Rent or Buy a Factory in Malaysia? Rent vs Loan Instalment, Cash Tied Up, Tax and the Break-Even Point in Rawang, Serendah and Shah Alam
Compare yearly cost, not rent with instalment. Buying wins when the landlord's gross yield is clearly above your cost of money, you stay 7 to 10 years or more and have spare cash. In my RM10 million example, RM50,000 rent costs RM600,000 yearly; owning costs about RM518,000 yearly over 10 years before outgoings, but more over 3 years.
Key Takeaways
- Compare yearly cost, not rent with instalment. An instalment is part interest and part loan principal, and the principal stays with you as equity. What buying really costs each year is the interest, the return your own cash gives up, the buying costs spread over the years you stay, and the outgoings a landlord used to carry.
- RM50,000 a month is roughly the instalment on a RM10.7 million to RM11.8 million factory bought with an 80% loan over 25 years at 5% to 4% a year. On a RM10 million factory the cash you put in on the day is up to about RM2.62 million.
- Buying starts to make sense when the landlord's gross yield (yearly rent divided by the price) is clearly above your cost of money, you expect to stay 7 to 10 years or more, and the cash is not needed for machines or stock. In my worked example a 3-year stay makes renting cheaper even before outgoings.
- Tax treats both well, in different ways. Rent is deductible under section 33(1)(b) of the Income Tax Act 1967. An owner deducts loan interest under section 33(1)(a) and can claim industrial building allowance on the building, never on the land. Rent from a registered landlord carries 6% service tax from 1 January 2026; your own factory does not.
- A manufacturer arriving from China: I usually suggest renting first. A foreign-owned company needs Selangor land office consent under section 433B of the National Land Code to buy, banks look at track record, and the first factory is often the wrong size.
Rent or buy a factory: what am I really comparing?
When a client asks me whether to keep renting or to buy, the first thing I do is stop the comparison most people make: monthly rent against monthly instalment. They are different kinds of money. Rent is gone once it is paid. An instalment is partly interest, which is a cost, and partly principal, which lowers the loan and stays with you in the property.
So I put the two side by side as yearly costs:
| Renting costs you | Buying costs you |
|---|---|
| The rent, and any increase at each renewal | Loan interest, which falls as the loan is paid down |
| Service tax on the rent if the landlord is registered | The return your deposit would have earned elsewhere |
| Your fit-out, which usually stays behind when you leave | Stamp duty, legal and valuation fees, spread over the years you stay |
| A move if the landlord does not renew | Quit rent, cukai pintu, building insurance and structural repairs |
| Any fall in value when you sell, and the lease years you use up |
Buying also gives you what renting never does: a property that may be worth more when you sell, and the freedom to change the building. I keep the end value out of the yearly figure, because nobody can promise it, and look at it separately below. Who pays the outgoings during a tenancy is set out in my guide on repairs and outgoings in a rented factory; when you buy, all of them move to you.
I pay RM50,000 rent a month. Should I buy?
This is the worked example I take clients through. The inputs are assumptions for illustration: replace them with your own bank offer and the seller's bills.
- Rent: RM50,000 a month, RM600,000 a year. If the landlord is registered for service tax and you are not exempt, add 6%, which is RM3,000 a month.
- Price: RM10 million, either the landlord's price for your unit or a comparable factory.
- Loan: 80%, so RM8 million, over 25 years. The 4.5% rate is my assumption. Banks price business property loans off their own base rate or base lending rate; Maybank's base rate is 2.75% and its BLR 6.40% since 11 July 2025, and Bank Negara kept the OPR at 2.75% on 5 November 2026. You can compare bank packages on FactoryHub's commercial loan rates page.
The monthly cash flow
The instalment on RM8 million over 25 years is RM42,227 at 4%, RM44,467 at 4.5% and RM46,767 at 5%. Turned around, RM50,000 a month services a loan of about RM9.47 million at 4% or RM8.55 million at 5%. With a 20% deposit, that is a factory of about RM11.8 million or RM10.7 million. On cash flow alone, then, a RM50,000 tenant can carry a RM10 million purchase.
