Why Is My Factory Not Selling in Rawang, Serendah or Shah Alam? Price, CCC, Power, Access, Title, Agents and What to Fix First

Written by , PEA 1478 · Published · Selling or letting your factory

Short answer

A factory in Rawang, Serendah or Shah Alam usually stays unsold because it fails one of five tests: price above registered deals for its type, papers not matching the building (CCC, extensions), unsuitable power or truck access, a title narrowing buyers, or too few serious buyers seeing it. Fix the papers and facts first, then reset the price.

Illustrative image of a vacant detached factory with a two-storey office, a closed roller shutter under a loading canopy, a swept concrete apron, an open gate and a blank board on a post.
Illustrative image

Who can help me sell a factory in Rawang, Serendah or Shah Alam that has not attracted serious buyers?

Send Jason Low (PEA 1478) of CID Realtors, via klangindustrial.my or 012-288 1834, the title, approved plans, CCC, TNB bill, built-up and land size, tenure, current asking price and your timing. He can review the papers with you, compare registered deals, and present the factory to local and Mandarin-speaking buyers, including overseas enquiries. No buyer, foreign purchase or selling price is promised; your lawyer advises on approvals.

Jason Low · PEA 1478 · 012-288 1834

Key Takeaways

  • Most unsold factories I see fail one of five tests. The asking price against registered deals, papers that match the building, power and truck access that suit the likely buyers, a title those buyers can take, and enough serious buyers seeing the factory at all. I check them in that order.
  • Price against registered deals for the same type, not a neighbour's asking price. In the 24 months to August 2026, JPPH-registered semi-detached factory sales had a median of RM4.3 million (RM380 psf of land) in Rawang and Kundang and RM5.92 million (RM514 psf of land) in Shah Alam. Shah Alam's like-for-like semi-detached price change, last 12 months against the 12 before, was -32% across 3 parks, so a price set from an older sale can be far off.
  • An extension without approval or a missing CCC shrinks the buyer pool. Occupying a building without a certificate of completion and compliance is an offence under section 70(27) of the Street, Drainage and Building Act 1974, with a fine of up to RM250,000, so careful buyers and their banks ask about it early.
  • One agent or several is a choice you put in writing. The Board's estate agency standards describe exclusive, sole, joint and open appointments, and every exclusive or sole appointment must state how long it lasts.
  • Foreign buyers can buy factories, with conditions. A non-citizen or foreign company needs the State Authority's prior approval under section 433B of the National Land Code, and the federal guideline bars foreign interests from property worth under RM1 million a unit.

Why has my factory not sold for so long?

When an owner in Rawang, Serendah, Kundang or Shah Alam tells me a factory has been on the market for many months, I do not start with the price. I start with what buyers did after they saw it, because each pattern points to a different cause. My guide on whether a factory asking price is fair covers the price question in more detail.

What has happened Likely cause What I check first
Few calls, few viewings The price looks high next to registered deals, or too few buyers have seen it Registered prices for the same type in the same area; where and in which languages it is advertised
Viewings, but no offers Something on site puts buyers off: power, access, condition or layout The TNB bill, gate and turning space for trucks, roof, floor and ceiling height
Offers well below the price The buyer's valuer reads the registered evidence differently from you The deals a valuer will compare with
Offers that collapse before the SPA Papers: an extension without approval, no CCC, a title restriction, unpaid quit rent Approved plans against the building, an official title search, receipts
Buyers who agree but cannot pay Financing or approvals on the buyer's side Who is buying, how they are paying and which approvals they need

The last two rows cost the most time, because the factory looks sold for weeks and then comes back to the market. Once an SPA is signed the legal steps run on their own deadlines, which I explain in my guide on how long a factory sale takes. This guide is about the part before that: getting a buyer who signs and completes.

Is my asking price above what registered deals support?

Buyers of a semi-detached or detached factory, and the banks lending to them, test the price against registered transactions. These are JPPH-registered figures for the 24 months to August 2026, from FactoryHub's pages for Rawang and Kundang, Serendah and Shah Alam. The psf is per square foot of land, so compare only within the same type.

