Food Factory Requirements in Rawang, Serendah and Shah Alam: Building Specs for MeSTI Certification, GMP, HACCP and Halal, and the Steps From Lease to Production

Written by , PEA 1478 · Published · Licences, Bomba and approvals

Short answer

A food factory in Rawang, Serendah or Shah Alam can run from an ordinary industrial unit meeting the Food Hygiene Regulations 2009: impervious, washable floors and walls, drains with food traps flowing from clean to dirty, potable water and hands-free basins. Register with MOH (RM30), get the council licence, then apply for MeSTI (free), GMP, HACCP or halal.

A white single-storey factory opens onto a bright food processing room with an epoxy floor, stainless steel tables and a hand-wash basin, next to an insulated truck at a covered bay.
Illustrative image

Key Takeaways

  • An ordinary industrial unit can work. Rawang, Serendah and Shah Alam have no separate "food zone" rule in the council papers I read: the unit needs industrial status, an approved factory plan with a CF or CCC, and a council willing to license food processing there. The Department of Environment's siting guideline sets distances to homes from 50 m for a medium bakery to 500 m for a slaughterhouse.
  • The building rules sit in the Food Hygiene Regulations 2009. Floors and walls must be impervious and washable, wall to floor joints coved, drains fitted with food traps and flowing from clean to dirty areas, water potable, hand basin taps non-hand operated, and toilets must not open into food rooms.
  • Register the premises with the Ministry of Health (MOH) before you use it. The certificate costs RM30, lasts up to three years and is not transferable, so a previous tenant's registration does not pass to you.
  • Every food manufacturer needs a food safety assurance programme. MeSTI certification is MOH's free minimum scheme, GMP and HACCP are paid MOH certifications, and halal certification from JAKIM or JAIS adds rules on the whole premises, worker housing included, and on Muslim staff.
  • The order matters: check the unit, sign a lease that allows the food fit-out, build, register with MOH, get the council licence, start production, then apply for GMP, HACCP or halal once the system has run for three months.

Can a food factory run in an ordinary industrial area in Rawang, Serendah or Shah Alam?

Usually yes. None of the three councils' licence papers I read asks for a special food estate. What they ask is that the building is an approved factory and that the activity sits where the council allows it:

  • MPHS (Serendah, Sungai Choh, Bukit Beruntung, Batang Kali). Its licence application form says making and processing may only be done in premises with industrial or factory status, that food businesses must be in an area the council permits, that the premises needs a CF or CCC, and that renovated premises need the council Building Department's approval.
  • MPS (Rawang, Kundang). Its approval conditions ask for planning approval, approved building plans, a CF or TCF, and premises that meet the Health Department's and Bomba's requirements.
  • MBSA (Shah Alam). Its special licence checklist, amended in August 2025, has a food industry section that names terrace, semi-detached and detached factories and warehouses, so a food plant in a standard Shah Alam factory is a case the council expects.

Which council covers which estate is set out in my business premise licence guide.

The neighbours matter more than the estate's name. Regulation 12 of the Food Hygiene Regulations 2009 says food premises must be located away from sources of contamination, including aeration ponds, septic tanks and waste disposal sites. JAKIM's halal manual asks for effective controls against contamination from non-halal processing premises, sewage plants and animal farms. The DOE's siting and zoning guideline then sets the overall buffer between a food process and sensitive receptors such as houses:

Food activity in the DOE guideline Category Overall buffer
Slaughterhouses 2 500 m
Processing fish, crustaceans and molluscs 3 250 m
Sugar refining 3 250 m
Fruit and vegetable processing 4 150 m
Dairy products, noodles, chocolate and confectionery, large scale bakery 4 100 m
Medium scale bakery 4 50 m

The guideline also adds a 20 m buffer for auxiliary equipment such as boilers, blowers, gensets, pumps and 1,000 litre fuel storage. So before I look inside a unit for a food client I look outside it: how far the nearest houses are, where the estate's sewage plant and any septic tank sit, and who the neighbours are. A non-halal processor next door does not end a halal plan on paper, but you will have to show JAKIM or JAIS a working control, so I raise it before the deposit is paid. The Rawang Food Industrial Park and RCI Park in Sungai Choh already have food occupiers, which helps, but the checks are the same there. Zoning classes are explained in my light, medium and heavy industry guide and on Ms Teh's light, medium and heavy industry page.

