risk, say the insurance ceases to attach if the building becomes unoccupied and stays so for more than 30 days, unless the insurer endorses the policy before any loss. Write to your insurer when the tenant leaves, not after a break-in.
- Loan interest, if the factory is financed.
- Upkeep and security: grass, drains, lights and someone who checks the unit regularly.
- TNB and water accounts. Decide whether to keep them open. A tenant who needs power on the day they move in will ask whether the supply is live.
On income tax, Public Ruling No. 12/2018 draws three lines. Expenses for a period the property is not let are not allowable, unless that period comes after an earlier tenancy and the property is clearly ready to be let again (paragraph 8.4.1). Assessment, quit rent, loan interest, fire insurance and ordinary repairs are among the direct expenses it lists, and so is the cost of renewing a tenancy or changing tenant (paragraph 8.2). The cost of finding the very first tenant, such as advertising, the legal cost of the agreement, stamp duty and agent's commission, is not deductible (paragraph 8.3). Ask your tax agent how this applies to your own accounts.
Can I get cukai pintu back while the factory is empty?
Section 162 of the Act says that where a building is unoccupied and no rent is payable for at least one calendar month in a half year for which rates have been paid, the council may refund or remit a part of the rate in proportion to the time it stood empty. A building here includes floor space of not less than 1,000 sq ft on one floor that may be let as a factory or godown. The owner must:
- give the council written notice of the vacancy within seven days of the start of the period claimed;
- claim a refund in writing no later than one month after the half year ends; and
- prove that the building is in good repair and fit for occupation, that every reasonable effort to obtain a tenant has been made, that the rent demanded is reasonable, and that the building stood empty for the whole period.
MBSA sets out how it applies this in Shah Alam in its remission conditions dated 1 April 2018:
| Step | MBSA condition |
|---|---|
| Notice | A complete remission form within 7 days of the vacancy starting, on or before the 7th of the month; a late form counts from the following month |
| Application windows | Penggal 1 (January to June): 1 January to 7 June. Penggal 2 (July to December): 1 July to 7 December |
| Claim letter | In July for Penggal 1, in January of the next year for Penggal 2 |
| Evidence | Copies of advertisements or an agent's letter, plus proof of good condition, a reasonable rent and the vacancy |
| Limit | Remission already approved for more than 3 years (6 penggal) in a row, counted from Penggal 1/2015, is not considered |
| Payment | The assessment must be paid first |
Rawang falls under MPS, whose area covers Mukim Rawang, while Serendah, Bukit Beruntung and Batang Kali fall under MPHS. Both councils work under the same section of the Act. I did not find a published remission form on either council's website, so send a dated letter to the council's valuation department within seven days of the tenant leaving, keep the acknowledgement, and ask what evidence it wants. This is also where the registered rent table earns its place: it is plain evidence that the rent you are asking is a reasonable one.
How do I market the factory so the right tenant finds it?
- One page of facts: land and built-up area, factory type, CCC or CF, power supply in amps and the TNB tariff, ceiling height, floor, loading bay and truck access, office and toilets, fire equipment, council, the date it is free, asking rent and deposit.
- Daylight photos and a floor plan, plus a short video of the drive from the main road to the gate.
- Keys and a person who can open the unit at short notice.
- A dated record of every advertisement, agent appointment, viewing and offer. It is the evidence section 162 and MBSA ask for, and it shows you whether the rent is what stops tenants.
- Agent fees, if you appoint one. BOVAEP's scale of fees caps a letting fee at 1.25 months' gross rent for a tenancy of up to 3 years, 1.50 months for more than 3 and up to 4 years, and 1.75 months beyond 4 years, with a minimum of one month's rent and 0.25 month more for each additional year when a term over five years carries a renewal option. Advertisements, signboards and brochures can only be charged with the owner's prior agreement.
- Screen the tenant before you sign, as in my tenant screening guide.
To see what your unit is compared with, look at the factories offered for rent in Rawang, Serendah and Shah Alam.
If your factory in Rawang, Serendah, Kundang, Bukit Beruntung or Shah Alam has been empty for a while, WhatsApp Jason Low (Probationary Estate Agent PEA 1478, CID Realtors Sdn Bhd E(1) 1855) on +60 12-288 1834 with the address and the rent you are asking.
