Buying a Tenanted Factory in Rawang, Serendah or Shah Alam: Vacant Possession or Sitting Tenant, and What I Check
A factory in Rawang, Serendah or Shah Alam is sold with vacant possession or subject to tenancy. A registered lease over three years binds you; one of three years or less, only if endorsed on the title before transfer or taken over in your sale agreement. Check title search, stamped agreement, deposits and expiry date before you offer.
Key Takeaways
- There are two ways a factory is sold. It is sold either with vacant possession, meaning the seller hands it over empty on completion, or subject to the existing tenancy, meaning you become the landlord on completion. The sale and purchase agreement (SPA) has to say which one, in plain words.
- Most factory tenancies here are short, so they are not on the title. JPPH-registered factory tenancies typically run 24 months in Rawang and Kundang and in Shah Alam, and 21 months in Serendah. Under the National Land Code a tenancy of three years or less is exempt from registration, so it only shows on the title if the tenant has had it endorsed.
- Whether it binds you depends on what the title shows and what you sign. A registered lease binds the buyer. A short tenancy binds the buyer by law only if it was endorsed before the transfer takes effect (section 213(3)), but if your SPA sells the factory subject to it, you have agreed to take it over.
- You cannot lock a tenant out. Section 7(2) of the Specific Relief Act 1950 says an occupier who stays on after a tenancy ends can only be removed through court proceedings.
- The deposit has to move with the tenancy. When land is transferred subject to a tenancy, section 216 of the Code makes its terms enforceable against the new owner, refund of the deposit included, so the deposit money should come across at completion.
Vacant possession or subject to tenancy: what is the difference?
Vacant possession means the factory is delivered empty: no tenant, no tenant's machines or stock, and the keys handed to you on completion. A sale subject to tenancy means the tenant stays, keeps paying rent, and from completion pays it to you.
When an owner in Rawang, Serendah or Shah Alam asks me to market a factory that has a tenant inside, my first question is which of the two they are selling, because it decides who the buyer is:
- A buyer who will run their own plant needs vacant possession, and needs it by a date. For them the tenancy expiry date matters more than the rent.
- A buyer who wants rental income wants the tenant to stay. For them the rent, the time left on the term, the tenant's payment record and the deposit matter more than the move-out date.
The same factory can suit either buyer, but not on the same paperwork. If the SPA is silent or vague, the argument starts on completion day, which is the most expensive day to have it. Owners deciding which way to sell can read my guide to selling a factory tenanted or vacant.
Will the existing tenancy bind me after I buy?
The National Land Code 1965 (revised as Act 828) splits the tenant's position into two kinds of interest, and the answer is different for each.
| What the tenant holds | Where it shows | Does it bind the buyer? |
|---|---|---|
| Lease of more than three years, granted in Form 15A (section 221) | Registered on the title | Yes. Under section 215(3)(a) the buyer holds the land subject to any lease registered when the transfer is registered |
| Tenancy of three years or less, endorsed "Exempt tenancy claimed" | Endorsement on the title (sections 316 and 317) | Yes, if the endorsement was made before your transfer takes effect (section 213(3)) |
| Written tenancy of three years or less, not endorsed | Not on the title | Not by force of the Code (section 213(3)). If your SPA sells subject to it, you have agreed to take it over |
| Oral or month-to-month tenancy | Not on the title | As above. An option to renew in an oral tenancy is not enforceable against a buyer (section 228(2)) |
Two details in the Code catch people out.
A "3+3" is still a short tenancy. Section 224(b) says that when the term is a fixed period, an option to renew is ignored in deciding whether it exceeds three years. So a three-year term with a three-year option is a tenancy exempt from registration, not a lease. A month-to-month tenancy is measured by its shortest possible length under section 224(a). Since registered factory tenancies in my areas typically run around two years, most tenancies a buyer meets here fall in the short, unregistered group.
An endorsement protects the tenant but does not prove the tenancy. Under section 317(5) the Registrar does not check whether the claim is valid when endorsing it. An endorsement tells you to read the agreement; it does not tell you what the agreement says.
If a seller shows me a written lease of more than three years that was never registered, I stop and ask the buyer's lawyer how it should be treated before anyone signs an offer. It is not on the title, and it is not a short tenancy either.