What does the building need: floors, walls, ceilings, doors and lights?

Regulation 13 says food premises must be designed and built to make cleaning and disinfection easy. The regulations that follow turn that into specific surfaces:

Part of the building What the regulations ask What I check on a viewing
Floor (reg 18) Impervious, non-absorbent, washable, non-toxic and adequately drained Bare or coated concrete, cracks, water left standing after washing, falls to the drains
Walls (reg 19) Smooth, impervious and washable up to a height that suits the process; wall to floor angles sealed and coved where necessary Plastered brick or bare blockwork, damp patches, the shared wall of a semi-detached or terrace unit
Ceiling or roof (reg 22) Where there is no ceiling, the underside of the roof and overhead fixtures must not collect dirt, shed particles or encourage condensation and mould Exposed metal roof, rust, roof leaks, nesting birds
Doors (reg 23) Easily cleaned, smooth, non-absorbent and self-closing Roller shutters opening straight into the process area
Lighting (reg 20) Adequate, without contaminating food; MeSTI's element checklist and JAKIM both expect covered lights in processing areas Open tubes hanging over the line
Fittings (reg 24) Impervious, easily cleaned surfaces in processing areas Timber shelves, painted mild steel tables

Regulations 18 and 19 let MOH accept other materials if the operator satisfies the Director that they are appropriate, and regulation 15(7) lets MOH order structural alteration, repair, renovation, plumbing or drainage work within a set time. For a tenant that last rule matters: if the lease forbids alterations, you can end up caught between a health officer's order and the landlord. I ask for written consent to the food fit-out before my client signs, and I check the reinstatement clause, which my renovation and reinstatement guide explains. Cold rooms, racking and heavy mixers also load the slab, so check the floor rating with my floor loading guide.

What drainage does a food factory need?

Drains are the part I look at hardest when a general factory is being turned to food use. Regulation 29 asks for drainage that is adequate and designed to avoid any risk of contaminating food. In food preparation areas the drains must be made of smooth material, fitted with a food trap and connected to the main outlet drain. The channels must be fully or partially open and laid so that waste never flows from a contaminated area towards a clean one, and regulation 18 adds that floors must be adequately drained. MeSTI's checklist asks auditors to look for standing water on floors and a cleaning schedule and records for drains.

The councils add their own layer. MPHS makes it a licence condition that any effluent or sewage passes through a food or grease trap before it reaches the sewer or a septic tank, and that the trap is maintained and working whenever the business runs; food premises also hand in a receipt for the oil trap device with the application. MBSA asks a food factory for photographs of the grease trap at the sinks and the equipment washing area, and of the chimney or exhaust fan.

A grease trap does not settle what happens to process wastewater. Whether yours may go to the public sewer or needs treatment first is covered in my factory wastewater guide. On a viewing I ask the landlord for the as-built drainage plan, find where the outlet runs, confirm whether the unit drains to the public sewer or a septic tank, and ask whether new floor channels may be cut into the slab.

Water, air, hand basins, toilets and storage: what else will MOH look at?

  • Water (reg 14). An ample supply of potable water with storage and distribution, protected against contamination. MeSTI also wants covered water containers, ice and steam made from safe water, and a water analysis report if the supply does not come from the public water authority. Cleaning facilities need hot and cold potable water where necessary (reg 15(4)).
  • Ventilation (reg 21). Filters and parts that need cleaning must be easy to reach, and mechanical airflow must never run from a contaminated area to a clean one.
  • Hand basins (reg 27). Enough of them, in the right places, with running water, soap in a dispenser, paper towels or a dryer and non-hand operated taps, and separate basins for washing hands and washing food.
  • Toilets and changing (regs 26 and 28). Toilets must not open directly into any room used to store, produce or serve food, and a changing room is required where necessary.
  • Storage (reg 25). Separate stores for raw materials and processed food. Chilled or frozen food needs separate refrigerated storage for raw and processed goods, a smooth, light coloured, impervious inner lining, a thermometer accurate to plus or minus 1°C, and an air curtain or similar on cold room doors. Cold rooms change your power needs, so size them with my kVA to amps guide.
  • Refuse (reg 17). Closable containers and a refuse store kept clean and free of pests.

