Can I Run a Car Workshop in a Factory Unit in Rawang, Serendah or Shah Alam? Zoning, Council Licence, Used Oil Rules and What I Check
Yes, if the factory unit sits in a light industrial zone and the council will license a workshop there. Selangor said in February 2026 that new workshop applications will only be approved in light industrial areas. Before signing, check the title, the council's view on that row, drainage for used oil, parking inside the lot and the landlord's consent.
Key Takeaways
- Selangor said in February 2026 that automotive workshops are being moved out of housing areas into designated light industrial zones, and that new applications will only be approved in light industrial areas.
- In Shah Alam, MBSA bars workshops from residential porches, gives home operators 14 days to relocate and fines RM600 for running a business without a licence.
- A terrace or semi-detached factory in a light industrial row is the usual home for a workshop, but the title, the council's view on that row and the landlord's written consent decide whether a given unit works.
- Used engine oil (SW 305), oily interceptor residue (SW 312) and oily rags and filters (SW 410) are scheduled wastes: notify DOE within 30 days, store them for 180 days or less with no more than 20 tonnes on site, and hand them only to a licensed contractor.
- Registered terrace factory rents run from RM0.77 psf a month in Serendah to RM1.79 in Shah Alam, so where your customers drive from matters more than the rent alone.
Can a car workshop operate from a factory unit in Rawang, Serendah or Shah Alam?
Usually yes, and since early 2026 it is where Selangor wants workshops to be. The Star reported on 21 February 2026 that Datuk Ng Suee Lim, the state's local government committee chairman, said automotive workshops are being directed to relocate from residential areas to designated light industrial zones, that most local councils have agreed to set aside areas for them, and that new applications will only be approved if the businesses are located in light industrial areas. The same report quoted Subang Jaya's deputy mayor saying vehicle workshops could only be approved in industrial areas.
So when a workshop owner calls me, the question is no longer "factory or shoplot". It is "which factory row will the council license for a vehicle workshop". An industrial title is the starting point, not the answer. Three layers have to agree: the land use category and express condition on the title, the approved building plans, and the zoning in the council's local plan. I explain how those layers fit together in my guide to light, medium and heavy industry zoning. A terrace row zoned industrial can still face houses across a back lane, and engine noise and oil in the drains are exactly the complaints that started this policy.
Rawang already shows what happens when the zone is right but the paperwork is not. In November 2020 Kosmo reported that MPS counted 62 premises in the Jalan Velox 2 light industrial area, most of them machinery and heavy equipment workshops. Local planning allowed workshops there, yet 17 premises were found unlicensed or with expired licences, were ordered to close at once and compounded RM1,000.
Why are councils moving workshops out of housing areas, and what does it change for tenants?
On 3 April 2026 The Star reported MBSA deputy mayor Safriah Md Adzhar saying automotive workshops are strictly prohibited from operating from the porches or front gates of homes, because of pollution, safety and nuisance, including used engine oil flowing into drains. MBSA's Enforcement Department will direct such operations to stop, give 14 days to relocate and then take legal action. Under MBSA's Trade, Business and Industrial Licensing By-law 2007, running a business without a licence draws a RM600 fine, and ignoring a notice under section 70(12) of the Street, Drainage and Building Act 1974 for unapproved building use brings a RM5,000 fine. Ten unlicensed workshops in Sections 7, 8, 19, 29, 33 and U2 were shut down and fined in 2025.
The February report also gave MBSA's figures under its Vehicle Service Activity Guideline, which covers workshops, car washes, tyre shops and accessory outlets. By July 2025 the council had received 545 applications: 177 approved, 142 given temporary conditional licences, 11 deferred and 215 rejected. About two in five were turned down.
For a tenant, that means two things. A workshop in a housing area will have to move sooner or later, and a licence application from the wrong unit can be refused after the tenancy is already signed. I would rather spend a few days confirming a row with the council than see a client pay a deposit for a unit that cannot be licensed.
Which licences and rules apply to a workshop in a factory unit?
Three sets of rules arrive together, from three different offices.
| Rule | Who enforces it | What it means for the unit |
|---|---|---|
| Business premises licence and signboard licence | The council: MBSA in Shah Alam, MPS or MPHS in the northern areas | The unit's zoning, approved plans and use must allow a workshop |
| Workshop information disclosure | KPDN | A wall near the counter for the mechanics list |
| Scheduled waste rules | DOE | A covered, bunded corner for oil drums, and drains that do not carry oil out |
The council licence. The application, documents, inspection and the usual refusal reasons are in my guide to business premise licences for factories and warehouses. For a workshop, expect the council to look hard at parking, drainage and neighbours.