The cash on the day
| Item on a RM10 million purchase | Amount |
|---|---|
| Part of the price not financed (20%) | RM2,000,000 |
| Stamp duty on the transfer | RM384,000 |
| Stamp duty on the RM8 million loan (0.5%) | RM40,000 |
| Legal fee on the sale and transfer (scale fee) | up to RM101,250 |
| Legal fee on the loan and charge (scale fee) | up to RM81,250 |
| 8% service tax on the two legal fees | up to RM14,600 |
| Total before valuation fee and disbursements | up to about RM2.62 million |
The transfer duty follows item 32(a) of the Stamp Act 1949: 1% on the first RM100,000, 2% to RM500,000, 3% to RM1 million and 4% above. The loan duty is RM5 per RM1,000 under item 27(a), with a lower scale on the first RM1 million for a small or medium enterprise. Both legal fees follow the Solicitors' Remuneration Order 2023: 1.25% on the first RM500,000, 1% on the next RM7 million, and a negotiated fee of no more than 1% above RM7.5 million, so the figures above are ceilings. Professional services carry service tax at 8%. My stamp duty guide covers the duty in detail, and FactoryHub's legal fees and stamp duty calculator does the arithmetic for any price.
The yearly cost, first year
At 4.5%, first-year interest on the RM8 million loan is RM356,374; the other RM177,225 of the year's instalments repays principal, which is yours. If the RM2 million deposit would otherwise earn 5% a year, buying gives up RM100,000 a year. The RM621,100 of duty, fees and tax is spent once, so I spread it over the years you expect to stay.
| How long you stay | Owning, first-year cost before outgoings | Renting, with 6% service tax | Renting, no service tax |
|---|---|---|---|
| 3 years | RM663,407 | RM636,000 | RM600,000 |
| 5 years | RM580,594 | RM636,000 | RM600,000 |
| 10 years | RM518,484 | RM636,000 | RM600,000 |
Over 10 years, owning leaves RM81,516 to RM117,516 a year to pay quit rent, cukai pintu, insurance and structural repairs before it costs more than renting. Over 3 years, renting is cheaper before a single outgoing is paid. And if the RM2 million would earn 10% in your own business rather than 5%, add another RM100,000 a year to the owning column: at 10 years the gap almost closes.
So my answer to "I pay RM50,000 a month, should I buy?" is: yes, if the price of the space is around RM10 million or lower, you will stay ten years or more and the RM2.6 million is spare. No, if you may move within three to five years or the same cash would buy machines that earn more.
At what point does buying a factory start to make sense?
I use a four-line test with every client:
- Gross yield = yearly rent ÷ price. In the example, RM600,000 ÷ RM10 million = 6%.
- Cost of money = loan share × loan rate + own share × what your cash earns. In the example, 80% × 4.5% + 20% × 5% = 4.6%.
- Buying costs per year = about 6.2% of the price (stamp duty, legal fees, tax) ÷ years you stay: 0.62% over 10 years, 1.24% over 5, 2.07% over 3.
- Outgoings as a share of the price, from the seller's actual quit rent, cukai pintu and insurance bills.
Buying is cheaper each year when line 1 is larger than lines 2, 3 and 4 added together. In the example: 6% against 4.6% plus 0.62% plus outgoings over ten years.
The registered records show why the answer differs by area. Dividing the JPPH-registered median monthly rent by the median price of the same factory type gives a rough gross yield. It is rough because the median unit rented and the median unit sold are not the same building:
| Factory type and area | Median rent | Median price | Rough gross yield |
|---|---|---|---|
| Semi-detached, Shah Alam | RM17,300 a month | RM5.92 million | about 3.5% |
| Terrace, Shah Alam | RM4,400 a month | RM1.13 million | about 4.7% |
| Terrace, Rawang and Kundang | RM2,600 a month | RM670,000 | about 4.7% |
| Terrace, Serendah | RM1,500 a month | RM245,000 | about 7.3% |
The figures come from JPPH-registered transactions aggregated by FactoryHub, 24 months to August 2026. Against a cost of money near 4.6%, these medians say a Shah Alam semi-detached tenant pays less by renting, a terrace factory in Shah Alam, Rawang or Kundang is close to even, and a Serendah terrace buyer who stays long enough comes out ahead. My rental yield guide shows the full method.