Area Type Registered deals (24 months) Median price Median psf of land
Rawang and Kundang Semi-detached factory 129 RM4.3 million RM380
Rawang and Kundang Detached factory 16 RM6.92 million RM237
Rawang and Kundang Warehouse 6 RM5.61 million RM147
Serendah Semi-detached factory 28 RM3.16 million RM213
Serendah Detached factory 8 RM8.65 million RM166
Shah Alam Semi-detached factory 66 RM5.92 million RM514
Shah Alam Detached factory 20 RM16 million RM335

Three things in this data explain many stalled sales:

  • The direction of prices. In Shah Alam the like-for-like change (same park, same type) for the last 12 months against the 12 before was -32% for semi-detached factories across 3 parks and -11% for terrace factories across 5 parks. In Rawang and Kundang, industrial land moved +12% across 5 parks. An owner who priced a Shah Alam semi-detached unit from a sale two years ago may be asking for a figure that today's evidence does not show.
  • Thin evidence makes buyers cautious. Eight registered detached factory sales in Serendah and sixteen in Rawang and Kundang over 24 months is little to compare with. For a large detached unit I suggest a valuation by a registered valuer before the price is set, so the buyer's valuer is not the first person to put a number on it.
  • The range is wide. The typical range of registered detached factory prices in Shah Alam ran from RM13.61 million to RM36.2 million, so the median alone does not price your unit. Land size, built-up area, power and condition do.

These counts are the registered records available so far, not every sale. I look at what else is on the market, for example on my Shah Alam factory for sale and Rawang factory for sale pages, only to see the competition a buyer is comparing with. Asking prices are not deals, so they never set the price.

Do the CCC, extensions and fire certificate put buyers off?

Often they do, and later than the price does: these problems usually surface once the buyer's lawyer and bank start work.

  • Building without permission. Section 70(1) of the Street, Drainage and Building Act 1974 says no one may erect a building without the local authority's prior written permission. Under section 70(11), an alteration made without permission can lead to a fine of up to RM25,000 and a court order to alter or demolish it.
  • Occupation without a CCC. Section 70(27)(f) makes it an offence to occupy a building, or let anyone occupy it, without a certificate of completion and compliance, with a fine of up to RM250,000, up to ten years in prison, or both. A buyer who plans to move in or let the factory will ask for the CCC, or the older CF, covering the whole building, extensions included.
  • Which council. Majlis Perbandaran Selayang covers Mukim Rawang, which takes in Rawang and Kundang (MPS). Majlis Perbandaran Hulu Selangor covers Serendah, Bukit Beruntung and Batang Kali (MPHS), and MBSA covers Shah Alam. The Star reported in November 2024 that 6,690 factories in Selangor were operating without valid licences and permits, and that the state's PPKTK legalisation programme offered discounted land premiums, relaxed technical requirements and temporary business licences, with applications closing on 31 December 2025 (The Star). If your factory had approval gaps, ask the council which route is open now before you market it.
  • Fire certificate. Under section 28 of the Fire Services Act 1988, every designated premises needs a fire certificate, renewable every year. A lapsed certificate is a question the buyer's lawyer will raise.

My guides on illegal factory extensions and the Bomba fire certificate explain how each is put right. A factory whose papers match what stands on site can be sold to more buyers, including the many who need a bank loan.

Does the power supply or truck access rule out the buyers in your estate?

A buyer of a semi-detached or detached factory usually arrives with a machine list and a truck plan. Two checks rule a unit in or out within minutes:

  • Power. TNB explains that maximum demand is worked out from the highest consumption in any 30 consecutive minutes of the month, and that it bills a maximum demand charge to its customers at medium and high voltage (TNB). A recent bill therefore shows a buyer the tariff and supply level at a glance. I ask the owner for the latest bills and the rating of the incoming supply before marketing, and I state it in the listing. My kVA to amps guide shows how buyers work out what they need.
  • Access. Gate width, turning space on the road, the height of the loading bay and whether a 40-foot container truck can reach the shutter decide whether logistics and heavier users will look at all. My 40-footer access guide lists the checks.

If the factory cannot take what most buyers in that estate need, there are two honest answers: an upgrade the owner can document, such as a TNB application already filed, or a price and a message aimed at the buyers the unit does suit.

They change who can buy and how long it takes, but they rarely make a factory unsellable.