KPDN's disclosure rules. RTM reported that the Consumer Protection (Workshop Information Disclosure) (Amendment) Regulations 2022, gazetted on 22 June 2022, have been fully enforced nationwide since 1 July 2023. Workshops must display the names of their mechanics and their skills certificates where customers can see them, and must say whether parts are new, used or refurbished. Breaches are dealt with under the Consumer Protection Act 1999.
DOE's scheduled waste rules. The Environmental Quality (Scheduled Wastes) Regulations 2005 list the wastes a workshop produces every week: spent lubricating oil (SW 305), spent hydraulic oil (SW 306), oily residue from automotive workshop, service station oil or grease interceptors (SW 312), lead acid batteries (SW 102), contaminated containers (SW 409), contaminated rags and filters (SW 410) and paint waste (SW 417). The generator must notify the Director General within 30 days of generating new categories and quantities. It may store its own waste for 180 days or less, provided no more than 20 metric tonnes build up on site. Containers must stay closed, carry the generation date and waste code, and incompatible wastes go in separate containers. An inventory is kept for three years, and the waste goes to prescribed premises only, through a licensed contractor.
What do I check on a factory unit for a workshop client?
When a client asks me to shortlist units for a car workshop, I work through the same list on every site visit:
- Title and approved use. Land use category, express condition and approved plans. If the unit has a rear or side extension, I check it was approved, because an unapproved extension can hold up the licence; see my note on illegal factory extensions.
- The council's view on that row. Before any booking fee, I ask the council's licensing and planning units whether a vehicle workshop can be licensed in that row. Councils are setting aside specific zones, so this check costs little and saves the most money.
- Parking inside the lot. Malay Mail reported in December 2025 that MBSA will fine businesses up to RM1,000 under its 2007 licensing by-laws for occupying public parking bays for repairs or displays. I count how many cars fit inside the gate and on the apron, because customers' cars waiting on the road are the first thing neighbours complain about.
- Drains and oil. Where does floor wash water go: a surface drain to the monsoon drain, or a sewer connection? SW 312 exists because interceptors trap oil, so I ask whether the unit has an oil and grease interceptor and who empties it. My factory wastewater guide covers the discharge side.
- Floor and lifts. A two-post lift is bolted into the slab. I ask the landlord for the slab details and let the lift supplier confirm them against its installation manual. Cutting or patching a slab without consent turns into a dispute at handover, which my guide to renovation and reinstatement works explains.
- Power. Compressors, lifts, welding sets and the office air conditioner add up. I note whether the unit has three-phase supply and the rating of the main switch, then size the load with the client using my kVA to amps guide.
- Neighbours and hours. Air tools and engine tests after dark next to houses invite complaints; the night noise limits apply to factories too.
- Fire and storage. Paint, thinner, tyres and batteries stored inside change the fire risk. Whether the unit needs a Bomba fire certificate depends on its size and use, set out in my Bomba fire certificate guide.
- The tenancy clause. The permitted use must say vehicle repair workshop, and the agreement should state who removes oil stains and cleans the drains at the end of the term.
How much does a terrace factory for a workshop cost in my areas?
JPPH-registered tenancies and transfers over the 24 months to August 2026, aggregated by FactoryHub, give these medians for terrace factories:
| Area | Terrace factory rent | Median monthly rent | Terrace factory median sale price |
|---|---|---|---|
| Shah Alam | RM1.79 psf a month | RM4,400 for about 2,600 sq ft (46 tenancies) | RM1.13 million, RM484 psf of land |
| Rawang & Kundang | RM1.06 psf a month | RM2,600 for about 2,400 sq ft (14 tenancies) | RM670,000, RM328 psf of land |
| Serendah | RM0.77 psf a month | RM1,500 for about 2,000 sq ft (20 tenancies) | RM245,000, RM114 psf of land |
These are the registered records available so far, not every deal. In the Serendah data, Bukit Beruntung was the most active industrial park, with 132 registered deals in 24 months; if you are looking there, read my checklist for terrace factories in Bukit Beruntung first. The rent gap between Shah Alam and Serendah is wide, so the deciding question is usually where your customers drive from, not the rent alone.