Is a cleanroom needed for a food factory?

Not under the documents I read for this guide. The Food Hygiene Regulations 2009, the MeSTI element checklist and JAKIM's manual ask for surfaces that clean easily, a layout that prevents cross contamination, airflow from clean to dirty areas and separate raw and finished stores. None of them asks for a classified cleanroom. MOH's GMP scheme is built on Malaysian Standard MS 1514, so if a buyer, an export market or your product asks for high-care zones or a cleanroom, get that requirement in writing before you choose the unit, because air handling, ceiling height and power all change with it.

What is MeSTI certification, and how do GMP, HACCP and halal compare?

Regulation 9 and the Third Schedule require every food manufacturing premises to keep a food safety assurance programme. MeSTI (Makanan Selamat Tanggungjawab Industri, "food safety is the responsibility of the industry") is the scheme MOH introduced so that small and medium makers can meet that minimum, as its MeSTI guideline explains. Here is how the options line up:

Scheme Who issues it What you need first Fee Valid for
Food premises registration MOH, online on FoSIM, category P1 for manufacturing Nothing, but it must be in place before the premises is used RM30 Up to 3 years, not transferable
MeSTI MOH, audited by the State Health Department or district health office MOH registration, SSM registration, council licence Free 3 years, revoked if the premises moves
GMP MOH Registration, council licence, SSM, a GMP system to MS 1514 running at least 3 months New: RM4,700 large, RM3,500 SME, RM2,300 micro 3 years
HACCP MOH The same, with HACCP to MS 1480 and GMP prerequisites running at least 3 months New: RM5,400 large, RM4,000 SME, plus RM3,420 auditor travel in Peninsular Malaysia Renewal RM4,000 or RM3,000
Halal (SPHM) JAKIM or JAIS, decided by scheme and factory address SSM, council licence, MOH registration, 3 months of full operation RM20 processing, then RM100 a year (turnover under RM300,000) up to RM1,000 a year (over RM50 million) 2 years for food products

For MeSTI you apply with your process flow chart and product list, an auditor checks the premises against the ten elements, and applicants who are not ready get coaching and must build the programme within six months. Non-conformances must be closed within three months of the audit, and monitoring audits follow at least once a year. Holders of an MOH or accredited GMP or HACCP certificate get MeSTI without a field audit. MOH's GMP page defines a large company as 150 or more full-time staff with sales of RM25 million or more.

Halal reaches furthest into the building. Under JAKIM's manual, the whole premises, including the office, canteen and worker housing, must be free of non-halal material such as alcohol and pork; the site must be fenced or otherwise protected against pets, wild animals and pests; raw materials sit on pallets, not on the floor; lights in processing areas are covered; and a layout plan must show how cross contamination is prevented. Worker housing should not be inside the premises. If it must be, it goes in a separate building, or in the same building with a separate entrance and no direct route into processing, and MPHS separately forbids using licensed premises as private accommodation. Large and medium makers need at least two permanent Malaysian Muslim staff in the processing area on every shift and a Halal Executive; small and micro makers need at least one. The amended manual in force from 1 April 2026 keeps these rules and the fees.