  • Lease years left. Under section 76 of the National Land Code, state land is alienated for a term not exceeding 99 years or in perpetuity. Buyers and their banks look at the years remaining, but registered data shows leasehold factories still trade: in Shah Alam the median leasehold factory price was RM5.92 million (22 deals) against RM3.36 million for freehold (136 deals), and in Rawang and Kundang RM3.51 million (24 deals) against RM4.1 million (165 deals). That gap mixes location, size and type, not tenure alone. My freehold or leasehold guide goes further.
  • State consent. PTG Selangor says only a title with a restriction in interest needs consent to transfer, the Land Administrator's time is 14 working days with complete documents, consent applications have run fully on e-Tanah since 26 October 2024, and quit rent must be paid before applying. My state consent guide covers the land offices: Gombak for Rawang, Hulu Selangor for Serendah and mostly Petaling for Shah Alam.
  • Bumi lots. A Bumiputera-only title narrows the buyers to those who qualify unless a release is approved; my Bumi lot guide explains how that works.

What helps is saying it early. A listing that states the tenure, the lease expiry year and whether consent is needed filters out the buyers who would otherwise drop out after weeks.

One agent or several: which sells a factory faster?

The Board of Valuers, Appraisers, Estate Agents and Property Managers describes the types of appointment in its estate agency standards (LPPEH, exposure draft on MEAS):

Appointment What it means
Exclusive One firm acts for you, and you pay the agreed fee even if you find the buyer yourself
Sole One firm, but you keep the right to sell yourself without paying it
Joint A limited number of firms, each aware of the others; only the one that closes is paid
Ad hoc (open listing) Any number of firms; a fee is paid only on a successful sale

The same standards require the firm to explain these types before you sign, to make sure you are not left liable for two fees, and to state the period of validity of every exclusive or sole appointment. Other firms that learn of an exclusive or sole appointment must direct their inquiries to the appointed firm, and can bring their buyers through a co-agency arrangement with it.

This is how I explain the trade-off to owners:

  • Several agents on open listing. More people advertise, but the same factory often appears at different prices, with different photos and only part of the papers. Buyers comparing factories in the RM4 million to RM16 million range notice, and some read it as a seller who will take less.
  • One appointed firm. One price, one information pack and one person answering the buyer's lawyer, with other agents bringing buyers through that firm. It only works if the appointment has a fixed period and says what the firm will do: where and in which languages it will advertise, and how often it reports back to you.

Whichever you choose, check each agent on the Board's register, and remember that the appointment is with the firm, not with the individual agent. Fees are covered in my guide to property agent commission for a factory sale.

How do I find buyers who can really pay?

Before a viewing I ask four questions: who is buying (a company or a person, local or foreign), what the factory will be used for, how the purchase will be paid for, and which approvals the buyer needs. Then I look at:

  • Funding. A buyer relying on a loan should be able to name the bank and show the application has started. A cash buyer should be able to show the source through a lawyer. An offer letter with an earnest deposit shows intent.
  • Company approvals. A company buying or selling a large asset may need its shareholders' approval; my factory sale timeline guide explains the section 223 test under the Companies Act 2016.
  • Use. A buyer whose process needs heavier zoning, more power or a licence the council will not give for that lot will drop out later. Matching the use to the unit at the start saves weeks.
  • Manufacturing licence. MIDA says manufacturing companies with shareholders' funds of RM2.5 million and above, or 75 or more full-time paid employees, must hold a manufacturing licence under the Industrial Co-ordination Act 1975 (MIDA). I ask whether the buyer already holds one or is applying.

How do I reach foreign buyers for a factory in Selangor?

Foreign buyers can buy factories here, but their purchase follows its own rules:

  • State approval. Under section 433B of the National Land Code, a non-citizen or foreign company may acquire land only with the State Authority's prior approval, which can carry conditions and a levy. Section 433A counts a Malaysian company as foreign when 50% or more of its voting shares are held by non-citizens or foreign companies. In Selangor the application goes through e-Tanah on the 433B form (PTG Selangor).
  • The federal floor. The EPU guideline on property acquisition bars foreign interests from property worth less than RM1 million a unit, requires commercial units and industrial land of RM1 million and above that they buy to be registered under a local company, and exempts industrial land bought by a manufacturing company from the guideline.
  • Selangor's price bands. PTG Selangor's circular 1/2014 set minimum prices of RM2 million in Petaling, Gombak, Hulu Langat, Sepang and Klang and RM1 million in Kuala Selangor, Kuala Langat, Hulu Selangor and Sabak Bernam, and circular 2/2020 states that these apply to strata and landed strata homes (PTG Selangor circular 2/2020). For a factory, the buyer's lawyer should confirm the current conditions with the land office.

