How to Negotiate Factory Rent in Rawang, Serendah and Shah Alam: Rent-Free Fit-Out, Deposit, Yearly Increases and What to Get in Writing
Yes, factory rent can be negotiated: since the Control of Rent (Repeal) Act 1997, rent, deposit, rent-free fit-out period, renewal rent and outgoings are set by agreement. Negotiate from JPPH-registered rents (median RM1.39 psf/month in Rawang & Kundang, RM0.95 in Serendah, RM1.71 in Shah Alam) and put the review formula with a cap in the letter of offer.
Key Takeaways
- Yes, factory rent is negotiable. The Control of Rent (Repeal) Act 1997 ended rent control from 1 September 1997, with a transitional period that ran to 31 December 1999. No law today fixes a factory's rent, deposit or yearly increase: the tenancy agreement does.
- Negotiate from registered rents, not asking rents. JPPH-registered factory tenancies in the 24 months to August 2026 show a median of RM1.39 psf/month in Rawang & Kundang, RM0.95 psf/month in Serendah and RM1.71 psf/month in Shah Alam.
- Ask for a rent-free fit-out period and size it to the real work. Council permits for partitions and TNB supply work set the clock; TNB puts a 400V job at less than 3 months without a substation and 3 to 12 months with one.
- No law sets the yearly increase. Write the review as a fixed figure, a fixed step, a link to DOSM's consumer price index or a market review with a floor and a cap, never "to be agreed".
- The management fee is the owner's bill first. The parcel owner pays strata maintenance charges and the sinking fund, and the owner pays the assessment. A tenant pays only what the agreement passes on, so put the split in writing.
Can factory rent be negotiated in Rawang, Serendah and Shah Alam?
Yes. Rent control in Peninsular Malaysia ended when the Control of Rent (Repeal) Act 1997 repealed the Control of Rent Act 1966. The Act came into force on 1 September 1997 and its transitional period ended on 31 December 1999. Since then the rent of a factory, a warehouse or a piece of industrial land is whatever the owner and the tenant agree. The Star puts the wider position plainly: there is still no specific statute for landlord and tenant, and the Contracts Act 1950 is the main law for disputes over a tenancy agreement.
With no statutory rent, the evidence you bring matters more than any rule. I start every negotiation with registered rents, because they are what tenants actually signed and stamped, not what owners hope to get. These are the JPPH-registered factory tenancies in the 24 months to August 2026, as aggregated by FactoryHub:
| Area | Median rent | Typical range | By factory type |
|---|---|---|---|
| Rawang & Kundang (25 tenancies) | RM1.39 psf/month | RM0.91 to RM2.22 psf/month | Terrace RM1.06 psf/month (median RM2,600 for about 2,400 sq ft); detached RM2.53 psf/month (median RM12,500 for about 3,000 sq ft) |
| Serendah (30 tenancies) | RM0.95 psf/month | RM0.70 to RM1.10 psf/month | Terrace RM0.77 psf/month (median RM1,500 for about 2,000 sq ft); detached RM1.06 psf/month (median RM4,000 for about 4,160 sq ft) |
| Shah Alam (119 tenancies) | RM1.71 psf/month | RM1.28 to RM2.47 psf/month | Terrace RM1.79, semi-detached RM2.12, detached RM1.50 and stratified RM2.09 psf/month |
The deals behind each row are on FactoryHub's Rawang & Kundang, Serendah and Shah Alam transaction pages. They are the registered records available so far, not every tenancy signed, and some types rest on a handful of deals, so I compare a terrace factory with terrace factories and a detached factory with detached ones.
When an asking rent sits above the typical range for its type, I ask the owner what the unit offers that the registered deals did not: more power, a higher roof, a bigger yard, a CCC and Bomba certificate in order, or a shorter drive to the highway. If there is a good answer, the rent may be fair. If there is not, the registered range is the basis of the counter-offer. What is available now is on my pages for factory for rent in Rawang, Serendah and Shah Alam.
What can you negotiate besides the monthly rent?