How are rent and owning treated for tax?
Rent. Section 33(1)(b) of the Income Tax Act 1967 allows rent for land or buildings occupied to produce income. RM600,000 of rent is RM600,000 of deduction.
Owning. Section 33(1)(a) allows interest on money borrowed for assets used to produce income. Loan principal is not an expense. The building, but not the land, earns industrial building allowance: under LHDN Public Ruling 3/2018, the general rates are a 10% initial allowance and a 3% annual allowance on the qualifying building expenditure. For a purchased building that is the price of the building plus the legal fees and stamp duty that relate to it, never the land. If the sale agreement does not split land and building, the ruling asks for a valuation from JPPH or a registered valuer. Certain buildings, such as some warehouses, qualify only when the owner also runs the business in them, so ask your tax agent before you count on it.
In my example, if a valuer puts RM4 million of the RM10 million on the building, the allowance is RM520,000 in the first year and RM120,000 a year after. At the 24% company rate that is worth RM124,800 and then RM28,800 a year; an SME paying 15% and 17% on its first RM600,000 of income gains less.
Service tax. Rental services are taxed at 6% from 1 January 2026. A tenant that is an MSME with annual sales up to RM1.5 million is exempt, a newly started MSME is exempt for its first year, and only landlords whose rental sales pass RM1 million a year must charge it. On RM50,000 a month the tax is RM36,000 a year, which an owner-occupier never pays. Details are in my SST on factory rental guide. When you sell, gains tax applies; see my RPGT guide.
Which keeps me more flexible, and which lets me expand?
Renting. The registered tenancies in my areas have a typical term of 24 months in Rawang and Kundang and in Shah Alam, and 21 months in Serendah. That is flexibility both ways: you can move up a size at renewal, and the landlord can raise the rent or decline to renew. A term longer than three years has to be registered as a lease; my lease term guide covers 2+1 against 3+3.
Owning. You can add a mezzanine, raise power or extend into spare land, but each change needs the council's approval: MPS for Rawang, MPHS for Serendah, Bukit Beruntung and Batang Kali, MBSA for Shah Alam. Check the plot's spare land and the approved plans before you buy, not after. The cost of flexibility for an owner is time: a leasehold transfer and charge need state consent, and selling takes months.
If you expect to double in size within five years, either buy with land to spare or rent now and buy or build later; my build or buy guide compares those routes.
Freehold purchase or renting in a modern park: which costs less in the long run?
Over 15 or 20 years, a freehold purchase has two built-in advantages. There is no lease clock running down, and loan interest falls every year while rent is reviewed at every renewal. Renting a newer unit in a managed park gives you something else: a recent building whose approvals, power and roof height are easier to check, without tying up capital.
Do not read a freehold premium straight off the registered prices. In Rawang and Kundang the freehold factory median is RM4.1 million (165 deals) against RM3.51 million leasehold (24 deals); in Shah Alam it is RM3.36 million freehold (136 deals) against RM5.92 million leasehold (22 deals). Those gaps mix location, size and type, not tenure alone. My freehold vs leasehold guide covers what tenure changes for a buyer.
Nor should a purchase rest on price growth. In the 12 months to August 2026, like-for-like industrial land in Rawang and Kundang rose 12% across 5 parks, while like-for-like semi-detached factory prices in Shah Alam fell 32% across 3 parks. For a long-term comparison I run the yearly table above for the whole period, then test the end value at the purchase price, 20% below it and 20% above it. If buying only wins in the third case, rent.
Rent or buy in Rawang, Serendah or Shah Alam: what do the records show?
The registered records point to quite different markets:
- Rawang and Kundang: 25 registered factory tenancies in 24 months against 189 factory and warehouse sales and 116 industrial land sales. Median rent RM1.39 psf a month. See my Rawang page.
- Serendah: 30 tenancies against 292 factory sales and 72 land sales. Median rent RM0.95 psf a month. See my Serendah page.
- Shah Alam: 119 tenancies against 156 factory sales and 6 land sales. Median rent RM1.71 psf a month. See my Shah Alam page.