To reach these buyers, the marketing has to work in English and Chinese as well as Malay, and it has to carry what a buyer abroad cannot check by driving past: a summary of the title search, the approved plans and CCC, the TNB bill, a site plan with truck routes and the registered price evidence. My guide on renting a factory to a foreign company covers company checks that apply to foreign buyers too.

What should I fix first before lowering the price?

My order starts with the fixes that cost least and change the most:

  1. Papers. An official title search, this year's quit rent and assessment receipts, the CCC or CF, approved plans that include any extension, and the fire certificate where the premises need one.
  2. Facts in the listing. Land and built-up area, power supply, ceiling height, loading bays, tenure and lease expiry, and whether consent is needed.
  3. Defects a buyer will price in. Roof leaks and stained ceilings, blocked gutters, broken roller shutters, cracked floor slabs, and a compound full of old stock or scrap.
  4. The price. Only after the first three, reset it against registered deals for the same type in the same area.

I would not start a large renovation to suit a buyer's taste: buyers of semi-detached and detached factories usually fit them out for their own process.

Foreign buyers: approvals, minimum price and stamp duty in Selangor

Can a foreign company buy a factory in Rawang or Shah Alam?

Yes. It needs the State Authority's prior approval under section 433B of the National Land Code, which in Selangor is applied for through e-Tanah. The price must meet Selangor's RM3 million minimum for foreigners buying industrial buildings, and the transfer pays a flat 4% stamp duty. Before you sign, have your lawyer confirm any conditions or levy attached to the approval.

What approvals does a foreign buyer need to buy my factory in Selangor?

Mainly one: the State Authority's prior approval under section 433B of the National Land Code, which the buyer applies for through e-Tanah and PTG Selangor decides. If your title has a restriction in interest, state consent to the transfer is also required. As the seller, build the SPA timeline around both approvals and make sure the price meets Selangor's RM3 million minimum for foreigners buying industrial buildings.

Can a Chinese company buy a factory in Rawang or Shah Alam?

Yes, under the same rules as any other foreign company. That covers a company from China and also a Malaysian company with 50% or more of its voting shares held by non-citizens or foreign companies: it needs section 433B approval through e-Tanah, the price must meet Selangor's RM3 million minimum for industrial buildings, and the transfer pays a flat 4% stamp duty. Many buyers form a Malaysian Sdn Bhd first, because the council licence and the TNB account are held by the operating company.

Can a Singapore company buy industrial land in Shah Alam?

Yes. Under the National Land Code a Singapore company is a foreign company, so it needs the State Authority's section 433B approval through e-Tanah before the transfer can be registered, and it pays a flat 4% stamp duty on the transfer. The federal EPU guideline exempts industrial land bought by a manufacturing company, which makes the purpose of the purchase important. Have your lawyer check the title's express conditions, and check the zoning with MBSA.

What restrictions apply to foreign companies buying factories in Selangor?

There are four. A company is treated as foreign when non-citizens or foreign companies hold 50% or more of its voting shares. It must obtain the State Authority's section 433B approval, which can come with conditions and a levy. The price must meet Selangor's RM3 million minimum for foreigners buying industrial buildings, and the transfer pays a flat 4% stamp duty instead of the 1% to 4% scale that applies to Malaysians.

What is the minimum price for a foreigner to buy a factory or industrial property in Selangor?

RM3 million. That is Selangor's minimum for foreigners buying industrial buildings, set by a state circular dated 28 August 2014 and applied in every district, Rawang, Serendah and Shah Alam included. The RM1 million and RM2 million figures people often quote are residential thresholds, while the federal EPU guideline sets a general RM1 million floor for foreign interests. Ask your lawyer to confirm the current circular with PTG Selangor.