When a sale is agreed subject to tenancy, I treat the tenancy as the buyer's from completion, whatever its status on the title, because that is what was bargained for and priced.
What I check on the title before an offer
I ask the buyer's lawyer, or the buyer, to pull an official search (carian rasmi) through Selangor's e-Tanah system before the offer is signed. Selangor's e-Tanah guide says an official search takes one working day to process, and the search certificate can only be printed for three days from the approval date, so I ask for it when we are close to an offer, not weeks before.
On the search I look for:
- A registered lease. If there is one, I want the lease instrument, not just the seller's summary.
- An "Exempt tenancy claimed" endorsement. If there is one, the tenant has protected itself, and the tenancy will bind the buyer.
- A charge to the seller's bank. Section 226 says a proprietor of charged land is not capable of granting a tenancy without the chargee's consent, given in writing. I ask whether the bank's consent letter exists.
- A restriction in interest. Section 225(1)(b) makes the power to lease or let subject to any restriction in interest on the title. If the title restricts leasing without State consent, I ask whether that consent was obtained.
- The registered proprietor's name. The landlord named in the tenancy agreement should be the registered owner. If the tenancy was signed by a director personally, a previous owner or a related company, I want to know why.
What I read in the tenancy agreement
I ask for the full signed agreement with its stamp certificate, every renewal letter and any side letter. Then I go through it with the buyer, clause by clause, looking for these:
- Who the tenant is. The company name and SSM number should match the business on site. If someone else is operating inside, there may be a subtenant; my subletting guide covers what that means for consent and the council.
- Term, expiry and options. Section 228(1) allows a tenancy to give the tenant an option to renew, or an option to buy the reversion, which is the factory itself. An option to purchase in a tenancy you are taking over needs a lawyer's view before you commit.
- Rent, rent review and who pays what. Who pays cukai pintu, quit rent, building insurance and repairs. My cukai pintu guide explains how the bill is set by MPS, MPHS and MBSA.
- Deposits. The security deposit and utility deposit stated in the agreement, matched against receipts.
- Permitted use and licences. The tenant's use should match the approved use of the building and its council licence. In Shah Alam, MBSA's composite licence checklist (amended August 2025) asks for the latest tenancy agreement or SPA stamped by LHDN, the latest MBSA assessment bill and the CF or Form F, so a tenant with a current licence has usually shown the council these papers. In Rawang and Kundang (MPS) and in Serendah, Bukit Beruntung and Batang Kali (MPHS), I ask to see the tenant's current licence as well.
- Alterations and reinstatement. What the tenant built, whether it was approved, and what has to be removed at the end. My reinstatement guide covers how that is usually written.
- A sale clause. Some agreements let the landlord end the tenancy on a sale with notice; others say the tenancy continues. This one clause decides whether vacant possession is even possible before the expiry date.
- Stamping. Section 52 of the Stamp Act 1949 says an instrument chargeable with duty is not admitted in evidence unless duly stamped, although it can be admitted on payment of the duty and any penalty. LHDN puts it simply: an instrument that has not been properly stamped cannot be used as evidence in court. An unstamped tenancy is a tenancy you would struggle to enforce. The stamp duty guide covers the duty on the purchase itself.
Deposits, rent and bills on completion
Section 216(1)(a) of the Code says that when land is transferred subject to a lease or a tenancy exempt from registration, every provision of it is enforceable by or against the new owner as if he were a party. Section 216(2) adds an implied promise by the buyer to perform those provisions and to indemnify the seller against claims after the transfer. The refund clause for the deposit is one of those provisions, so the obligation to refund lands on you.
So, for a sale subject to tenancy, I ask the buyer's lawyer to cover these in the SPA:
- the deposits are paid over to the buyer, or credited against the balance price, on completion
- rent is apportioned to the completion date, and any arrears before that stay between seller and tenant
- cukai pintu and quit rent are apportioned in the same way
- the seller warrants that the agreement shown is the whole agreement, with no side letters or rent waivers
- a joint letter from seller and buyer tells the tenant where to pay rent from completion
I also note the meter readings and who holds the TNB and water accounts on the day, because a tenant's account in the tenant's name is normal and should stay that way.
Loan and valuation for a tenanted factory
The bank lends against the valuer's report, so I make sure the valuer sees the real position:
- Tell the banker at the start that the factory is tenanted, and whether you will occupy it or hold it for rent. Those are two different stories, and the loan application should tell the one that is true.