The registered record does not hold every tenancy or sale, so treat these as a direction, not a count of the market. Up north the record is mostly sales, which suits a buyer who knows the size they need; a tenant there may have fewer units to choose from. Shah Alam has the deepest rental record of the three, which helps a tenant who wants choice. What each budget buys is in my guide on how much a factory costs in Selangor.
A manufacturer moving from China: rent or buy first?
I usually suggest renting first, for four reasons:
- Consent. A company incorporated here but owned by non-citizens needs PTG Selangor consent under section 433B of the National Land Code before a transfer. The fee is RM200 per title (RM1,000 on appeal) and the Director of Lands and Mines Selangor decides. The page gives no processing time, so ask your lawyer for a current estimate. A leasehold title also needs state consent for the transfer and the charge.
- Finance. Some banks want a trading record: Alliance Bank asks for at least 3 years in business. CIMB's business premises loan is open to non-resident controlled companies, with tenures up to 25 years. A new company should expect the bank to look hard at the parent.
- Licences. A manufacturer with shareholders' funds of RM2.5 million or more, or 75 or more full-time workers, needs a manufacturing licence through MIDA. Renting lets production start while the licence and the council's business licence run.
- Real needs. Power, labour, truck access and floor loading only become clear after a year of production, and it is easier to choose the right building, or the right plot to build on, once you know them.
When I help such a client rent, I ask for a term that covers the start-up, such as 3+3, the right to make the fit-out the line needs, and, where the landlord agrees, a right of first refusal or an option to buy at an agreed price, drafted by your lawyer. Buying first can still be right: when the parent has the cash, the product line is fixed, and the plant needs heavy power, cranes or effluent permits that a landlord will not allow.
What I ask before I give a rent or buy answer
- The rent, the review clause and how many years the tenancy really has left.
- The price of the unit, or the registered deals for the same type nearby.
- Your bank's offer: margin, tenure and rate.
- What your cash earns in your own business.
- How many years you expect to stay and how big you expect to be.
- Tenure and lease years left, the CCC and the approved plans, and the power supply.
With those six answers I can fill in the table above for your own unit instead of my example.
Is it worth buying a factory in Klang now? The same test applies, rent against instalment, cash and expansion, but on Klang prices. Ms Teh Seok Hoon (PEA 4006), the CID Realtors colleague who handles Klang, works it through on registered Klang prices in her rent or buy a factory in Klang example.
If you want me to run these numbers on a factory you rent or are looking at in Rawang, Serendah, Kundang, Bukit Beruntung or Shah Alam, WhatsApp Jason Low (Probationary Estate Agent PEA 1478, CID Realtors Sdn Bhd E(1) 1855) on +60 12-288 1834.
Questions people ask
01Is it better to rent or buy a factory in Malaysia?+
Neither is better in general, so compare the yearly cost of each. Buying wins when the landlord's gross yield (yearly rent divided by price) is clearly above your cost of money, you will stay 7 to 10 years or more, and the deposit is spare cash. Renting wins for a short stay, for a growing business that needs its cash for machines, or for a unit whose price is high against its rent, as Shah Alam semi-detached factories are on registered medians.
02I pay RM50,000 rent a month. Should I buy a factory instead?+
RM50,000 a month covers the instalment on a loan of about RM8.55 million to RM9.47 million over 25 years at 5% to 4%, which is a factory of about RM10.7 million to RM11.8 million with a 20% deposit. On a RM10 million purchase you need up to about RM2.62 million in cash on the day. In my worked example buying costs less each year than renting over a 10-year stay but more over 3 years, so the answer turns on how long you will stay and what the cash earns in your business.
03Freehold purchase or renting in a modern industrial park: which costs less in the long term?+
Over 15 to 20 years a freehold purchase has no lease running down, and its loan interest falls while rent is reviewed at every renewal, so it can come out cheaper if you stay and the price is reasonable against the rent. Renting in a newer managed park keeps your capital free and gives you a recent building whose approvals are easier to check. Test the purchase with the end value at the price, 20% lower and 20% higher; if buying only wins when the value rises, rent.