Where do I start looking for a workshop unit?
I start with terrace and semi-detached rows where the council confirms vehicle workshops are allowed, then check each unit against the list above. Current units are on my pages for factories for rent in Shah Alam, factories for rent in Rawang and factories for rent in Serendah, and the Bukit Beruntung industrial area page covers that estate. A workshop owner who is being moved out of a housing area should start the search before the council's deadline arrives, not after it.
If you need a factory unit for a car workshop in Rawang, Serendah or Shah Alam, WhatsApp Jason Low (Probationary Estate Agent PEA 1478, CID Realtors Sdn Bhd E(1) 1855) on +60 12-288 1834.
Questions people ask
01Can I run a car workshop from my house in Selangor?+
No. In April 2026 MBSA said automotive workshops are strictly prohibited from operating from the porches or front gates of homes, and gives operators 14 days to relocate before legal action. The state said in February 2026 that workshops in residential areas are being directed to light industrial zones.
02Will the council approve a new workshop licence outside a light industrial area?+
Under the state policy announced in February 2026, new applications will only be approved if the business is in a light industrial area. Subang Jaya's council said vehicle workshops could only be approved in industrial areas. Confirm the specific row with your council before you sign a tenancy.
03What is the fine for running a car workshop without a licence in Shah Alam?+
MBSA said a RM600 fine applies for running a business without a licence under its 2007 trade, business and industrial licensing by-law. Ignoring a notice for unapproved building use under section 70(12) of the Street, Drainage and Building Act 1974 brings a RM5,000 fine. Using public parking bays for repairs can draw up to RM1,000.
04Is used engine oil from a workshop scheduled waste?+
Yes. Spent lubricating oil is SW 305 under the Environmental Quality (Scheduled Wastes) Regulations 2005, and oily residue from workshop interceptors is SW 312. You must notify DOE within 30 days, store it for 180 days or less with no more than 20 metric tonnes on site, label it and send it out through a licensed contractor.
05What must a car workshop display to customers?+
Since 1 July 2023 KPDN has fully enforced the Consumer Protection (Workshop Information Disclosure) (Amendment) Regulations 2022. Workshops must display the names of their mechanics and their skills certificates where customers can see them, and state whether parts are new, used or refurbished.
06Can I use the public parking bays outside my factory unit for customers' cars?+
Not in Shah Alam. MBSA said in December 2025 that businesses occupying public parking bays for repairs or displays face fines of up to RM1,000 under its 2007 licensing by-laws. Choose a unit with enough room inside the gate and on the apron for cars waiting for repair.
Sources
- The Star: Workshops to move out of housing areas (21 February 2026)
- The Star: Shah Alam cracks down on vehicle workshops operating from homes (3 April 2026)
- Malay Mail: Shah Alam workshops face RM1,000 fine for illegal use of parking bays (6 December 2025)
- Kosmo: 17 premis di Jalan Velox, Rawang tiada lesen (11 November 2020)
- Berita RTM: Pengusaha bengkel kini perlu pamer senarai nama mekanik (16 July 2023)
- Environmental Quality (Scheduled Wastes) Regulations 2005, P.U.(A) 294/2005 (FAOLEX copy)
- FactoryHub: JPPH-registered industrial transaction prices and rents
Units on the market nearby
Warehouse for Rent in HICOM Glenmarie Industrial, Shah Alam, 85,894 sq ft
RM 210,000/month
Industrial Land for Sale in Eco Ardence, Shah Alam, 2.38 Acres, Freehold
RM 21,771,450
Warehouse for Sale or Rent in Bukit Jelutong, Shah Alam, 143,864 sq ft
RM 88,880,000 · RM 350,000/month
More on licences, bomba and approvals
- How to Check a Factory's Flood Risk in Shah Alam, Rawang and Serendah: Selangor Flood Map Records, Floor Level, Drains, Rivers and Insurance
- Factory for Metal Fabrication, CNC Machining and Stamping in Rawang, Serendah and Shah Alam: Zoning Class, Power, Crane, Floor Loading and DOE Checks
- Food Factory Requirements in Rawang, Serendah and Shah Alam: Building Specs for MeSTI Certification, GMP, HACCP and Halal, and the Steps From Lease to Production
- Manufacturing Licence in Malaysia for a Factory in Rawang, Serendah or Shah Alam: Who Needs One, How to Apply to MIDA, How Long It Takes and What Changes When You Move, Expand or Sell