The monthly figure is only one line of the deal. When it will not move, the other terms still can, and some are worth more over the term than a small cut. Worked on the registered median for a Shah Alam terrace factory, RM4,400 a month, a three-year tenancy carries RM158,400 of rent. Two rent-free months would take RM8,800 off that, about 5.6% of the total, while the monthly rent the owner shows a bank or a buyer stays the same. For the supply side of a negotiation, see my guide on whether there is a factory oversupply in these areas.
| Term | What to ask for | What to get in writing |
|---|---|---|
| Rent | A figure inside the registered range for the type | Rent per month, the start date, and whether service tax is added |
| Rent-free period | Enough months to finish the fit-out | When it starts, when it ends, and what is still payable during it |
| Deposit | Fewer months, or a bank guarantee for part of it | Months of security and utility deposit, refund days, top-up rules |
| Renewal | An option for a further term | The notice window, the conditions, and the renewal rent formula with a cap |
| Repairs before handover | Defects fixed by the owner before the keys | A dated list: roof, gutters, shutters, lighting, distribution board |
| Outgoings | Assessment, quit rent and any strata or park charge kept with the owner | Who pays each one, and what happens when it rises |
| Option to purchase | The right to buy the factory later | The price or price formula, and the window to exercise it |
The National Land Code allows the last one. Section 228 lets a tenancy give the tenant an option to require a further term or to purchase the reversion. The same section says an option in an oral tenancy cannot be enforced against someone who later buys the factory, which is one more reason everything in this table goes on paper. Who repairs what during the tenancy is a wider subject than the handover list; in a rent negotiation I keep to what the owner fixes before the keys and a cap on the tenant's own minor repairs.
Can I ask for a rent-free fit-out period, and how long should it be?
Yes. No law fixes its length, so I size it to the work the tenant must finish before production starts. In my areas, three things set the clock:
- Council permits. Rawang and Kundang fall under Majlis Perbandaran Selayang. Its internal partition permit checklist (JB-B07) asks for the owner's application letter, a tenancy agreement still in force, the CCC, the latest paid assessment bill and photos. The counter permit covers gypsum board partitions of up to three rooms; in a factory, partitions of other materials go through the One Stop Centre instead. Serendah, Bukit Beruntung and Batang Kali fall under Majlis Perbandaran Hulu Selangor, whose minor works checklist for non-residential buildings asks for the tenancy agreement, the CF or CCC and the latest assessment receipt, and warns that no work may start before approval. In Shah Alam, ask MBSA for its own list before you count the weeks.
- Power. TNB's Electricity Supply Application Handbook gives a typical supply project lead time of less than 3 months at 400V without a substation, 3 to 12 months at 400V with a substation and 6 to 12 months at 11kV, provided local authority approvals are not delayed. My guide on sizing factory power in kVA and amps shows how to tell early whether an upgrade is needed.
- The owner's own papers. Both councils ask for documents only the owner holds. If the rent-free period starts on the signing date, it can run out while the tenant is still waiting for the owner's letter.
So the clause I ask for has four parts: the number of months; a start date tied to handover of the keys and the owner's documents, not to signing; an extension if those documents or the agreed repairs are late; and a list of what is still payable during the period, such as the tenant's own utilities and insurance.
Two costs follow the rent figure. LHDN's stamp duty guideline charges a tenancy on the annual rent or the average annual rent, so ask the lawyer how rent-free months and any step-ups enter that figure. And rental services carry service tax at 6% from 1 January 2026 where the landlord is registered, so the offer should say whether the rent is before or after tax. My guide to factory rental deposits and move-in costs covers both in detail, and my guide to tenant renovations and reinstatement covers what the fit-out must look like when you leave.
How much does factory rent go up each year?
There is no legal figure. No statute caps a factory rent increase, and I have not found an official source that publishes a standard yearly percentage for industrial tenancies, so any number you hear is a starting position, not a rule. What matters is how the increase is written. The registered terms also show when it bites: the typical registered factory tenancy runs 24 months in Rawang & Kundang and in Shah Alam, and 21 months in Serendah, so for many tenants the real rent review is the renewal.
The four ways I see a review written, and what to ask for in each:
- Fixed for the term, reviewed at renewal. The simplest. Ask for the renewal formula now, while you still have something the owner wants.
- A fixed step. A stated amount or a stated percentage at each anniversary or renewal. Easy to budget; check whether the steps compound.
- Linked to inflation. Name the index, the month and the source. DOSM's consumer price index for September 2026 put Malaysia's inflation at 1.8%, with the index at 137.6 against 135.2 a year earlier, and Selangor at 1.9%. Ask for a floor and a cap so one unusual year does not reset the rent.