- Send the stamped tenancy agreement and the rent record with the valuation request.
- Check the access clause in the tenancy. The valuer needs to get inside, and the tenant only has to let people in on the terms the agreement sets.
- If you are buying through a company to collect the rent, read my company name or personal name guide before the offer, because the name on the SPA drives the loan, the stamp duty and how the rent is taxed.
If I need the factory empty, how does vacant possession happen?
On a vacant possession sale, getting the tenant out is the seller's job. The seller has to end the tenancy on its own terms, by expiry or by notice if the agreement allows it, or get the tenant to sign a surrender before completion. The deposit refund and the reinstatement works stay between the seller and the tenant.
What I do for a buyer who needs the factory for their own plant:
- line up the completion date with the tenancy expiry, or with the notice period in the agreement
- ask for the tenant's written move-out date or a signed surrender before the buyer commits to the purchase price
- ask the lawyer to tie completion, or part of the balance, to delivery of vacant possession
- walk the unit on handover day: empty floor, keys and access cards, meter readings, no machines, stock or waste left behind
The risk to plan around is a tenant who does not leave. Section 7(2) of the Specific Relief Act 1950 says that once a tenancy has ended, the person entitled to possession cannot recover it from an occupier who stays on otherwise than by proceedings in court. Changing the locks or removing the tenant's goods is not an option, for the seller or for you. That is why I want the tenant's move-out confirmed in writing before the buyer is locked in, and why my relocation timeline guide assumes some overlap.
When is a tenanted factory worth buying in Rawang, Serendah or Shah Alam?
I start by putting the passing rent next to registered rents. These are JPPH-registered factory tenancies over 24 months to August 2026, per sq ft of rented floor area per month:
| Area | Registered factory tenancies | Median rent | Typical range | Typical term |
|---|---|---|---|---|
| Rawang and Kundang | 25 | RM1.39 psf/month | RM0.91 to RM2.22 psf/month | 24 months |
| Serendah | 30 | RM0.95 psf/month | RM0.70 to RM1.10 psf/month | 21 months |
| Shah Alam | 119 | RM1.71 psf/month | RM1.28 to RM2.47 psf/month | 24 months |
These are the registered records available so far, not every tenancy in each area. In Shah Alam the registered median for semi-detached factories is RM2.12 psf/month and for terrace factories RM1.79 psf/month, so I compare within the same factory type. To turn that rent into a return, see how I calculate factory rental yield.
A tenanted factory makes sense to me for a buyer when:
- the rent sits inside the registered range for that type, and the tenant has paid on time (I ask for the bank statements, not a summary)
- the tenant's use fits the building's approvals, licences and power, so nothing is waiting to go wrong at the council or with Bomba
- the agreement is stamped, the deposits are intact and will come across, and there is enough term left, or renewal on clear terms
- the building would let again without major work if this tenant left
I slow down when:
- the rent is well above the registered range, because the price may be leaning on it
- the tenant is the seller's own or related company, a sale and leaseback where the seller set the rent
- the tenancy is oral or unstamped, or the tenant holds an option to purchase
- there are occupiers inside who are not in the agreement, or extensions that were never approved; my unapproved extension guide explains why that matters to a buyer
For an owner-occupier, a tenanted factory is worth it only when the expiry date, or a signed surrender, fits the date you need to move. If it does not, I would rather keep looking at factories for sale in Rawang and Shah Alam that are already empty.
If you are looking at a factory with a sitting tenant in Rawang, Serendah or Shah Alam, WhatsApp Jason Low on +60 12-288 1834.
Investing in a factory with a long lease or an MNC tenant
Is it safe to invest in a factory with a long-term lease in Rawang or Shah Alam?
It is safer than a short tenancy, but only when the lease is registered on the title. Once a lease of more than three years granted in Form 15A is registered, section 215(3)(a) of the National Land Code makes it bind you as the buyer. Before you offer, check the official search through Selangor e-Tanah, the stamped lease, the deposits and the rent record.
Is a factory with an MNC tenant worth investing in in Shah Alam or Rawang?
It can be, as long as the rent falls inside the registered range for that type of factory and the tenant's use fits the building's approvals and council licence. In Shah Alam, MBSA's composite licence checklist asks for the stamped tenancy agreement, the latest assessment bill and the CF or Form F. For the rent record, ask for bank statements rather than a summary.