Also answered on this site: Can I get my cukai pintu back while my factory is empty?
Questions people ask
01How do I know if my factory's asking rent is too high?+
Compare it per sq ft with JPPH-registered rents for the same factory type in the same area, not with other owners' asking rents. In Serendah, for example, the typical registered range is RM0.70 to RM1.10 psf a month, so an asking rent well above RM1.10 needs a clear reason such as more power or better truck access. If the unit has been empty longer than the premium can pay for, the rent is the likely problem.
02Is my fire insurance still valid if the factory is empty?+
Check your policy before 30 days pass. Standard Malaysian fire policy wordings, such as RHB Insurance's Condition 9, say the insurance ceases to attach if the building stays unoccupied for more than 30 days unless the insurer endorses the policy before any loss. Write to the insurer as soon as the tenant leaves.
03Should I renovate my factory before looking for a tenant?+
Repair, yes: leaks, shutters, power, fire equipment and cleaning should be done before the first viewing. Larger works such as offices, mezzanines and power upgrades are better done for a tenant who has signed, because they should follow that tenant's layout and they need council permits. Section 161 of the Act requires notice to the council within 15 days after the works.
04Can I claim holding costs against tax while the factory is vacant?+
LHDN's Public Ruling No. 12/2018 allows expenses for an empty period that comes after an earlier tenancy, provided the factory is clearly ready to be let. A break for repairs, or up to two years without a tenant after a tenancy ends, also keeps expenses allowable if the property is kept in good condition. The cost of finding the very first tenant is not deductible.
05How much can an agent charge to find a factory tenant?+
BOVAEP's scale of fees caps a letting fee at 1.25 months' gross rent for a tenancy of up to 3 years, 1.50 months for more than 3 and up to 4 years, and 1.75 months beyond 4 years, with a minimum of one month's rent. Advertising, signboards and brochures can only be charged with the owner's prior agreement.
Sources
- Local Government Act 1976 (Act 171), sections 2, 146, 161 and 162 (DBKL copy)
- Majlis Bandaraya Shah Alam: Syarat-syarat permohonan pulangan balik cukai taksiran (remisi), 1 April 2018
- Majlis Perbandaran Selayang: Soalan lazim cukai taksiran (rates and owner liability)
- Majlis Perbandaran Selayang: Kawasan pentadbiran (Mukim Rawang)
- Majlis Perbandaran Hulu Selangor: Latar belakang (Mukim Serendah, Batang Kali, Bukit Beruntung)
- LHDN: Public Ruling No. 12/2018, Income From Letting of Real Property, paragraphs 8.2 to 8.4
- RHB Insurance: Fire insurance policy wording, Condition 9 (change in risk)
- LPEPH (BOVAEP): Scale of fees, estate agency lettings
- FactoryHub: Rawang and Kundang industrial transactions (JPPH-registered)
- FactoryHub: Serendah industrial transactions (JPPH-registered)
- FactoryHub: Shah Alam industrial transactions (JPPH-registered)
Units on the market nearby
Semi-D Factory for Rent in Saujana Teknologi Rawang, Rawang, 6,525 sq ft
RM 10,500/month
Semi-Detached Factory for Sale or Rent in Saujana Rawang, Rawang, 8,000 sq ft
RM 4,000,000 · RM 15,000/month
Detached Factory for Rent in Batu 17 Rawang, 9,000 sq ft
RM 21,000/month
More on selling or letting your factory
- How Much RPGT on a Factory Sale in Rawang, Serendah or Shah Alam? 2026 Rates, the Buyer's Retention and the Costs You Can Deduct
- Letting Your Factory in Rawang or Shah Alam: How to Screen a Tenant and Protect Yourself in the Lease
- Sell a Factory With a Tenant or Vacant in Rawang, Serendah or Shah Alam? Who Buys Each, How the Remaining Term Moves the Price, and Whether Renovation, Power or Solar Pays
- Property Agent Commission for Selling or Renting a Factory in Rawang, Serendah and Shah Alam: BOVAEP Caps, Who Pays, 8% Service Tax and the Seller's Legal Fees