- A market review. The rent moves to the market rent for comparable factories, with a floor, a cap and a named way to settle a disagreement. Section 19 of Act 242 authorises a registered valuer to value land and buildings for arbitration and other purposes, so naming a registered valuer appointed by both sides gives the clause a way to finish.
The wording I steer clients away from is "rent at renewal to be mutually agreed": if the two sides cannot agree, the tenant has nothing to enforce. The term itself, the option window and the three-year registration line are in my guide on how long a factory lease should be.
Is the management fee paid by the owner or the tenant?
By law, the owner pays. What the tenant pays depends on the agreement.
- Strata factories and stratified parks. Shah Alam's registered data includes stratified factory tenancies (13 of them, at a median of RM2.09 psf/month), and those are the units where a maintenance charge appears. KPKT's Strata Management Handbook 2.0 says every strata scheme in Peninsular Malaysia falls under the Strata Management Act 2013, defines a developer as anyone developing land for residential, commercial or industrial use, and lists paying the maintenance charge and the sinking fund among the duties of the parcel buyer or owner. The sinking fund pays for capital items such as repainting common property, replacing fittings and upgrades. If the owner asks the tenant to pay the maintenance charge, I ask that the sinking fund stays with the owner and that the agreement says what happens when the management body raises the charge.
- Assessment (cukai pintu). Section 146 of the Local Government Act 1976 says rates are paid by the owners of the holdings. Section 155 adds that an occupier who pays a rate the owner owes may deduct it from the following rent payments, notwithstanding any agreement with the owner. The council rates are in my cukai pintu guide.
- Quit rent. Charged on the title by the land office; see my guide on quit rent for a factory in Selangor.
When outgoings move to the tenant, compare like with like: a rent that includes assessment, quit rent and the maintenance charge is a different number from a net rent with those bills on top. How fees differ between estate types is in my guide to managed industrial parks and older estates.
What should be in writing before you pay the booking deposit?
The letter of offer is where the negotiated terms get fixed, because it is signed, and the booking deposit paid, before the lawyer drafts the agreement. Before a client pays anything, I check that it states:
- The owner (the company, if the title is in a company name) and the tenant company.
- The unit, the floor area the rent is based on, and the start date.
- The rent, whether service tax is added, and the rent-free period with its start trigger.
- The security and utility deposits, how many days after handover they are refunded, and whether they are topped up when the rent rises.
- The term, every option, the notice window and the renewal or review formula with its floor and cap.
- Who pays assessment, quit rent and any maintenance charge, and what happens when one rises.
- The repairs the owner will finish before handover, with a date.
- The owner's papers for the permits: the owner's letter, the CCC or CF, a paid assessment bill and a copy of the title.
- The bank's written consent if the title is charged. Section 226 of the National Land Code says an owner whose land is charged cannot grant a tenancy without the chargee's consent, given in writing.
- That the booking deposit comes back in full if the owner withdraws or that consent is refused.
- Who pays the legal fees and the stamp duty.
The Star describes a security deposit as typically one to three months' rent, refunded less deductions for damage or unpaid rent, so the number of months is a term like any other. For the approvals, power and licences to check before any of this, see what to check before renting a factory in Rawang. I am an estate agent, not a lawyer: the agreement itself should be drafted or checked by one.
How do I run a rent negotiation for a client?
I keep it to one written round where I can. After the site visit, every point goes into a single counter-offer: the rent against the registered range for that type, the rent-free months tied to the permits and power the client needs, the deposit, the renewal formula, the outgoings and the repair list. The owner can answer the package as a whole, and the client can see which point matters most to the owner. Nothing agreed on the phone counts until it is in the letter of offer.
If you are negotiating a factory tenancy in Rawang, Serendah or Shah Alam, WhatsApp Jason Low, Probationary Estate Agent PEA 1478 with CID Realtors, on +60 12-288 1834.
Questions people ask
01Can factory rent be negotiated in Malaysia?+
Yes. Rent control was repealed by the Control of Rent (Repeal) Act 1997, so a factory's rent, deposit and increases are whatever the owner and tenant agree in the tenancy agreement. Registered rents for the same factory type in the same area are the strongest evidence for a counter-offer, for example a median of RM1.71 psf/month for JPPH-registered factory tenancies in Shah Alam.