Steps from renting a unit to the first production run

  1. Write the process down before viewing. Products, raw or ready to eat, chilled or frozen, halal or not, export or local, daily water use and wastewater, and the machine load. That brief decides the DOE category, the drains and the power.
  2. Shortlist by council and distance. I check the title's land use, the approved plan, the CF or CCC and the latest assessment bill, then map the nearest houses, the estate sewage plant and the neighbours in Rawang, Serendah or Shah Alam.
  3. View with the hygiene checklist. Floors, walls, the underside of the roof, drains, the water tank, toilets that open into the hall, and room for a changing area and separate raw and finished stores.
  4. Sign a lease that outlasts the certificates. JPPH-registered factory tenancies in the 24 months to August 2026 show a typical term of 24 months in Rawang and Kundang (median rent RM1.39 psf/month), 21 months in Serendah (RM0.95 psf/month) and 24 months in Shah Alam (RM1.71 psf/month); see the Rawang, Serendah and Shah Alam figures. MeSTI and GMP run three years and halal two, MeSTI is revoked when you move, and a relocated halal applicant must run one month at the new site before applying. A two-year lease with no renewal option can end before your first certificate cycle does, so I ask for a renewal option, a rent-free fit-out period and written fit-out consent, as in my rent negotiation guide.
  5. Fit out with approvals. Renovations and partitions need council approval; MPHS asks for the renovation approval receipt or a temporary building permit with the licence application. Bomba approvals run alongside.
  6. Register the premises with MOH on FoSIM as a P1 manufacturing premises before you use it.
  7. Train and vaccinate food handlers. Regulations 30 and 31 require a food handler training certificate from an MOH-specified institution, a medical examination and vaccination; the councils ask for the typhoid (TY2) and course certificates.
  8. Apply for the council licence. MBSA's food list asks for the staff list with IC or passport and visa, TY2 and course certificates or food handler cards, grease trap and exhaust photos, an i-Gred payment receipt, a current pest control report and the MOH registration. MPHS asks industrial applicants for a waste contractor letter, DOE approval for activities that produce waste, Bomba approval and DOSH machinery certificates.
  9. Start production and the records together. Keep cleaning, processing, storage and distribution records from day one (reg 11) and a traceability system one step back and one step forward (reg 10). Apply for MeSTI once the council licence is in hand, and for GMP, HACCP or halal after three months of running.

If you are planning a food factory in Rawang, Serendah, Sungai Choh, Kundang or Shah Alam and want units checked against this list, WhatsApp Jason Low, Probationary Estate Agent PEA 1478 with CID Realtors, on +60 12-288 1834.

Cold rooms and cold chain warehouses

Where can I rent a cold room warehouse in Rawang, Serendah or Shah Alam?

A cold room warehouse in Rawang, Serendah or Shah Alam is a standard industrial unit with insulated cold rooms fitted inside, not a separate property type, so you look at ordinary industrial units. Parks such as Rawang Food Industrial Park and RCI Park in Sungai Choh are worth checking. Confirm that the unit's power supply can carry the refrigeration load, and ask the landlord for the floor loading and whether the lease allows a cold room to be installed.

Where can I buy a cold chain logistics warehouse in Rawang, Serendah or Shah Alam?

Cold chain logistics warehouses for sale in Rawang, Serendah and Shah Alam are ordinary industrial warehouses that the buyer fits with refrigerated storage, not a separate listing type. Check that the unit has warehouse or factory status, an approved plan and a CF or CCC, and confirm with MPS, MPHS or MBSA that cold storage and logistics are allowed there. Check the power capacity and floor loading as well before you commit.

Questions people ask

01Can I open a food factory in a normal industrial area in Rawang, Serendah or Shah Alam?+

Usually yes, if the unit has industrial or factory status, an approved factory plan and a CF or CCC, and the council will license food processing there. MPHS says food businesses must be in an area it permits, and MBSA has a food industry checklist for terrace, semi-detached and detached factories and warehouses. Check the distance to the nearest houses too: the DOE guideline asks for 50 m to 500 m depending on the food process.

02Do I need a cleanroom for a food factory in Malaysia?+

The Food Hygiene Regulations 2009, MOH's MeSTI element checklist and JAKIM's halal manual do not ask for a classified cleanroom. They ask for easily cleaned surfaces, a layout that prevents cross contamination, airflow from clean to dirty areas and separate raw and finished stores. If a buyer, export market or product needs high-care zones, get that specification in writing before you choose a unit.