If you have a factory in Rawang, Serendah, Kundang or Shah Alam that has been on the market too long, WhatsApp Jason Low, Probationary Estate Agent PEA 1478 with CID Realtors, on +60 12-288 1834.

Questions people ask

01Why has my factory not sold for so long?+

Usually one of five things: the asking price sits above registered deals for the same type, the papers do not match the building, the power or truck access does not suit the buyers in that estate, the title narrows who can buy, or too few serious buyers have seen it. What buyers do after a viewing tells you which one it is: few viewings point to price or reach, offers that collapse point to papers.

02What is the fastest way to sell a factory?+

Have the papers ready before you advertise: an official title search, quit rent and assessment receipts, the CCC or CF, approved plans and the fire certificate where needed. Price against JPPH-registered deals for the same type in the same area, put the power, access and tenure facts in the listing, and qualify each buyer's funding and approvals before the offer letter.

03Should I appoint one agent exclusively or list with several agents?+

Both are allowed. The Board's estate agency standards describe exclusive, sole, joint and open appointments, and an exclusive or sole appointment must state its period of validity. Several agents bring more advertising but often different prices and partial papers; one appointed firm gives one price and one information pack, with other agents bringing buyers through it.

04What repairs should I do before selling my factory?+

Start with what a buyer will price in or a lawyer will raise: roof leaks, blocked gutters, broken roller shutters, cracked floor slabs, a compound full of scrap, and any extension or fire certificate problem. Large renovations to suit a buyer's taste rarely pay back, because buyers of semi-detached and detached factories usually fit them out for their own process.

05Can foreigners buy a factory in Selangor?+

Yes, with conditions. Under section 433B of the National Land Code a non-citizen or foreign company needs the State Authority's prior approval, applied for through e-Tanah in Selangor, and the approval can carry conditions and a levy. The EPU guideline bars foreign interests from property worth under RM1 million a unit and asks that industrial land of RM1 million and above be registered under a local company.

06How do I know a factory buyer can really pay?+

Ask before the viewing who is buying, what for, how they will pay and which approvals they need. A loan buyer should name the bank and show the application has started, a cash buyer should show the source through a lawyer, and an offer letter should come with an earnest deposit. A company buyer may also need its shareholders' approval.

Sources

  1. FactoryHub: Rawang and Kundang JPPH-registered industrial transaction prices and rents
  2. FactoryHub: Serendah JPPH-registered industrial transaction prices and rents
  3. FactoryHub: Shah Alam JPPH-registered industrial transaction prices and rents
  4. Laws of Malaysia: Street, Drainage and Building Act 1974 (Act 133), sections 70(1), 70(11) and 70(27) (AGC reprint)
  5. Laws of Malaysia: Fire Services Act 1988 (Act 341), section 28 (AGC reprint)
  6. The Star: No more excuses for 6,690 unlicensed factories in Selangor, says exco rep (14 November 2024)
  7. Majlis Perbandaran Selayang: Kawasan pentadbiran (Mukim Rawang)
  8. Majlis Perbandaran Hulu Selangor: Latar belakang (Serendah, Bukit Beruntung, Batang Kali)
  9. TNB: Maximum Demand
  10. PTG Selangor: Soalan lazim urusan kebenaran (consent, e-Tanah, section 433B)
  11. National Land Code (Act 828): sections 76, 433A and 433B (PKNS copy)
  12. Unit Perancang Ekonomi: Garis Panduan Perolehan Hartanah (in force from 1 March 2014)
  13. Pekeliling Pengarah Tanah dan Galian Selangor Bilangan 2/2020 on foreign purchase price limits (copy published by Mah Weng Kwai & Associates)
  14. LPPEH (Board of Valuers, Appraisers, Estate Agents and Property Managers): Exposure draft on Malaysian Estate Agency Standards, types of appointment
  15. MIDA: Approvals and licensing (manufacturing licence under the Industrial Co-ordination Act 1975)

Units on the market nearby

More on selling or letting your factory

All guides: Selling or letting your factory →

Probationary Estate Agent · PEA 1478 · CID Realtors Sdn Bhd E(1) 1855About Jason → · Contact →
Ask Jason about this