What risks should I watch before investing in a factory with a long-term MNC tenant in northern Selangor?
Look at how the rent compares with registered records, how much of the term is left, and whether the tenancy is stamped and endorsed. Under section 213(3), a tenancy of three years or less binds you by law only if it was endorsed before your transfer, but an SPA that sells subject to the tenancy means you take it over anyway. Also read the sale clause, check how the deposits will be handled and look for any option to purchase.
Also answered on this site: Does a 3+3 factory tenancy need to be registered?
Questions people ask
01What does vacant possession mean when buying a factory?+
It means the seller hands the factory over empty on completion: no tenant, no tenant's machines or stock, and the keys go to you. The SPA should say the sale is with vacant possession and, ideally, tie completion or part of the balance price to it. If the factory is tenanted, the seller has to end the tenancy on its terms or get a signed surrender before completion.
02Is a tenancy binding on the new owner of a factory in Malaysia?+
A registered lease of more than three years binds the buyer under section 215(3)(a) of the National Land Code. A tenancy of three years or less binds the buyer by law only if it was endorsed on the title before the transfer takes effect, under section 213(3). If the SPA sells the factory subject to the tenancy, the buyer has agreed to take it over anyway.
03Can I evict the tenant after I buy a tenanted factory?+
Only on the terms of the tenancy, and only through the court if the tenant will not leave. Section 7(2) of the Specific Relief Act 1950 says an occupier who stays on after a tenancy ends can be removed only by court proceedings. Changing the locks or removing the tenant's goods is not allowed.
04Who refunds the tenant's deposit when a factory is sold?+
When the land is transferred subject to the tenancy, section 216 of the National Land Code makes its terms enforceable against the new owner, so the refund becomes the buyer's obligation. The SPA should have the seller pay the deposits over to the buyer, or credit them against the balance price, on completion.
05How do I check whether a factory in Selangor has a registered lease or an endorsed tenancy?+
Order an official search (carian rasmi) through Selangor's e-Tanah system. It takes one working day to process, and the certificate can be printed for three days from approval. Look for a registered lease, an "Exempt tenancy claimed" endorsement, any charge to a bank and any restriction in interest.
Sources
- Laws of Malaysia: National Land Code (Act 828, Revised 2020), sections 213, 215, 216, 221, 223 to 228, 316 and 317 (FAOLEX copy of the official revised text)
- Laws of Malaysia: Specific Relief Act 1950 (Act 137), section 7 (AGC reprint)
- Laws of Malaysia: Stamp Act 1949 (Act 378), section 52 (AGC reprint)
- LHDN (Inland Revenue Board): Adjudication of Instruments, stamp duty
- e-Tanah Selangor: Permohonan Carian Rasmi (official title search user guide)
- MBSA: Senarai Semak (Khusus) Bagi Permohonan Lesen Komposit, pindaan Ogos 2025
- FactoryHub: JPPH-registered industrial transactions and tenancies, Rawang and Kundang
- FactoryHub: JPPH-registered industrial transactions and tenancies, Serendah
- FactoryHub: JPPH-registered industrial transactions and tenancies, Shah Alam
Units on the market nearby
Semi-D Factory for Rent in Saujana Teknologi Rawang, Rawang, 6,525 sq ft
RM 10,500/month
Semi-Detached Factory for Sale or Rent in Saujana Rawang, Rawang, 8,000 sq ft
RM 4,000,000 · RM 15,000/month
Detached Factory for Rent in Batu 17 Rawang, 9,000 sq ft
RM 21,000/month
More on buying a factory or industrial land
- Buy Industrial Property Under a Company Name or Your Own Name? Loans, Stamp Duty, RPGT, Rent Tax and Resale in Rawang, Serendah and Shah Alam
- Cukai Pintu for a Factory in Rawang, Serendah and Shah Alam: How Much, Who Pays and What Buyers and Tenants Should Check
- Stamp Duty Malaysia 2026 for a Factory or Industrial Land: How It Is Calculated, With Rawang, Serendah and Shah Alam Examples
- Quit Rent in Selangor for a Factory or Industrial Land: How Much It Costs and What Buyers in Rawang, Serendah and Shah Alam Should Check