02How much does factory rent go up each year?+
No law sets a figure, and there is no official standard percentage for factory tenancies. The increase is whatever the agreement says: a fixed step, a link to DOSM's consumer price index (1.8% for Malaysia in September 2026) or a market review with a floor and a cap. Registered factory tenancies in Rawang and Shah Alam typically run 24 months, so many tenants meet the increase at renewal.
03Can I ask the landlord for a rent-free fit-out period?+
Yes, and its length is negotiable. Size it to the council permits for partitions and any TNB supply work, which TNB puts at less than 3 months at 400V without a substation and 3 to 12 months with one. Tie the start to handover of the keys and the owner's documents, not to the signing date.
04Is the management fee paid by the owner or the tenant?+
The owner is liable: KPKT's strata handbook lists paying the maintenance charge and the sinking fund among the parcel owner's duties under the Strata Management Act 2013. A tenant pays only if the tenancy agreement passes the charge on, so write down who pays it. If the tenant takes the maintenance charge, ask that the sinking fund, which funds capital works, stays with the owner.
05Who pays cukai pintu when I rent a factory?+
Section 146 of the Local Government Act 1976 makes rates payable by the owner of the holding. If a tenant has to pay an assessment the owner owes, section 155 lets the tenant deduct it from the following rent payments, whatever the agreement says. Ask for proof that the assessment is paid before you sign.
06Can I negotiate the deposit for a factory?+
Yes. No law fixes the number of months, and The Star describes a security deposit as typically one to three months' rent. You can ask for fewer months, a bank guarantee for part of it, a fixed refund period after handover and a clear rule on whether it is topped up when the rent rises.
Sources
- Laws of Malaysia: Control of Rent (Repeal) Act 1997 (Act 572), sections 1, 2 and 5 (FAOLEX copy)
- FactoryHub: Rawang and Kundang industrial transaction prices and rents (JPPH-registered)
- FactoryHub: Serendah industrial transaction prices and rents (JPPH-registered)
- FactoryHub: Shah Alam industrial transaction prices and rents (JPPH-registered)
- The Star: Know your rights as a tenant (15 September 2024)
- National Land Code (Act 828), sections 226 and 228 (FAOLEX copy)
- Majlis Perbandaran Selayang: Senarai semak permohonan permit sekatan dalaman (JB-B07, kemaskini 07.07.2025)
- Majlis Perbandaran Hulu Selangor: Senarai semak permohonan permit kerja kecil bangunan selain kediaman
- TNB: Electricity Supply Application Handbook 3.1, section 1.3.5 supply project lead time
- LHDN: Garis panduan pengenaan duti setem bagi surat cara Jadual Pertama Akta Setem 1949 (Item 49, sewa/pajakan)
- Royal Malaysian Customs (MySST): Service tax background, rental or leasing services 6% from 1 January 2026
- DOSM: Consumer Price Index, Malaysia, September 2026 (media release, 19 October 2026)
- Laws of Malaysia: Valuers, Appraisers, Estate Agents and Property Managers Act 1981 (Act 242), section 19
- KPKT: Handbook Pengurusan Strata 2.0 (Akta Pengurusan Strata 2013)
- Local Government Act 1976 (Act 171), sections 146 and 155 (DBKL copy)
Units on the market nearby
Semi-D Factory for Rent in Saujana Teknologi Rawang, Rawang, 6,525 sq ft
RM 10,500/month
Semi-Detached Factory for Sale or Rent in Saujana Rawang, Rawang, 8,000 sq ft
RM 4,000,000 · RM 15,000/month
Detached Factory for Rent in Batu 17 Rawang, 9,000 sq ft
RM 21,000/month
More on renting a factory or warehouse
- What to Check Before Renting a Factory in Rawang: Approvals, Power, Licences and Rent
- Rent or Buy a Factory in Malaysia? Rent vs Loan Instalment, Cash Tied Up, Tax and the Break-Even Point in Rawang, Serendah and Shah Alam
- Who Pays for Repairs in a Rented Factory, Landlord or Tenant? Roof, Wiring, Drains and Outgoings in Rawang, Serendah and Shah Alam
- Can You Terminate a Factory Tenancy Agreement Early in Rawang, Serendah or Shah Alam? Compensation, Break Clauses, a Replacement Tenant and Your Deposit