03What is MeSTI certification and how much does it cost?+

MeSTI (Makanan Selamat Tanggungjawab Industri) is the Ministry of Health's minimum food safety assurance scheme for food manufacturers, aimed at small and medium makers. It is free, lasts three years and needs MOH food premises registration, SSM registration and a council licence first. Holders of GMP or HACCP certificates get it without a field audit.

04What does a factory need to be GMP certified for food?+

MOH's GMP certification is based on MS 1514, and the building must first meet the Food Hygiene Regulations 2009 on floors, walls, drains, water and toilets. The premises must be registered with MOH, licensed by the council and registered with SSM, and the GMP system must run for at least three months before you apply. New applications cost RM4,700 for large companies, RM3,500 for SMEs and RM2,300 for micro companies, and the certificate lasts three years.

05Does a food factory need a grease trap?+

In food preparation areas the Food Hygiene Regulations 2009 require drains of smooth material fitted with a food trap and connected to the main outlet drain, with waste never flowing from dirty to clean areas. MPHS makes a working food or grease trap before the sewer or septic tank a licence condition, and MBSA asks for photographs of the grease trap with the licence application.

06How many Muslim workers does a halal food factory need?+

Under JAKIM's manual, large and medium makers need at least two permanent Malaysian Muslim staff in the processing area on every shift, plus a Halal Executive and an internal halal committee. Small makers need at least one, plus a Halal Supervisor, and micro makers at least one. The amended manual in force from 1 April 2026 keeps these numbers.

07Where in Rawang, Serendah or Shah Alam can I find ready-built food processing factories for sale?+

Ready-built food processing factories are not sold as a separate category in Rawang, Serendah or Shah Alam. The usual route is to buy a standard industrial unit and fit it out to the food rules. Rawang Food Industrial Park and RCI Park in Sungai Choh already have food occupiers. Before you buy, check that the unit has industrial status, an approved factory plan and a CF or CCC, and confirm with MPS, MPHS or MBSA that food processing is allowed at that address.

Sources

  1. Food Hygiene Regulations 2009 (regulations 3 to 31; First, Second and Third Schedules)
  2. Ministry of Health: Pendaftaran Premis Makanan (categories P1 to P4, FoSIM, three-year validity)
  3. Ministry of Health, Food Safety and Quality Programme: Makanan Selamat Tanggungjawab Industri (MeSTI)
  4. Ministry of Health: Guidelines on the MeSTI Certification Scheme (English, uploaded 14 July 2026)
  5. Ministry of Health: MeSTI element checklist, MeSTI-3/12-02
  6. Ministry of Health: GMP certification scheme (MS 1514, fees, validity, company size definitions)
  7. Ministry of Health: HACCP certification scheme (MS 1480, fees, auditor travel cost)
  8. JAKIM: Manual Prosedur Pensijilan Halal Malaysia (Domestik) 2020
  9. JAKIM: Pekeliling Pensijilan Halal Malaysia Bilangan 1 Tahun 2026, amended MPPHM 2020 in force 1 April 2026
  10. Department of Environment: Guidelines for the Siting and Zoning of Industry and Residential Areas, second revised edition, October 2012 (copy)
  11. Majlis Perbandaran Hulu Selangor: Borang komposit permohonan lesen premis perniagaan dan iklan, documents and conditions
  12. Majlis Perbandaran Selayang: Memohon lesen / permit lesen sementara, approval conditions
  13. Majlis Bandaraya Shah Alam: Senarai semak (khusus) lesen komposit, Lampiran 9 food industry premises (amended August 2025)
  14. FactoryHub: Rawang and Kundang JPPH-registered transaction prices and rents (to August 2026)
  15. FactoryHub: Serendah JPPH-registered transaction prices and rents (to August 2026)
  16. FactoryHub: Shah Alam JPPH-registered transaction prices and rents (to August 2026)

Units on the market nearby

More on licences, bomba and approvals

All guides: Licences, Bomba and approvals →

Probationary Estate Agent · PEA 1478 · CID Realtors Sdn Bhd E(1) 1855About Jason → · Contact →
Ask Jason about this