04We are a manufacturer moving from China. Should we rent or buy a factory first?+
I usually suggest renting first. A company owned by non-citizens needs PTG Selangor consent under section 433B of the National Land Code to buy (RM200 per title), some banks want three years of trading, and a MIDA manufacturing licence is needed at RM2.5 million of shareholders' funds or 75 full-time workers. Rent on a term that covers the start-up, ask for an option or a right of first refusal to buy, and decide once production shows your real power, labour and space needs.
05Can a company claim tax on a factory it buys, the way it deducts rent?+
Partly. Rent is deductible under section 33(1)(b) of the Income Tax Act 1967, while an owner deducts loan interest under section 33(1)(a) and claims industrial building allowance of 10% initially and 3% a year on the building only. Land gets no allowance and loan principal is not an expense. If the sale agreement does not split land and building, LHDN expects a valuation from JPPH or a professional valuer.
06How many years must I stay for buying a factory to beat renting?+
Stamp duty, legal fees and the service tax on those fees come to about 6.2% of the price in my RM10 million example, so a short stay carries a heavy share of them each year. In that example renting was cheaper over 3 years, buying was a little cheaper over 5 years before outgoings, and clearly cheaper over 10 years. Run the same test with your own rent, price and loan offer before deciding.
Sources
- FactoryHub: JPPH-registered industrial transactions and tenancies, Rawang and Kundang (24 months to August 2026)
- FactoryHub: JPPH-registered industrial transactions and tenancies, Serendah (24 months to August 2026)
- FactoryHub: JPPH-registered industrial transactions and tenancies, Shah Alam (24 months to August 2026)
- Bank Negara Malaysia: Monetary Policy Statement, 5 November 2026 (OPR kept at 2.75%)
- The Star (9 July 2025): Maybank cuts base rate to 2.75% and BLR to 6.40% from 11 July
- CIMB: Business Premises Loan (factories and warehouses, up to 25 years, open to non-resident controlled companies)
- Alliance Bank: Business Premises Financing (up to 95%, up to 25 years, at least 3 years in business)
- Stamp Act 1949, First Schedule items 27(a) and 32(a) (Invest Malaysia copy)
- Malaysian Bar Circular 185/2023: Solicitors' Remuneration Order 2023, First, Second and Third Schedules
- Royal Malaysian Customs (MySST): service tax rates, 8% from 1 March 2024, rental or leasing 6% from 1 January 2026
- Ministry of Finance: updated SST policy announced 5 January 2026 (rental 6%, MSME tenant exemption to RM1.5 million, new MSMEs one year)
- Ministry of Finance: revision to the expanded SST, rental threshold raised to RM1 million (June 2025)
- Income Tax Act 1967 (Act 53), section 33(1)(a) and (b) (LHDN copy)
- LHDN Public Ruling 3/2018: Qualifying expenditure and computation of industrial building allowances
- LHDN: Company tax rates (24%; SME 15% and 17%)
- PTG Selangor: Acquisition of property by foreign interests, section 433B National Land Code (fees and approving authority)
- MIDA: Approvals and licensing (manufacturing licence under the Industrial Co-ordination Act 1975)
Units on the market nearby
Semi-D Factory for Rent in Saujana Teknologi Rawang, Rawang, 6,525 sq ft
RM 10,500/month
Semi-Detached Factory for Sale or Rent in Saujana Rawang, Rawang, 8,000 sq ft
RM 4,000,000 · RM 15,000/month
Detached Factory for Rent in Batu 17 Rawang, 9,000 sq ft
RM 21,000/month
More on renting a factory or warehouse
- Who Pays for Repairs in a Rented Factory, Landlord or Tenant? Roof, Wiring, Drains and Outgoings in Rawang, Serendah and Shah Alam
- Can You Terminate a Factory Tenancy Agreement Early in Rawang, Serendah or Shah Alam? Compensation, Break Clauses, a Replacement Tenant and Your Deposit
- SST on Factory Rental in Rawang, Serendah and Shah Alam: Who Pays the 6%, Which Tenants Are Exempt and What the Invoice Must Show
- Factory Rental Price in Selangor by Size: What 10,000, 20,000, 50,000 or 100,000 sq ft Costs a Month in Shah Alam, Rawang and Serendah